

F28377S
使用176管脚的TMS320F28377S为主控引出来12路PWM和所有的模拟输入端口
- Size
- 86.4 × 69.9 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 174
- Nets
- 214
- Pads
- 704
- Tracks, vias
- 2,075, 296
- Pours
- 16
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 23 Aug 2020
- Updated
- 23 Aug 2020
Overview
F28377S is an open-source printed circuit board by LE-TOM, from the LE-TOM/TMS320F28377S- repository on GitHub. It is a 4-layer board of 86.4 × 69.9 mm with 174 parts on 214 nets, routed with 2,075 tracks and 296 vias.
It is built around the TMS320F28377SPTPS, 74HC244D and SN65HVD230D, with the LM321 and REF196GP among its other parts. Its parts include 86 capacitors, 48 resistors, 10 ICs, 4 inductors and 1 crystal.
Main components
5TMS320F28377SPTPS
LQFP-176(24x24)-40℃~+125℃@(TJ) 1.14V~3.47V 12bit 12bit、16bit 1MB 200MHz 32 Bit 82KB 97 Built-in FLASH Others LQFP-176(24x24) Microcontrollers (MCU/MPU/SOC) ROHSTexas InstrumentsMicrocontrollers (MCU/MPU/SOC)74HC244D
SO-20-300mil-40℃~+125℃ 160uA 2 2V~6V 4 6mA 6mA 74HC 9ns@5V,15pF Tri-State Unidirectional SOIC-20-300mil Buffers, Drivers, Receivers, Transceivers ROHSNexperiaBuffers, Drivers, Receivers, TransceiversSN65HVD230D
SOIC-8-40℃~+85℃ 1 17mA 1Mbps 370uA 3V~3.6V CAN Transceiver Low-power mode、Wake-up function、ESD protection、Thermal shutdown protection、Bus fault protection、Hot-swap protection SOIC-8 CAN Transceivers ROHSTexas InstrumentsCAN TransceiversLM321
SOT-23-50℃~+70℃ 1 2mV 3nA 400V/ms 40mA 430uA 45nA 90dB SOT-23-5 Operational Amplifier ROHSPJSEMIOperational AmplifierREF196GP
PDIP-8-40℃~+85℃@(Ta) 25ppm/℃ 3.3V 30mA 45uA Fixed Series PDIP-8 Voltage ReferenceAnalog DevicesVoltage Reference
README
README.mdTMS320F28377S-
使用176管脚的TMS320F28377S为主控引出来12路PWM和所有的模拟输入端口
Parts
174| Qty | Value | Footprint | References |
|---|---|---|---|
| 42 | 0.1u | Capacitors_SMD:C_0603 | C1, C2, C11, C12, C15, C16, C17, C19, C20, C21, C24, C25, C26, C29, C30, C35 +26 |
| 21 | 100 | Resistors_SMD:R_0603 | R11, R19, R20, R21, R22, R23, R24, R25, R26, R27, R28, R29, R30, R31, R32, R33 +5 |
| 18 | 100p | Capacitors_SMD:C_0603 | C65, C66, C67, C68, C69, C70, C71, C72, C73, C74, C75, C76, C77, C78, C79, C80 +2 |
| 17 | 2u2 | Capacitors_SMD:C_0603 | C5, C6, C10, C13, C14, C18, C23, C27, C28, C33, C34, C39, C43, C47, C52, C61 +1 |
| 10 | 4k7 | Resistors_SMD:R_0603 | R4, R12, R15, R16, R17, R18, R37, R38, R39, R42 |
| 7 | 1k | Resistors_SMD:R_0603 | R7, R9, R44, R45, R46, R47, R48 |
| 5 | DG1 | LEDs:LED_0805 | DG1, DG2, DG3, DG4, DG5 |
| 4 | 200Ohm | Resistors_SMD:R_0805 | L1, L2, L3, L4 |
| 4 | 2k2 | Resistors_SMD:R_0603 | R3, R5, R6, R14 |
| 3 | 2.2u | Capacitors_SMD:C_0603 | C8, C22, C85 |
| 3 | 220u | Capacitors_SMD:CP_Elec_4x4.5 | C32, C48, C49 |
| 3 | 74HC244 | Housings_SSOP:SSOP-20_5.3x7.2mm_Pitch0.65mm | U7, U8, U9 |
| 2 | 25p | Capacitors_SMD:C_0603 | C3, C4 |
| 2 | 820 | Resistors_SMD:R_0603 | R1, R2 |
| 2 | ANALOG | Pin_Headers:Pin_Header_Straight_2x07_Pitch2.54mm | ANALOG1, ANALOG2 |
| 2 | LM321 | TO_SOT_Packages_SMD:SOT-23-5 | U5, U6 |
| 1 | 10Mhz | Crystals:Crystal_HC49-4H_Vertical | Y1 |
| 1 | 10k | Resistors_SMD:R_0603 | R13 |
| 1 | 120 | Resistors_SMD:R_0603 | R43 |
| 1 | 1M | Resistors_SMD:R_0603 | R8 |
| 1 | 220u | Capacitors_SMD:CP_Elec_6.3x4.5 | C31 |
| 1 | 300 | Resistors_SMD:R_0603 | R10 |
| 1 | AZ1117-1.2 | TO_SOT_Packages_SMD:SOT-223 | U4 |
| 1 | AZ1117-3.3 | TO_SOT_Packages_SMD:SOT-223 | U3 |
| 1 | BLED | LEDs:LED_0805 | 1V2L1 |
| 1 | BOOT | Buttons_Switches_SMD:SW_DIP_x3_W8.61mm_Slide_LowProfile | BOOT1 |
| 1 | CAN | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | CAN1 |
| 1 | DIGITAL | Pin_Headers:Pin_Header_Straight_2x03_Pitch2.54mm | DIGITAL1 |
| 1 | EPWM1-4 | Pin_Headers:Pin_Header_Straight_2x05_Pitch2.54mm | EPWM1-4 |
| 1 | EPWM5-8 | Pin_Headers:Pin_Header_Straight_2x05_Pitch2.54mm | EPWM5-8 |
| 1 | EPWM9-12 | Pin_Headers:Pin_Header_Straight_2x05_Pitch2.54mm | EPWM9-12 |
| 1 | GLED | LEDs:LED_0805 | 3V3L1 |
| 1 | GPIO_Digital | Pin_Headers:Pin_Header_Straight_2x07_Pitch2.54mm | GPIO_Digital1 |
| 1 | LOGO | LOGO:logo | G*** |
| 1 | LOGO | LOGO:TI | G*** |
| 1 | PROGRAME | Pin_Headers:Pin_Header_Straight_2x07_Pitch2.54mm | JTAG1 |
| 1 | PWR | Pin_Headers:Pin_Header_Straight_2x04_Pitch2.54mm | PWR1 |
| 1 | REF196 | SMD_Packages:SOIC-8-N | U2 |
| 1 | RLED | LEDs:LED_0805 | 5VL1 |
| 1 | SN65HVD230 | SMD_Packages:SOIC-8-N | U10 |
| 1 | SW_Push | Buttons_Switches_SMD:Panasonic_EVQPUK_EVQPUB | REST1 |
| 1 | SegmaDelta2-4 | Pin_Headers:Pin_Header_Straight_2x05_Pitch2.54mm | SegmaDelta2-4 |
| 1 | TMS320F28377SPTPS | KiCAD:TMS320F28377SPTPS | U1 |
| 1 | UART | Pin_Headers:Pin_Header_Straight_1x05_Pitch2.54mm | UART1 |
| 1 | USB_B_Mini | Connect:USB_Mini-B | USB1 |
Similar boards
- 2 layers90.2 × 95.9 mm

- 2 layers36.5 × 56 mm

- 4 layers17.5 × 35 mm

KungFuSID
Sgw32/KungFuSID
Kung Fu SID is a firmware based on Kung Fu Flash which allows SID emulation
35 parts65 - 2 layers99 × 99.8 mm

- 2 layers13 × 10.2 mm

- 4 layers100 × 100 mm

PCB Motor
SaralTayal123/PCB_Motors
Code & Firmware to generate continuous coil PCB motor designs
33 parts10 - 4 layers100 × 50 mm

Psu ext
PSU-Ext-Org/psu-ext-hardware
A repository to store PSU-EXT hardware design assets, schematics, circuit diagrams, CAD files and manufacturing data.
137 parts9CERN-OHL-S-2.0 - 2 layers55 × 53 mm

Heatgun
m24h/heatgun
A small hot air station for soldering, using type-858 heat gun as handle, STC8G1k17 as MCU, copper wire resistor for cold junction compensation
40 parts3Apache-2.0
Questions
How big is the F28377S PCB?
It measures 86.4 × 69.9 mm and has 4 copper layers, 1.6 mm thick.
What parts does the F28377S use?
174 parts, built around the TMS320F28377SPTPS, 74HC244D, SN65HVD230D and LM321. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the F28377S KiCad files?
From the LE-TOM/TMS320F28377S- repository on GitHub, at the commit this page was made from: the board is F28377S.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the F28377S design in my own project?
Its repository states no licence, so its author keeps all rights: ask LE-TOM before reusing the design.