Skip to the content
2 layers76.2 × 34 mmWaveform blinky, the printed circuit board in 3D

Waveform demo PCB with a blinky output for students

Size
76.2 × 34 mm
Copper layers
2
Thickness
2.45 mm
Parts
27
Nets
15
Pads
65
Tracks, vias
102, 12
Pours
3
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
19 Jul 2024
Updated
15 May 2025

Overview

Waveform blinky is an open-source printed circuit board by LeemanGeophysicalLLC, from the LeemanGeophysicalLLC/waveform_blinky repository on GitHub, published under the MIT licence. It is a 2-layer board of 76.2 × 34 mm with 27 parts on 15 nets, routed with 102 tracks and 12 vias.

Its parts include 11 resistors, 3 capacitors, 3 ICs, 2 diodes and 1 connector.

README

README.md

waveform_blinky

Waveform demo PCB with a blinky output for students

Parts

27
QtyValueFootprintReferences
51-0000010resistors_0603:1-0000010R4, R6, R7, R10, R11
31-0000018capacitors_0603:1-0000018C1, C2, C3
31-0000174resistors_0603:1-0000174R1, R2, R3
31-0001650amplifiers:1-0001650U1, U2, U3
3TestPointnp_connectors:NP_Conn_ProtoPadTP3, TP4, TP5
21-0000008resistors_0603:1-0000008R8, R9
21-0001603leds_th:1-0001603D1, D2
2TestPointTestPoint:TestPoint_Pad_4.0x4.0mmTP1, TP2
11-0000079resistors_0603:1-0000079R5
1LOGOpcb_graphics:PCB Logo StandardG***
1NP_Conn_01x02_Reliefnp_connectors:SolderWire_1x02_ReliefJ1
1barepcbmisc:barepcbPCB1

Similar boards

  • 2 layers47.6 × 27.3 mmMmc usb 1, the printed circuit board in 3D

    Mmc usb 1

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    27 parts1.2k
  • 2 layers77.4 × 77.4 mmCORAZON LEDS CON FADE, the printed circuit board in 3D

    CORAZON LEDS CON FADE

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    27 parts915
  • 2 layers44.2 × 29.3 mmI2c tiny usb, the printed circuit board in 3D

    I2c tiny usb

    harbaum/I2C-Tiny-USB

    Cheap and simple I²C to USB interface

    27 parts454
  • 2 layers22 × 42 mmNvme bm to e, the printed circuit board in 3D

    Nvme bm to e

    CRImier/MyKiCad

    My KiCad boards. Can't be bothered uploading individually anymore, so here you go.

    27 parts253GPL-3.0
  • 2 layers80 × 61 mmPicoProducer, the printed circuit board in 3D

    PicoProducer

    pjgpetecodes/pico-streamdeck

    This project is an OBS Controller using a Raspberry Pi Pico and CircuitPython.

    27 parts230MIT
  • 2 layers186 × 45 mmAddOnD, the printed circuit board in 3D

    AddOnD

    freeDSP/freeDSP-aurora

    freeDSP ADAU1452 with 8 analog input, 8 analog outputs, S/P-DIF I/O, ADAT I/O, USB Audio Class2, WiFi, Bluetooth

    27 parts226CC-BY-SA-4.0
  • 2 layers29.6 × 40.6 mmDbwifi revB, the printed circuit board in 3D

    Dbwifi revB

    ugcs/ddc

    Drone Show Software is software designed for drone shows, allowing flight path planning as well as control of dozens of drones simultaneously in a synchronized manner.

    27 parts223

Questions

How big is the Waveform blinky PCB?

It measures 76.2 × 34 mm and has 2 copper layers, 2.45 mm thick.

What parts does the Waveform blinky use?

27 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Waveform blinky KiCad files?

From the LeemanGeophysicalLLC/waveform_blinky repository on GitHub, at the commit this page was made from: the board is KiCAD_Project/Waveform_Blinky.kicad_pcb and its schematic KiCAD_Project/Waveform_Blinky.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Waveform blinky design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).