
Soilsense
fredriknk/ssense
Open hardware for a Zigbee nrf52833 soil moisture probe, It is designed for using M3 stainless steel rods as probes screwed into the headers H1,H2,H3.

a ch572 board with as least components as possible
CH572-LowBOM is an open-source printed circuit board by LRNATHD, from the LRNATHD/CH572-LowBOM repository on GitHub, published under the MIT licence. It is a 2-layer board of 14 × 12 mm with 17 parts on 25 nets, routed with 22 tracks and 0 vias.
It is built around the TL3365AF180QG and XRCGB32M000F2P01R0. Its parts include 4 capacitors, 3 resistors, 2 ICs, 2 diodes and 2 connectors.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 330 | Footprint:0603 | R4, R5 |
| 2 | C_0603 | Footprint:0603 | C1, C2 |
| 2 | PWRLED | Footprint:LED_1206 | D1, D2 |
| 2 | TL3365AF180QG | Footprint:button | S1, S2 |
| 1 | 0.1uF | Footprint:0603 | C7 |
| 1 | 1.5k | Footprint:0603 | R3 |
| 1 | 2.2uF | Footprint:0603 | C6 |
| 1 | 2.4ghz | Footprint:antenna | E2 |
| 1 | PinHeader_01x06_P2.54mm_Horizontal_SMD | Footprint:PinHeader_01x06_P2.54mm_Horizontal_SMD | J2 |
| 1 | TCR2EF33_LMCT | Footprint:voltage regulator | U2 |
| 1 | USB_A_PCB_Edge_receptacle | Footprint:USB_A_PCB_Edge_receptacle | J1 |
| 1 | XRCGB32M000F2P01R0 | Footprint:32mhz crystal | Y1 |
| 1 | ~ | Footprint:CH572D | U1 |

fredriknk/ssense
Open hardware for a Zigbee nrf52833 soil moisture probe, It is designed for using M3 stainless steel rods as probes screwed into the headers H1,H2,H3.

es-ude/elasticai.hardware
Schematics and Board design for ElasticNodeHardware

Daxxn/BenchyReloaded
New and improved Benchy, now with more doodads!

LRNATHD/CH572D-Board
example board using WCH's CH572 Bluetooth microcontroller

Deivid-Negoita/octobot
An eight-legged walking robot I built end to end: chassis CAD, a 24-servo ATmega32U4 controller board, the firmware, and a browser IK workbench you can drive it from.

williamjroche/Drone_Flight_Controller
This is a GPS-Denied Autonomous Drone that uses computer vision to fly with radio transmission override. Autonomy is a work in progress.

zeankundev/boards
A collection and an archive of KiCad projects I made. Contains projects from 2023 - 2024.

It measures 14 × 12 mm and has 2 copper layers, 1.6 mm thick.
17 parts, built around the TL3365AF180QG and XRCGB32M000F2P01R0. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the LRNATHD/CH572-LowBOM repository on GitHub, at the commit this page was made from: the board is CH572-LowBOM/CH572-LowBOM-backups/CH572-LowBOM-2025-10-08_232615/CH572-LowBOM.kicad_pcb and its schematic CH572-LowBOM/CH572-LowBOM-backups/CH572-LowBOM-2025-10-08_232615/CH572-LowBOM.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).