Skip to the content
2 layers56.2 × 71.1 mmPTPE PCB, the printed circuit board in 3D

PCB for the Pico ToyPad Emulator

Size
56.2 × 71.1 mm
Copper layers
2
Thickness
1.6 mm
Parts
11
Nets
42
Pads
75
Tracks, vias
65, 70
Pours
36
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
30 Aug 2024
Updated
19 Sep 2024

Overview

PTPE PCB is an open-source printed circuit board by Lazr1026, from the Lazr1026/PTPE_PCB repository on GitHub. It is a 2-layer board of 56.2 × 71.1 mm with 11 parts on 42 nets, routed with 65 tracks and 70 vias.

README

README.md

PTPE_PCB

PCB for the Pico ToyPad Emulator

BOM

  • Pico (duh).
  • This screen. You can probably find something similar somewhere else for cheaper, but thats what I bought.
  • These tactile switches (the buttons). You can find cheaper probably on AliExpress, just search for "1825910-6". Make sure you get 5!

Ordering Instructions

  • Download and upload the .zip from the releases to JLCPCB / PCBWAY / OSHPark / etc.
  • PCB does not need any specific option set, recommended to leave at defaults. You can do ENIG if you want, but that will jump the price way up.

Assembly instructions

NOTE: Buttons and Screen can be done in any order you want, however the Pico MUST be done first.

  • Start with soldering on the Pico. The screen will get in the way and the buttons might.
  • Solder the buttons. (Or you can skip this and just use tweezers)
  • Solder wires to the SD card pads (I recommend magnet wire for this), and then solder on the screen.
  • Solder the SD card wires to the SD card pins on the screen.

Parts

11
QtyValueFootprintReferences
51825910-6ptpe_pcb:SW_1825910-6-4Left/Down, Misc1, Misc2, Right/Up, Select
1TestPoint_Pad_D1.5mmTestPoint:TestPoint_Pad_D1.5mmCS
1U1ptpe_pcb:RPi_Pico_SMDPico

The 7 most common of 11 parts.

Similar boards

  • 2 layers60 × 30 mmController, the printed circuit board in 3D

    Controller

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    11 parts3kApache-2.0
  • 2 layers103 × 30.5 mmTS Front Endcap, the printed circuit board in 3D

    TS Front Endcap

    EEVengers/ThunderScope

    ThunderScope GitHub Repo

    11 parts1.3kMIT
  • 2 layers26 × 30 mmExpansion Card, the printed circuit board in 3D

    Expansion Card

    FrameworkComputer/ExpansionCards

    Reference designs and documentation to create Expansion Cards for the Framework Laptop

    11 parts1.1kCC-BY-4.0
  • 2 layers53.9 × 23.2 mmBuffer, the printed circuit board in 3D

    Buffer

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    11 parts1kGPL-3.0
  • 2 layers10 × 20 mm2 connector Sensor Board, the printed circuit board in 3D

    2 connector Sensor Board

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    11 parts915
  • 2 layersFet module, the printed circuit board in 3D

    Fet module

    ByteWelder/Decktility

    A handheld PC

    11 parts855CC-BY-SA-4.0
  • 2 layers47 × 33 mmSevensegment led display module, the printed circuit board in 3D

    Sevensegment led display module

    tardate/LittleArduinoProjects

    a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!

    11 parts803MIT
  • 2 layers42.5 × 36.8 mmDevboard, the printed circuit board in 3D

    Devboard

    basilfx/TRADFRI-Hacking

    Hacking IKEA TRÅDFRI products, such as light bulbs, window blinds and other accessories.

    11 parts743CC-BY-4.0

Questions

How big is the PTPE PCB PCB?

It measures 56.2 × 71.1 mm and has 2 copper layers, 1.6 mm thick.

What parts does the PTPE PCB use?

11 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the PTPE PCB KiCad files?

From the Lazr1026/PTPE_PCB repository on GitHub, at the commit this page was made from: the board is ptpe_pcb.kicad_pcb and its schematic ptpe_pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the PTPE PCB design in my own project?

Its repository states no licence, so its author keeps all rights: ask Lazr1026 before reusing the design.