Skip to the content
2 layers18.9 × 15.4 mmDrh flash flex, the printed circuit board in 3D

Relocation flex for the DRHs SPI flash

Size
18.9 × 15.4 mm
Copper layers
2
Thickness
1.6 mm
Parts
9
Nets
6
Pads
16
Tracks, vias
24, 12
Pours
10
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
14 Oct 2024
Updated
30 Oct 2024

Overview

Drh flash flex is an open-source printed circuit board by Lazr1026, from the Lazr1026/drh-flash-flex repository on GitHub. It is a 2-layer board of 18.9 × 15.4 mm with 9 parts on 6 nets, routed with 24 tracks and 12 vias.

Its parts include 4 connectors and 1 IC.

README

README.md

DRH Flash Flex

I suck at naming things, the flex relocates the flash for the DRH to the top of the board.

Why? The flash sticks up alot, so much so that securing the 5GHz module becomes a challenge as it is (usually) relocated to sit in that area.

The flex should be compatible with all board revisions, but the via for 3v3 was designed with the WUP-50 in mind. In theory it should reach the small 3v3 plane for the DRH on the previous boards, but just in case it doesnt I added a pad and a line to follow to snip off that area.

Shorts between 3v3 and GND should not be a worry, as there is no copper on the other side of the flex in that area.

Tested and working!

Credits

  • YveltalGriffin: Suggestion of rotating the IC to be vertical, which then really cleaned up the routing.
  • BitBuilt: Being pretty fucking cool.

Parts

9
QtyValueFootprintReferences
4Conn_01x01wiiu:wii-single-via-0.5mmJ32, J32, J32, J32
23mm_Mounting_Holewiiu:NPTH_3mm_IDH1, H1
2TestPoint_Pad_D1.0mmTestPoint:TestPoint_Pad_D1.0mm3v3, CS
1~Package_SO:SOP-8_5.28x5.23mm_P1.27mmU1

Similar boards

  • 2 layers103 × 30.5 mmTS Back Endcap, the printed circuit board in 3D

    TS Back Endcap

    EEVengers/ThunderScope

    ThunderScope GitHub Repo

    9 parts1.3kMIT
  • 2 layers31.8 × 47.6 mmNGC 38 connector, the printed circuit board in 3D

    NGC 38 connector

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    9 parts1.2k
  • 2 layers24 × 27.3 mmExpansion Card Retrofit, the printed circuit board in 3D

    Expansion Card Retrofit

    FrameworkComputer/ExpansionCards

    Reference designs and documentation to create Expansion Cards for the Framework Laptop

    9 parts1.1kCC-BY-4.0
  • 2 layers15.6 × 17.3 mmSKR Mini TFT Thermistor Board, the printed circuit board in 3D

    SKR Mini TFT Thermistor Board

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    9 parts1.1kGPL-3.0
  • 2 layers39.1 × 49.5 mmLearnoliver, the printed circuit board in 3D

    Learnoliver

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    9 parts915
  • 2 layers17.4 × 16.9 mmToolhead, the printed circuit board in 3D

    Toolhead

    tanaes/whopping_Voron_mods

    9 parts787GPL-3.0
  • 2 layers9.8 × 108 mmExpander, the printed circuit board in 3D

    Expander

    wntrblm/Castor_and_Pollux

    A Juno-inspired dual oscillator

    9 parts587
  • 2 layersKeyboard after, the printed circuit board in 3D

    Keyboard after

    adamws/kicad-kbplacer

    KiCad plugin for automatic keyboard's key placement and routing

    9 parts547GPL-3.0

Questions

How big is the Drh flash flex PCB?

It measures 18.9 × 15.4 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Drh flash flex use?

9 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Drh flash flex KiCad files?

From the Lazr1026/drh-flash-flex repository on GitHub, at the commit this page was made from: the board is drh-flash-flex.kicad_pcb and its schematic drh-flash-flex.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Drh flash flex design in my own project?

Its repository states no licence, so its author keeps all rights: ask Lazr1026 before reusing the design.