Skip to the content
2 layers34 × 39.5 mmOpenESPmodule, the printed circuit board in 3D

An open sourced board dedicated for DIY project.

Size
34 × 39.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
29
Nets
38
Pads
176
Tracks, vias
207, 11
Pours
2
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
7 Apr 2025
Updated
28 Nov 2025

Overview

OpenESPmodule is an open-source printed circuit board by Lasertie, from the Lasertie/Open-ESP-board repository on GitHub. It is a 2-layer board of 34 × 39.5 mm with 29 parts on 38 nets, routed with 207 tracks and 11 vias.

It is built around the ESP32-C3-WROOM-02-H4 and SPX3819M5-L-3-3. Its parts include 10 capacitors, 7 resistors, 5 ICs, 2 connectors and 2 switches. It belongs with the ESP32 and RISC-V boards of this library.

Main components

2

README

README.md

Open ESP Board

[Le ReadMe est en construction]

Pourquoi ce projet ?

Le but de cette carte faire un carte ESP32 exclusive pour la domotique. La carte est pensée pou etre "All-proff"

Histoirex

L' Open ESP Board est né de deux besoins conjoints : Une carte de domotique et une carte multifonction. Mon besoin etait d'avoir une carte domotique current proff, j'avais besoin de pouvoir recevoir un signal éléctique instable et de détecter sa presence. Mais il y avait un autre projet pour Intelli Lab. J'ai donc réunit ces deux besoins pour faire une carte universelle. Malheuresement je n'etait pas expert dans le domaine, mais il me fallait une puce centrale. Donc etant donné la communauté autour de l'ESP32, je me suis tourné vers cette puce.

La philosophie

Licence

Ce projet est sous la LOC. Voir loc.zyglonk.fr pour plus de détails.

Parts

29
QtyValueFootprintReferences
6100nCapacitor_SMD:C_0201_0603MetricC1, C2, C5, C7, C8, C9
45k1Resistor_SMD:R_0201_0603MetricR1, R2, R4, R5
310uCapacitor_SMD:C_0201_0603MetricC3, C4, C6
2100kResistor_SMD:R_0201_0603MetricR6, R7
2SW_PushButton_Switch_THT:SW_DIP_SPSTx01_Slide_9.78x4.72mm_W7.62mm_P2.54mmSW1, SW2
11kResistor_SMD:R_0201_0603MetricR3
12.2uInductor_SMD:L_0201_0603MetricL1
14.7uCapacitor_SMD:C_0201_0603MetricC10
14N28Package_DIP:DIP-6_W7.62mmU4
1Battery_CellBattery:BatteryHolder_Keystone_1060_1x2032BT1
1ESP32-C3-WROOM-02RF_Module:ESP32-C3-WROOM-02U1
1IR26-21C_L110_TR8LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolderD1
1MCP9700Ax-HLTPackage_TO_SOT_SMD:SOT-353_SC-70-5U3
1PINHD_1x15_FemaleConnector_PinSocket_2.54mm:PinSocket_1x15_P2.54mm_VerticalJ1
1SPX3819M5-L-3-3Package_TO_SOT_SMD:SOT-23-5U2
1ST1S12XXPackage_TO_SOT_SMD:TSOT-23-5U6
1USB_C_Receptacle_USB2.0_16PConnector_USB:USB_C_Receptacle_GCT_USB4085J3

Similar boards

  • 2 layers76 × 22 mmMatenode, the printed circuit board in 3D

    Matenode

    cr1tbit/matenode

    Power your blinking LEDs from a battery! Or just plain USB-C.

    107 parts
  • 2 layers136.1 × 135.4 mmMinicopter, the printed circuit board in 3D

    Minicopter

    darshg321/Minicopter

    Compact and precise ESP-32 based drone capable of autonomous pathing, built from scratch

    57 parts
  • 2 layers216 × 89 mmPcb ledmatrix, the printed circuit board in 3D

    Pcb ledmatrix

    stebit/pcb-ledmatrix

    302 parts
  • 2 layers30 × 60 mmSplitFlapDriverATtiny1616V4, the printed circuit board in 3D

    SplitFlapDriverATtiny1616V4

    adamgmakes/SplitFlapDisplay

    A modular, 3D-printed split-flap display controllable over RS485 from a Raspberry Pi. Each module holds 64 characters and modules can be chained together to build a display of any width.

    25 parts190
  • 4 layers35.6 × 17.8 mmLofive, the printed circuit board in 3D

    Lofive

    mwelling/lofive

    RISC-V microcontroller board based on SiFive FE310.

    35 parts161
  • 2 layers25.6 × 23 mmBreakout, the printed circuit board in 3D

    Breakout

    skorokithakis/tiny-ESP8266-breakout

    A very small and basic ESP8266 breakout board

    12 parts115BSD-2-Clause
  • 4 layers15.2 × 19 mmOpenlager, the printed circuit board in 3D

    Openlager

    d-ronin/openlager

    STM32F4 based logging dongle for HIGH RATE logging

    30 parts111
  • 2 layers31.4 × 20.6 mmWindow sensor V5, the printed circuit board in 3D

    Window sensor V5

    gadjet/Window-Door-sensor-Version-5

    Version 5 of the Window/Door sensor project this time with ultra low current consumption

    32 parts70GPL-2.0

Questions

How big is the OpenESPmodule PCB?

It measures 34 × 39.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the OpenESPmodule use?

29 parts, built around the ESP32-C3-WROOM-02-H4 and SPX3819M5-L-3-3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the OpenESPmodule KiCad files?

From the Lasertie/Open-ESP-board repository on GitHub, at the commit this page was made from: the board is PCB/OpenESPmodule.kicad_pcb and its schematic PCB/OpenESPmodule.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the OpenESPmodule design in my own project?

Its repository states no licence, so its author keeps all rights: ask Lasertie before reusing the design.