Skip to the content
4 layers107.9 × 69.9 mmOpen Field Logger Lab, the printed circuit board in 3D

Open source logger lab kit for scientists and engineers

Size
107.9 × 69.9 mm
Copper layers
4
Thickness
2.45 mm
Parts
62
Nets
59
Pads
188
Tracks, vias
366, 40
Pours
3
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
12 Jun 2026
Updated
8 Jul 2026

Overview

Open Field Logger Lab is an open-source printed circuit board by LeemanGeophysicalLLC, from the LeemanGeophysicalLLC/Open_Field_Logger_Lab repository on GitHub, published under the MIT licence. It is a 4-layer board of 107.9 × 69.9 mm with 62 parts on 59 nets, routed with 366 tracks and 40 vias.

Its parts include 18 resistors, 14 connectors, 6 capacitors, 4 ICs and 4 diodes.

README

README.md

Open Field Logger Lab

Open Field Logger Lab is a low-cost educational data logger from Leeman Geophysical for learning basic field data logging with 0-5 V analog sensors.

It is designed for students to assemble, test, and use during field measurement projects for our GEARS workshops and to then have a useful tool after the course. The goal is to teach practical instrumentation concepts without turning the logger itself into the main project.

Purpose

This project is intended to help students learn:

  • through-hole soldering
  • sensor wiring
  • analog voltage measurement
  • calibration
  • sampling rate tradeoffs
  • SD card data logging
  • basic field deployment practices
  • the effect of real-world conditions on measurements

The logger is intentionally simple, low-cost, and easy to modify.

What this is not

Open Field Logger Lab is not a precision commercial data logger. It is not intended for safety-critical measurements, unattended long-term monitoring, harsh environmental deployment, or calibrated scientific measurements without additional validation.

It is a teaching platform for learning how field logging works.

Hardware overview

Rev A is built around:

  • USB-C ESP32 DevKit-style microcontroller module
  • ADS1115 16-bit ADC
  • four nominal 0-5 V analog single ended inputs
  • microSD card logging
  • battery-backed real-time clock
  • 9-18 VDC input power
  • 5 V sensor power output
  • simple status LEDs
  • optional onboard NTC temperature divider

The analog inputs are intended for simple voltage-output sensors, signal conditioning circuits, and student-built measurement experiments.

Student assembly philosophy

Students solder only through-hole parts. Surface-mount parts are assembled before the workshop for time concerns. We do, however, have a surface mount soldering challenge for those that want to try SMT!

The through-hole assembly includes parts such as connectors, fuse clips, power components, sockets, and selected educational components.

Repository contents

Planned contents:

text
hardware/      KiCad design files, schematics, PCB layout, fabrication outputs, BOM
firmware/      ESP32 firmware for logging and self-test
docs/          Datasheets and other relevant files as well as assembly instructions
examples/      Example CSV files and simple analysis notebooks/scripts

Parts

62
QtyValueFootprintReferences
121-0000010resistors_0603:1-0000010R3, R5, R6, R7, R8, R9, R10, R11, R15, R16, R17, R18
61-0001899connectors:1-0001899J1, J10, J11, J12, J13, J14
4Imperial4mechanical:MountingHole_imperial4H1, H2, H3, H4
31-0000007capacitors_0603:1-0000007C2, C5, C6
31-0000163mosfets:1-0000163Q1, Q2, Q3
21-0000008resistors_0603:1-0000008R2, R4
21-0000174resistors_0603:1-0000174R12, R13
21-0001894connectors:1-0001894J2, J3
21-0001902capacitors_0603:1-0001902C3, C4
2Fiducial_1mm_2mmmechanical:Fiducial_1mm_Mask2mmFID1, FID2
11-0000019capacitors_0603:1-0000019C1
11-0000127connectors:1-0000127J8
11-0000369resistors_0603:1-0000369R1
11-0000599leds_0805:1-0000599D2
11-0000600leds_0805:1-0000600D4
11-0000681switches:1-0000681SW1
11-0000863batteries:1-0000863BT1
11-0001184resistors_0603:1-0001184R14
11-0001188leds_th:1-0001188D1
11-0001890microcontrollers:1-0001890U2
11-0001891adcs:1-0001891U4
11-0001892rtcs:1-0001892U3
11-0001893dc_dc_converters:1-0001893U1
11-0001895misc:misc_componentMI1
11-0001896diodes:1-0001896D3
11-0001897sensors:1-0001897TH1
11-0001901crystals_resonators:1-0001901Y1
1AUX Inputnp_connectors:PinHeader_1x04_P2.54mm_VerticalJ4
1Conn_01x01np_connectors:NP_Conn_ProtoPadJ9
1LOGOpcb_graphics:PCB Logo StandardG***
1NP_Conn_01x03np_connectors:PinHeader_1x03_P2.54mm_VerticalJ5
1NP_Conn_01x04np_connectors:PinHeader_1x04_P2.54mm_VerticalJ7
1NP_Conn_01x06np_connectors:PinHeader_1x06_P2.54mm_VerticalJ6
1barepcbmisc:barepcbPCB1

Similar boards

  • 4 layers25.4 × 25.4 mmTwonkie, the printed circuit board in 3D

    Twonkie

    dojoe/Twonkie

    A USB-PD sniffer/injector/sink based on Google's Twinkie, re-designed to be manufactured by mere mortals.

    62 parts415
  • 4 layers48 × 80 mmBoard latest, the printed circuit board in 3D

    Board latest

    dennisss/dacha

    Monorepo for awesome tools/projects/libraries

    62 parts397Apache-2.0
  • 4 layers138 × 50 mmBackpack, the printed circuit board in 3D

    Backpack

    osrf/ovc

    the Open Vision Computer

    62 parts207Apache-2.0
  • 4 layers57 × 85 mmHmcad characterization, the printed circuit board in 3D

    Hmcad characterization

    azonenberg/starshipraider

    Open hardware test equipment

    62 parts193BSD-3-Clause
  • 4 layers22.5 × 12 mmTurnipschool, the printed circuit board in 3D

    Turnipschool

    mossmann/cc11xx

    Hardware designs for CC11xx

    62 parts104GPL-2.0
  • 4 layers90 × 40 mmUsb3-ngff carrier, the printed circuit board in 3D

    Usb3-ngff carrier

    themainframe/5g-m2-usb3-interface-pcb

    KiCad EDA Project for my 5G M.2 (NGFF) USB3 Interface board

    62 parts80MIT
  • 4 layers32 × 45 mmD4 small pcb, the printed circuit board in 3D

    D4 small pcb

    unsurv/unsurv-offline

    Offline portable GNSS device based on the ESP32

    62 parts72
  • 4 layers30.5 × 68.6 mm32bit, the printed circuit board in 3D

    32bit

    bread-modular/bread-modular

    Modular Synths for Everyone

    62 parts67MIT

Questions

How big is the Open Field Logger Lab PCB?

It measures 107.9 × 69.9 mm and has 4 copper layers, 2.45 mm thick.

What parts does the Open Field Logger Lab use?

62 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Open Field Logger Lab KiCad files?

From the LeemanGeophysicalLLC/Open_Field_Logger_Lab repository on GitHub, at the commit this page was made from: the board is hardware/KiCAD_Project/Open_Field_Logger_Lab.kicad_pcb and its schematic hardware/KiCAD_Project/Open_Field_Logger_Lab.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Open Field Logger Lab design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).