Skip to the content
2 layers127 × 76.2 mmInstrumentation amplifier, the printed circuit board in 3D

Instrumentation amplifier learning/demo PCB.

Size
127 × 76.2 mm
Copper layers
2
Thickness
0.04 mm
Parts
33
Nets
20
Pads
78
Tracks, vias
81, 7
Pours
7
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
16 Apr 2021
Updated
11 May 2021

Overview

Instrumentation amplifier is an open-source printed circuit board by LeemanGeophysicalLLC, from the LeemanGeophysicalLLC/Instrumentation_Amplifier_Demo_PCB repository on GitHub, published under the MIT licence. It is a 2-layer board of 127 × 76.2 mm with 33 parts on 20 nets, routed with 81 tracks and 7 vias.

Its parts include 10 resistors, 6 connectors, 4 capacitors, 2 ICs and 1 diode. It belongs with the audio and music boards of this library.

README

README.md

Instrumentation_Amplifier_Demo_PCB

Instrumentation amplifier learning/demo PCB.

Parts

33
QtyValueFootprintReferences
4MountingHolemechanical:MountingHole_3.2mm_M3_ISO7380H1, H2, H3, H4
21-0000007capacitors_0603:1-0000007C2, C3
21-0000010resistors_0603:1-0000010R2, R5
21-0000011resistors_0603:1-0000011R3, R4
21-0000018capacitors_0603:1-0000018C1, C4
21-0000120connectors:1-0000120J1, J4
2Fiducialmechanical:Fiducial_1mm_Mask2mmFID1, FID2
2JumperConnector_PinHeader_2.54mm:PinHeader_2x02_P2.54mm_VerticalJ2, J3
11-0000001connectors:1-0000001CON1
11-0000006resistors_0603:1-0000006R6
11-0000008resistors_0603:1-0000008R1
11-0000112resistors_0603:1-0000112R10
11-0000177resistors_0603:1-0000177R8
11-0000179resistors_0603:1-0000179R9
11-0000465dc_dc_converters:1-0000465U2
11-0000598leds_0805:1-0000598D1
11-0000801amplifiers:1-0000801U1
11-0000851resistors_0603:1-0000851R7
11-0000852switches:1-0000852SW1
1LOGOlib_fp:schematicG***
1LOGOpcb_graphics:mark135G***
1NP_Conn_01x04np_connectors:PinHeader_1x04_P2.54mm_VerticalJ5
1barepcbmisc:barepcbPCB1

Similar boards

  • 2 layers65 × 30 mmRgb to hdmi, the printed circuit board in 3D

    Rgb to hdmi

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    33 parts1kGPL-3.0
  • 2 layers127 × 96 mmAmiga gfxcard, the printed circuit board in 3D

    Amiga gfxcard

    mntmn/amiga2000-gfxcard

    MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog

    33 parts1k
  • 2 layers92.7 × 58.4 mmHacky holidays, the printed circuit board in 3D

    Hacky holidays

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    33 parts915
  • 2 layers240 × 120 mmQuiver PDB 01, the printed circuit board in 3D

    Quiver PDB 01

    Arrow-air/project-quiver

    Project Quiver documentation, designs, and project artifacts.

    33 parts617CERN-OHL-S-2.0
  • 2 layers75 × 26 mmDIY detector, the printed circuit board in 3D

    DIY detector

    ozel/DIY_particle_detector

    A mobile low-cost spectrometer for measuring radioactivity and the energy of ionising radiation like alpha particles and electrons

    33 parts558BSD-2-Clause
  • 2 layers100 × 50 mmPixelix, the printed circuit board in 3D

    Pixelix

    BlueAndi/Pixelix

    Full RGB LED matrix, based on an ESP32 and WS2812B LEDs or emulated LEDs on TFT.

    33 parts447MIT
  • 2 layers65 × 30 mmCanHat, the printed circuit board in 3D

    CanHat

    bondus/KlipperToolboard

    A 3D printer tool head controller board

    33 parts373GPL-3.0

Questions

How big is the Instrumentation amplifier PCB?

It measures 127 × 76.2 mm and has 2 copper layers, 0.04 mm thick.

What parts does the Instrumentation amplifier use?

33 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Instrumentation amplifier KiCad files?

From the LeemanGeophysicalLLC/Instrumentation_Amplifier_Demo_PCB repository on GitHub, at the commit this page was made from: the board is KiCAD_Project/instrumentation_amplifier/instrumentation_amplifier.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Instrumentation amplifier design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).