

Noise reduction microphone
- Size
- 103 × 60 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 52
- Nets
- 48
- Pads
- 219
- Tracks, vias
- 327, 196
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 16 Oct 2025
- Updated
- 24 Oct 2025
Overview
Noise reduction microphone is an open-source printed circuit board by LeoMH, from the LeoMH/noise_reduction_microphone repository on GitHub. It is a 4-layer board of 103 × 60 mm with 52 parts on 48 nets, routed with 327 tracks and 196 vias.
It is built around the MMICT3902-00-012, PCM5101APW and B0530W. Its parts include 17 capacitors, 5 ICs, 2 resistors, 2 connectors and 1 diode. It belongs with the audio and music boards and the RP2040 boards of this library.
Main components
3MMICT3902-00-012
-- MEMS Microphones ROHSTDK InvenSenseMEMS MicrophonesPCM5101APW
TSSOP-20-25℃~+85℃ 0.8mA 1.8V~3.6V 2 32 Digital filtering、Power-down mode I2S TSSOP-20 ADCs/DACs - Special Purpose ROHSTexas InstrumentsADCs/DACs - Special PurposeB0530W
SOD-123-65℃~+125℃ 1 Independent 130uA@30V 30V 430mV@500mA 5.9A 500mA SOD-123 Schottky Diodes ROHSDiodes IncorporatedSchottky Diodes
Parts
52| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 100nF | PCM_JLCPCB:C_0603 | C4, C5, C6, C9, C13, C14, C15, C16, C17 |
| 4 | 10uF | PCM_JLCPCB:C_0603 | C1, C2, C3, C12 |
| 4 | MIC4 Select | Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP2, JP3, JP4, JP5 |
| 4 | MMICT3902-00-012 | Samacsys:MMICT390200012 | IC1, IC2, IC3, IC4 |
| 4 | MountingHole | MountingHole:MountingHole_3mm | H1, H2, H3, H4 |
| 2 | 2.2nF | PCM_JLCPCB:C_0603 | C10, C11 |
| 2 | 2.2uF | PCM_JLCPCB:C_0603 | C7, C8 |
| 2 | 470Ω | PCM_JLCPCB:R_0603 | R1, R2 |
| 1 | 3V | TestPoint:TestPoint_Pad_D2.0mm | TP2 |
| 1 | 5V | TestPoint:TestPoint_Pad_D2.0mm | TP1 |
| 1 | AUDIO_GND | TestPoint:TestPoint_Pad_D2.0mm | TP12 |
| 1 | AUDIO_L | TestPoint:TestPoint_Pad_D2.0mm | TP11 |
| 1 | AUDIO_R | TestPoint:TestPoint_Pad_D2.0mm | TP10 |
| 1 | B0530W | PCM_JLCPCB:D_SOD-123 | D1 |
| 1 | BCLK | TestPoint:TestPoint_Pad_D2.0mm | TP15 |
| 1 | CLK1 | TestPoint:TestPoint_Pad_D2.0mm | TP7 |
| 1 | CLK2 | TestPoint:TestPoint_Pad_D2.0mm | TP8 |
| 1 | DAC_DIN | TestPoint:TestPoint_Pad_D2.0mm | TP14 |
| 1 | Debug Header | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J2 |
| 1 | Diode Bypass | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | GND | TestPoint:TestPoint_Pad_D2.0mm | TP9 |
| 1 | MIC1_OUT | TestPoint:TestPoint_Pad_D2.0mm | TP3 |
| 1 | MIC2_OUT | TestPoint:TestPoint_Pad_D2.0mm | TP4 |
| 1 | MIC3_OUT | TestPoint:TestPoint_Pad_D2.0mm | TP5 |
| 1 | MIC4_OUT | TestPoint:TestPoint_Pad_D2.0mm | TP6 |
| 1 | PCM5101A | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U1 |
| 1 | Power/Audio | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J1 |
| 1 | RaspberryPi_Pico | Module:RaspberryPi_Pico_SMD_HandSolder | A1 |
| 1 | WS | TestPoint:TestPoint_Pad_D2.0mm | TP13 |
Similar boards
- 6 layers144.7 × 92.3 mm

- 6 layers133.1 × 133.1 mm

AERIS H743-PCB
7903555032/AERIS-H743-PCB
A 6-layer STM32H743-based embedded development and flight-control/data-logging PCB designed as a practical hardware-design and PCB-layout project.
114 parts1 - 2 layers75 × 36.1 mm

Controle
ZeniteSolar/MAM21
Dados os requisitos e especificações apresentadas anteriormente, foi definido que a topologia utilizada será um conversor chopper, por não haver necessidade de elevação de tensão e por este permitir a variação da tensão…
83 parts1GPL-3.0 - 4 layers85 × 56 mm

- 4 layers100 × 100 mm

- 2 layers40.6 × 25.5 mm

PCM510xA I2S DAC
CedarGroveStudios/PCB_PCM510xA_I2S_DAC
An I2S stereo audio DAC with an internal master clock PLL and a charge pump for direct-coupled ground-centered audio output.
34 parts1 - 2 layers56 × 80 mm

- 2 layers134.3 × 80.6 mm

Questions
How big is the Noise reduction microphone PCB?
It measures 103 × 60 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Noise reduction microphone use?
52 parts, built around the MMICT3902-00-012, PCM5101APW and B0530W. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Noise reduction microphone KiCad files?
From the LeoMH/noise_reduction_microphone repository on GitHub, at the commit this page was made from: the board is noise_reduction_microphone.kicad_pcb and its schematic microphone.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Noise reduction microphone design in my own project?
Its repository states no licence, so its author keeps all rights: ask LeoMH before reusing the design.