
Type d
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

LED Blinky Soldering Kits
Blinky kit pcb is an open-source printed circuit board by LeemanGeophysicalLLC, from the LeemanGeophysicalLLC/Blinky_Kits repository on GitHub, published under the MIT licence. It is a 2-layer board of 38.1 × 38.1 mm with 14 parts on 8 nets, routed with 68 tracks and 6 vias.
Its parts include 4 resistors, 2 capacitors, 2 diodes, 2 transistors and 1 connector.
LED Blinky Soldering Kits
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 1-0000036 | transistors:1-0000036 | Q1, Q2 |
| 2 | 1-0000548 | resistors_0805:1-0000548 | R2, R3 |
| 2 | 1-0000551 | resistors_0805:1-0000551 | R1, R4 |
| 2 | 1-0000568 | leds_th:1-0000568 | D1, D2 |
| 2 | 1-0000853 | capacitors_th:1-0000853 | C1, C2 |
| 1 | 1-0000494 | batteries:1-0000494 | BT1 |
| 1 | 2 Pos | Connector_Wire:SolderWire-0.5sqmm_1x02_P4.6mm_D0.9mm_OD2.1mm_Relief | J1 |
| 1 | LOGO | pcb_graphics:mark135 | G*** |
| 1 | barepcb | misc:barepcb | PCB1 |

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards


hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!



Twotoz/C5VRX
Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS


It measures 38.1 × 38.1 mm and has 2 copper layers, 1.6 mm thick.
14 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the LeemanGeophysicalLLC/Blinky_Kits repository on GitHub, at the commit this page was made from: the board is TH_SMD_Kit/KiCAD_Project/blinky_kit_pcb/blinky_kit_pcb.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).