

PCB PicoKeyBoard
- Size
- 26.3 × 49.9 mm
- Copper layers
- 8
- Thickness
- 10.87 mm
- Parts
- 9
- Nets
- 38
- Pads
- 77
- Tracks, vias
- 159, 29
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 27 Feb 2023
- Updated
- 4 Mar 2023
Overview
PCB PicoKeyBoard is an open-source printed circuit board by Lathe-Mariel, from the Lathe-Mariel/PCB_PicoKeyBoard repository on GitHub, published under the MIT licence. It is an 8-layer board of 26.3 × 49.9 mm with 9 parts on 38 nets, routed with 159 tracks and 29 vias.
It belongs with the RP2040 boards of this library.
README
README.mdPCB_PicoKeyBoard
Parts
9| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | TestPoint | TestPoint:TestPoint_Pad_1.5x1.5mm | TP1, TP2, TP3, TP4, TP5, TP6, TP7 |
| 1 | 502790-3091 | samactech:FPC30_p0.5 | J2 |
| 1 | PICO | samactech:PICO | J1 |
Similar boards
- 8 layers

- 8 layers

Buffer
wickerwaka/nuBoard
Verified 2026-09-24 with KiCad 10.0.6. Open nuBoard.kicadpcb in this directory to inspect the result. This is a PCB-only candidate, separate from the main-board schematic and PCB.
7 parts1 - 8 layers76.2 × 50.8 mm

- 8 layers95 × 52 mm

Device
jayis1/hacker-devices
Full-cycle hardware designs for security research devices — each device is a subfolder with its own README, schematics, PCB layout, and software stack
11 parts2 - 8 layers150 × 160 mm

U21
Infinionist/krt-timiq-trial
KiCadRoutingTools placement trial on the CERN TimIQ RF board: raw working material
11 parts - 8 layers50 × 50 mm

- 8 layers150.9 × 55.8 mm

DRXDaughterboard
lwa-project/zcu102_daughter_board
Daughter board/adapter to connect two digitizer boards to the ZCU102 board
12 parts - 8 layers167.5 × 31.5 mm

Questions
How big is the PCB PicoKeyBoard PCB?
It measures 26.3 × 49.9 mm and has 8 copper layers, 10.87 mm thick.
What parts does the PCB PicoKeyBoard use?
9 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PCB PicoKeyBoard KiCad files?
From the Lathe-Mariel/PCB_PicoKeyBoard repository on GitHub, at the commit this page was made from: the board is pcb_picokeyboard.kicad_pcb and its schematic pcb_picokeyboard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the PCB PicoKeyBoard design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).