
Remora
alexthomazo/remora
Contrôleur fil pilote permettant de contrôler 7 zones et un relai.

Watt s up Linky is an open-source printed circuit board by L-E-Lab, from the L-E-Lab/Watt-s-up-Linky repository on GitHub. It is a 2-layer board of 41 × 22.5 mm with 8 parts on 19 nets, routed with 51 tracks and 11 vias.
It is built around the BSS138 and LTV-814S. Its parts include 2 resistors, 1 IC, 1 transistor and 1 connector. It belongs with the ESP32 and RISC-V boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 10k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2 |
| 1 | 282836-2 | 282836:TE_282836-2 | J2 |
| 1 | 3.3k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1 |
| 1 | BSS138 | BSS138:BSS138 | Q1 |
| 1 | LOGO | Logo:foxy_couple_10mm | G*** |
| 1 | LTV-814S | LTV-814S:LTV814 | HY1 |
| 1 | R_Potentiometer | Potentiometer_SMD:Potentiometer_Bourns_3314G_Vertical | RV1 |
| 1 | XIAO-ESP32-C6 | Seeed Studio XIAO Series Library:XIAO-ESP32C6-SMD | U1 |

alexthomazo/remora
Contrôleur fil pilote permettant de contrôler 7 zones et un relai.


dglcinc/pivac
Python library to vacuum data from Raspberry-Pi-based monitoring and control solutions (like HVAC)

StuckAtPrototype/Racer
These are structured into their own files. I could have used submodules, but decided against it.

willem-pennings/balancing-cube
A cube that balances itself in a corner or edge using reaction wheels

abhishek-kakkar/BeagleLogic
A Software Suite that implements a logic analyzer with the PRU on the BeagleBone / BeagleBone Black.


lachlanA/eagle-to-kicad
Eagle SCH/LIB to KiCad SCH/LIB ULP conversion script
It measures 41 × 22.5 mm and has 2 copper layers, 1.69 mm thick.
8 parts, built around the BSS138 and LTV-814S. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the L-E-Lab/Watt-s-up-Linky repository on GitHub, at the commit this page was made from: the board is watt-s-up-linky.kicad_pcb and its schematic watt-s-up-linky.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask L-E-Lab before reusing the design.