Skip to the content
2 layers19.3 × 47.2 mmArduino nRF24-2.4GHz Channel Sweeper, the printed circuit board in 3D

Arduino nRF24-2.4GHz Channel Sweeper

LaMassa07/Arduino-nRF24-2.4GHz-Channel-Sweeper1

Arduino project using an nRF24L01 to generate a constant carrier and perform a 2.4 GHz channel sweep for RF testing and experimentation purposes.

Size
19.3 × 47.2 mm
Copper layers
2
Thickness
1.6 mm
Parts
6
Nets
31
Pads
52
Tracks, vias
11, 1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
31 Dec 2025
Updated
7 Sep 2026

Overview

Arduino nRF24-2.4GHz Channel Sweeper is an open-source printed circuit board by LaMassa07, from the LaMassa07/Arduino-nRF24-2.4GHz-Channel-Sweeper repository on GitHub. It is a 2-layer board of 19.3 × 47.2 mm with 6 parts on 31 nets, routed with 11 tracks and 1 via.

It is built around the P1. Its parts include 1 capacitor, 1 resistor, 1 IC and 1 inductor.

Main components

1

README

README.md

Arduino-nRF24-2.4GHz-Channel-Sweeper

Arduino project using an nRF24L01 to generate a constant carrier and perform a 2.4 GHz channel sweep for RF testing and experimentation purposes.


📌 Features

  • Generate a constant RF carrier using nRF24L01
  • Sweep across 2.4 GHz channels
  • Target BLE advertising and data channels
  • Button‑controlled transmission with LED status indicator
  • Configurable channel timing and power level

⚙️ Setup

  • First, be sure to have the Arduino IDE at the last version

Libraries

Go to Sketch → Include Library → Add .ZIP Library and install:

  • RF24 by TMRh20 from here

🛠️ Installing the code

Open the code.ino file with the IDE. Before uploading it, you can edit the button and led pins.

When you are ready, click Upload


🔌 Build the circuit

Materials:

  • ARDUINO board (I used ARDUINO Nano, but you can choose your ARDUINO, but be sure to use the right SPI pins)
  • 1 x buttons
  • 1 x 220Ω resistors
  • 1 x led
  • 1 x nRF24l01+PA+LNA rf module
  • 1 x 47uF capacitor

Schematic

image

🖥️ Use

⚠️ USE THIS ONLY IN A CONTROLLED ENVIRONMENT.
This project is intended purely for RF experimentation, learning, and demonstration purposes.
Do not use near critical devices, production Wi-Fi, or Bluetooth networks.




📄 License

This project is released under the MIT License.
See LICENSE for details.


🙌 Credits

Inspired by the work of @SecureTechware, so consider taking a look at his original project.

Find Me on: Github

Parts

6
QtyValueFootprintReferences
110uF0Planck_20250924:CP_Radial_D5.0mm_P2.00mmC2
12200Planck_20250924:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR1
1Arduino Nano0Planck_20250924:Arduino_Nano_WithMountingHolesA2
1LED0Planck_20250924:LED_D5.0mmL1
1NRF24RF_Module:nRF24L01_BreakoutU1
1P_10Planck_20250924:SW_PUSH_6mm_H9.5mmOK1

Similar boards

  • 2 layers43 × 39 mmAdpd1080 breakoutboard, the printed circuit board in 3D

    Adpd1080 breakoutboard

    lamikr/hrm_breakoutboards

    HRM related small pcb breakoutboards to help testing some components one by one.

    28 parts
  • 2 layers265.5 × 150 mmSCU rig control, the printed circuit board in 3D

    SCU rig control

    OisinS13/FC_IP_rig

    Code to control a FC rig based around a Powercell S2 24 cell PEMFC stack

    110 partsGPL-3.0
  • 2 layers18.5 × 11.1 mmSwitch, the printed circuit board in 3D

    Switch

    byrantech/laptop

    anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

    6 parts4.3kMIT
  • 2 layers14.6 × 33 mmBrain board SD Card 1, the printed circuit board in 3D

    Brain board SD Card 1

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    6 parts1.2k
  • 2 layers9 × 9 mmDpoint, the printed circuit board in 3D

    Dpoint

    Jcparkyn/dpoint

    Open-source digital stylus using camera tracking and inertial measurements

    6 parts1.1kMIT
  • 2 layers51.5 × 16.6 mmMicroswitchXY Endstop, the printed circuit board in 3D

    MicroswitchXY Endstop

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    6 parts1.1kGPL-3.0
  • 2 layers21.9 × 76.7 mmAmiga External, the printed circuit board in 3D

    Amiga External

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    6 parts1kGPL-3.0
  • 2 layers88.9 × 50.8 mmBusinesscard, the printed circuit board in 3D

    Businesscard

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    6 parts915

Questions

How big is the Arduino nRF24-2.4GHz Channel Sweeper PCB?

It measures 19.3 × 47.2 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Arduino nRF24-2.4GHz Channel Sweeper use?

6 parts, built around the P1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Arduino nRF24-2.4GHz Channel Sweeper KiCad files?

From the LaMassa07/Arduino-nRF24-2.4GHz-Channel-Sweeper repository on GitHub, at the commit this page was made from: the board is pcb/pcb.kicad_pcb and its schematic pcb/pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Arduino nRF24-2.4GHz Channel Sweeper design in my own project?

Its repository states no licence, so its author keeps all rights: ask LaMassa07 before reusing the design.