
Hackholidays
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

Orientation paddle PCB for NSSL EFM
Orientation Paddle is an open-source printed circuit board by LeemanGeophysicalLLC, from the LeemanGeophysicalLLC/NSSL_EFM_Orientation_PCB repository on GitHub, published under the MIT licence. It is a 2-layer board of 158.7 × 47 mm with 72 parts on 75 nets, routed with 636 tracks and 130 vias.
Its parts include 21 resistors, 16 capacitors, 9 connectors, 5 diodes and 4 ICs.
In the paddle opposite the motor driver, an orientation sensor based on a simple IMU
provides rough data on the instrument’s orientation over time. This allows analysis
of pendulum motion and other movements of the full instrument package. The system is
designed for easy sensor replacement, and all orientation data are logged to a
microSD card.
See the main instrument repo for documentation and the rest of the instrument.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 1-0000007 | capacitors_0603:1-0000007 | C3, C4, C5, C6, C7, C8, C9, C12, C13, C14, C15, C16 |
| 7 | 1-0000010 | resistors_0603:1-0000010 | R3, R4, R5, R6, R7, R10, R13 |
| 5 | 1-0000006 | resistors_0603:1-0000006 | R8, R11, R16, R18, R19 |
| 5 | 1-0000174 | resistors_0603:1-0000174 | R1, R9, R12, R20, R21 |
| 4 | Imperial6 | mechanical:MountingHole_imperial6 | H1, H2, H3, H4 |
| 3 | 1-0000008 | resistors_0603:1-0000008 | R14, R15, R17 |
| 2 | 1-0000136 | capacitors_1206:1-0000136 | C1, C2 |
| 2 | 1-0000601 | leds_0805:1-0000601 | D4, D5 |
| 2 | 1-0001156 | connectors:1-0001156 | J2, J3 |
| 2 | Fiducial_1mm_2mm | mechanical:Fiducial_1mm_Mask2mm | FID1, FID2 |
| 2 | NP_Conn_01x02_Relief | np_connectors:SolderWire_1x02_Relief | J4, J5 |
| 2 | SolderJumper_3_Open | Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP2 |
| 1 | 1-0000009 | resistors_0603:1-0000009 | R2 |
| 1 | 1-0000018 | capacitors_0603:1-0000018 | C11 |
| 1 | 1-0000050 | connectors:1-0000050 | J8 |
| 1 | 1-0000075 | capacitors_0805:1-0000075 | C10 |
| 1 | 1-0000127 | connectors:1-0000127 | J9 |
| 1 | 1-0000207 | microcontrollers:1-0000207 | U2 |
| 1 | 1-0000246 | batteries:1-0000246 | BT1 |
| 1 | 1-0000446 | others:1-0000446 | U4 |
| 1 | 1-0000599 | leds_0805:1-0000599 | D3 |
| 1 | 1-0000721 | crystals_resonators:1-0000721 | Y1 |
| 1 | 1-0000727 | dc_dc_converters:1-0000727 | PS1 |
| 1 | 1-0000785 | others:1-0000785 | U3 |
| 1 | 1-0000931 | inductors:1-0000931 | L1 |
| 1 | 1-0001205 | connectors:1-0001205 | J1 |
| 1 | 1-0001471 | sensors:1-0001471 | U1 |
| 1 | 1-0001517 | fuses:1-0001517 | F1 |
| 1 | 1-0001537 | diodes:1-0001537 | D2 |
| 1 | 1-0001670 | mosfets:1-0001670 | Q1 |
| 1 | 1-0001672 | diodes:1-0001672 | D1 |
| 1 | LOGO | pcb_graphics:PCB Logo Standard | G*** |
| 1 | NP_Conn_01x02 | np_connectors:PinHeader_1x02_P2.54mm_Vertical | J7 |
| 1 | NP_Conn_01x04 | np_connectors:PinHeader_1x04_P2.54mm_Vertical | J6 |
| 1 | QWIIC | pcb_graphics:5mm qwiic logo | G*** |
| 1 | barepcb | misc:barepcb | PCB1 |

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

BlueSCSI/BlueSCSI-v2
BlueSCSI v2/Ultra - an open source, open hardware, SCSI emulator using the Pi Pico PR2040 and Pico 2 RP2350


skiselev/micro_8088
Micro 8088 - IBM XT Compatible Processor Board based on Faraday FE2010 chipset



jes/scamp-cpu
A homebrew 16-bit CPU with a homebrew Unix-like-ish operating system.

Ardumower/ardumower
Develop an open source robotic lawn mower (HW+SW reference platform)
It measures 158.7 × 47 mm and has 2 copper layers, 2.45 mm thick.
72 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the LeemanGeophysicalLLC/NSSL_EFM_Orientation_PCB repository on GitHub, at the commit this page was made from: the board is KiCAD_Project/Orientation_Paddle.kicad_pcb and its schematic KiCAD_Project/Communications.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).