

EDID spoofer
Simple board that can act as dummy plug or can override EDID of a display, or access VESA DDC interface externally.
- Size
- 33 × 47.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 13
- Nets
- 21
- Pads
- 65
- Tracks, vias
- 108, 58
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 18 Jun 2024
- Updated
- 21 Jun 2024
Overview
EDID spoofer is an open-source printed circuit board by Leo-PL, from the Leo-PL/EDID-spoofer repository on GitHub, published under the Unlicense licence. It is a 2-layer board of 33 × 47.6 mm with 13 parts on 21 nets, routed with 108 tracks and 58 vias.
It is built around the 24LCS22A-I/P. Its parts include 3 resistors, 3 connectors, 1 capacitor and 1 IC. It belongs with the lEDs and displays boards of this library.
Main components
1README
README.mdEDID Spoofer
A simple board, that helps tinkering with VESA DDC
- Override EDID on a display for custom resolutions
- Provide a EDID to the PC for sinks which lack EDID, like with BNC inputs
- Act as a dummy plug for servers for Intel AMT
- Sniff or interfere with DDC communication between the graphics card and the display
Parts used:
- 1x DE-15HD THT plug (towards graphics card).
- 1x DE-15HD THT receptacle (towards display).
- 24LCS22A, 24LC21A, or compatible VESA DDC1/DDC2 EEPROM. A generic 24C02 should work too.
- 1 3x 10k 0805 SMD resistors.
- 1x 100nF 0805 SMD capacitor.
- Generic 4-pin header for programming or external bus access.
Programming
First programming can be done even if write protection is enabled, which is set by default using JP1 jumper. Chip locks itself when address 0x7F (the EDID checksum) is written. For programming, you can use SNANDer, i2c-tools or any other tool compatible with I²C EEPROMs. If using ordinary 24C02, be sure to keep WP pin low, as this is A2 pin on that part, otherwise chip address won't match. DDC1 and write protection also won't work in this case.
Redistribution
Project contents are freely redistributable in any form. Please see the license.
Parts
13| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 10k | Resistor_SMD:R_0805_2012Metric | R1, R2, R3 |
| 2 | SolderJumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP2, JP3 |
| 2 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP4, JP5 |
| 1 | 100n | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | 24LCS22A | Package_SO:SO-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | DE15_Plug_HighDensity_MountingHoles | Connector_Dsub:DSUB-15-HD_Male_Horizontal_P2.29x1.98mm_EdgePinOffset8.35mm_Housed_MountingHolesOffset10.89mm | J1 |
| 1 | DE15_Receptacle_HighDensity_MountingHoles | Connector_Dsub:DSUB-15-HD_Female_Horizontal_P2.29x1.98mm_EdgePinOffset8.35mm_Housed_MountingHolesOffset10.89mm | J2 |
| 1 | SolderJumper_3_Bridged12 | Jumper:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm_NumberLabels | JP1 |
Similar boards
- 2 layers40 × 20 mm

- 2 layers74.9 × 49.5 mm

- 2 layers35 × 29 mm

MagSpoofTC
samyk/magspoof
A portable device that can spoof/emulate any magnetic stripe, credit card or hotel card "wirelessly", even on standard magstripe (non-NFC/RFID) readers.
13 parts4.2k - 2 layers20.6 × 23.6 mm

AO-03 signal amplifier
fossasia/pslab-scripts
Pocket Science Lab - Scripts for Sensor Experiments
13 parts1.6kApache-2.0 - 2 layers47 × 35.6 mm

- 2 layers95 × 95 mm

Cube batteryboard
willem-pennings/balancing-cube
A cube that balances itself in a corner or edge using reaction wheels
13 parts1.1kGPL-3.0 - 2 layers15.2 × 20.3 mm

Pt100stick
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
13 parts1.1kGPL-3.0 - 2 layers53.9 × 23.2 mm

Buffer
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
13 parts1kGPL-3.0
Questions
How big is the EDID spoofer PCB?
It measures 33 × 47.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the EDID spoofer use?
13 parts, built around the 24LCS22A-I/P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the EDID spoofer KiCad files?
From the Leo-PL/EDID-spoofer repository on GitHub, at the commit this page was made from: the board is EDID_spoofer.kicad_pcb and its schematic EDID_spoofer.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the EDID spoofer design in my own project?
Its repository publishes it under the Unlicense licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).