
Portapack h1
portapack-mayhem/mayhem-firmware
The firmware for the HackRF+PortaPack H1/H2/H4/H4M

Rotating PCB for the NSSL EFM
Digital PCB is an open-source printed circuit board by LeemanGeophysicalLLC, from the LeemanGeophysicalLLC/NSSL_EFM_Rotating_PCB repository on GitHub, published under the MIT licence. It is a 4-layer board of 75 × 84.8 mm with 111 parts on 117 nets, routed with 1,063 tracks and 135 vias.
Its parts include 39 resistors, 28 capacitors, 12 connectors, 11 ICs and 4 diodes.
The rotating electronics collect the majority of the scientific data during flight.
This includes the relative orientation of the sensor spheres, electrical charge flow
between the spheres, GPS position, temperature, pressure, and humidity. All data are
logged to an onboard microSD card for post-flight analysis. These measurements are
essential for understanding the electric field structure and environmental conditions
surrounding the instrument throughout its ascent and descent.
See the main instrument repo for documentation and the rest of the instrument.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | 1-0000007 | capacitors_0603:1-0000007 | C1, C2, C3, C4, C11, C13, C14, C15, C16, C17, C18, C20, C21, C22, C25, C26 |
| 12 | 1-0000006 | resistors_0603:1-0000006 | R1, R2, R3, R4, R5, R13, R14, R17, R18, R22, R34, R36 |
| 11 | 1-0000010 | resistors_0603:1-0000010 | R6, R7, R8, R11, R12, R15, R16, R19, R20, R24, R38 |
| 4 | 1-0000018 | capacitors_0603:1-0000018 | C5, C9, C10, C24 |
| 4 | 1-0000174 | resistors_0603:1-0000174 | R9, R10, R21, R33 |
| 4 | 1-0001551 | resistors_0603:1-0001551 | R25, R26, R28, R30 |
| 4 | 1-0001553 | resistors_0603:1-0001553 | R27, R29, R31, R32 |
| 4 | Fiducial_1mm_2mm | mechanical:Fiducial_1mm_Mask2mm | FID1, FID2, FID3, FID4 |
| 3 | 1-0000075 | capacitors_0805:1-0000075 | C8, C19, C23 |
| 3 | NP_Conn_01x02_Relief | np_connectors:SolderWire_1x02_Relief | J1, J10, J11 |
| 2 | 1-0000008 | resistors_0603:1-0000008 | R35, R37 |
| 2 | 1-0000136 | capacitors_1206:1-0000136 | C6, C7 |
| 2 | 1-0000264 | amplifiers:1-0000264 | U7, U8 |
| 2 | 1-0001156 | connectors:1-0001156 | J3, J5 |
| 2 | Imperial6 | mechanical:MountingHole_imperial6 | H1, H2 |
| 2 | NP_Conn_01x04 | np_connectors:PinHeader_1x04_P2.54mm_Vertical | J7, J9 |
| 1 | 1-0000014 | capacitors_0603:1-0000014 | C28 |
| 1 | 1-0000050 | connectors:1-0000050 | J12 |
| 1 | 1-0000068 | resistors_0603:1-0000068 | R23 |
| 1 | 1-0000207 | microcontrollers:1-0000207 | U1 |
| 1 | 1-0000246 | batteries:1-0000246 | BT1 |
| 1 | 1-0000269 | fuses:1-0000269 | F1 |
| 1 | 1-0000458 | capacitors_0603:1-0000458 | C27 |
| 1 | 1-0000459 | inductors_0603:1-0000459 | L2 |
| 1 | 1-0000461 | connectors:1-0000461 | AE1 |
| 1 | 1-0000464 | others:1-0000464 | U11 |
| 1 | 1-0000465 | dc_dc_converters:1-0000465 | U2 |
| 1 | 1-0000576 | switches:1-0000576 | U3 |
| 1 | 1-0000599 | leds_0805:1-0000599 | D3 |
| 1 | 1-0000601 | leds_0805:1-0000601 | D4 |
| 1 | 1-0000678 | resistors_0603:1-0000678 | R39 |
| 1 | 1-0000721 | crystals_resonators:1-0000721 | Y1 |
| 1 | 1-0000727 | dc_dc_converters:1-0000727 | PS1 |
| 1 | 1-0000785 | others:1-0000785 | U10 |
| 1 | 1-0000926 | capacitors_0603:1-0000926 | C12 |
| 1 | 1-0000931 | inductors:1-0000931 | L1 |
| 1 | 1-0001205 | connectors:1-0001205 | J4 |
| 1 | 1-0001471 | sensors:1-0001471 | U6 |
| 1 | 1-0001530 | adcs:1-0001530 | U4 |
| 1 | 1-0001535 | sensors:1-0001535 | U9 |
| 1 | 1-0001537 | diodes:1-0001537 | D2 |
| 1 | 1-0001542 | crystals_resonators:1-0001542 | U5 |
| 1 | 1-0001670 | mosfets:1-0001670 | Q1 |
| 1 | 1-0001672 | diodes:1-0001672 | D1 |
| 1 | Board to Board | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J2 |
| 1 | LOGO | pcb_graphics:PCB Logo Standard | G*** |
| 1 | NP_Conn_01x02_Relief | np_connectors:PinHeader_1x02_P2.54mm_Vertical | J8 |
| 1 | NP_Conn_01x06 | np_connectors:PinHeader_1x06_P2.54mm_Vertical | J6 |
| 1 | QWIIC | pcb_graphics:5mm qwiic logo | G*** |
| 1 | barepcb | misc:barepcb | PCB1 |

portapack-mayhem/mayhem-firmware
The firmware for the HackRF+PortaPack H1/H2/H4/H4M

Neumi/ethersweep
Open Source, easy to use Ethernet connected stepper motor controller. Built in FreeCAD, KiCAD and Arduino.


azonenberg/starshipraider
Open hardware test equipment

BerkeleyHCI/PolymorphicBlocks
A Python-based hardware description language for PCBs for higher-level (block-diagram / system-architecture level) PCB design through libraries of directly reusable subcircuit generators.

intechstudio/knot
Knot is the bridge between old-school MIDI gear like synthesizers, groove boxes, guitar pedals and neat USB MIDI devices.

martinribelotta/h730duino
STM32H7 Arduino form factor and software compatible board

It measures 75 × 84.8 mm and has 4 copper layers, 2.45 mm thick.
111 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the LeemanGeophysicalLLC/NSSL_EFM_Rotating_PCB repository on GitHub, at the commit this page was made from: the board is KiCAD_Project/Digital_PCB.kicad_pcb and its schematic KiCAD_Project/ADC.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).