Skip to the content
2 layers58.5 × 58.7 mmTASK 5, the printed circuit board in 3D
Size
58.5 × 58.7 mm
Copper layers
2
Thickness
1.6 mm
Parts
21
Nets
34
Pads
118
Tracks, vias
157, 4
Pours
1
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
12 Jun 2024
Updated
13 Aug 2024

Overview

TASK 5 is an open-source printed circuit board by KrishPrakash2310, from the KrishPrakash2310/RoverX repository on GitHub. It is a 2-layer board of 58.5 × 58.7 mm with 21 parts on 34 nets, routed with 157 tracks and 4 vias.

Its parts include 8 resistors, 8 diodes, 2 ICs, 1 connector and 1 switch.

Parts

21
QtyValueFootprintReferences
8LEDLED_SMD:LED_0201_0603MetricD1, D2, D3, D4, D5, D6, D7, D8
8RResistor_SMD:R_0201_0603MetricR1, R2, R3, R4, R5, R6, R7, R8
2~BC501SM:DIL14U1, U2
1BatteryConnector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_VerticalBT1
1Conn_01x08_PinConnector_JST:JST_EH_B8B-EH-A_1x08_P2.50mm_VerticalJ2
1SW_DIP_x08Button_Switch_SMD:SW_DIP_SPSTx08_Slide_6.7x21.88mm_W6.73mm_P2.54mm_LowProfile_JPinSW1

Similar boards

  • 2 layers28.3 × 39.8 mmLevelShifter, the printed circuit board in 3D

    LevelShifter

    gusmanb/logicanalyzer

    24 channel, 100Msps logic analyzer hardware and software

    21 parts5.1kGPL-3.0
  • 2 layers171.2 × 72.9 mmAmiga gfxcard before pour, the printed circuit board in 3D

    Amiga gfxcard before pour

    mntmn/amiga2000-gfxcard

    MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog

    21 parts1k
  • 2 layers93.9 × 46 mmRectifier, the printed circuit board in 3D

    Rectifier

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    21 parts990GPL-3.0
  • 2 layers45.5 × 42.9 mmEsphome han reader, the printed circuit board in 3D

    Esphome han reader

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    21 parts915
  • 2 layers31.8 × 14.5 mmEsp prog, the printed circuit board in 3D

    Esp prog

    drandyhaas/KiCadRoutingTools

    A set of Python/Rust tools to aid routing in KiCad

    21 parts744MIT
  • 2 layers23.5 × 15.8 mmQuiverAttachPCB, the printed circuit board in 3D

    QuiverAttachPCB

    Arrow-air/project-quiver

    Project Quiver documentation, designs, and project artifacts.

    21 parts617CERN-OHL-S-2.0
  • 2 layers69.9 × 41.3 mmHeaterMeterLCD, the printed circuit board in 3D

    HeaterMeterLCD

    CapnBry/HeaterMeter

    HeaterMeter and LinkMeter Arduino BBQ Controller

    21 parts557MIT
  • 2 layers161.3 × 111.8 mmDoj, the printed circuit board in 3D

    Doj

    kelu124/echomods

    Open source ultrasound processing modules and building blocks

    21 parts463

Questions

How big is the TASK 5 PCB?

It measures 58.5 × 58.7 mm and has 2 copper layers, 1.6 mm thick.

What parts does the TASK 5 use?

21 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the TASK 5 KiCad files?

From the KrishPrakash2310/RoverX repository on GitHub, at the commit this page was made from: the board is LED_7408_TASK/TASK_5.kicad_pcb and its schematic LED_7408_TASK/TASK_5.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the TASK 5 design in my own project?

Its repository states no licence, so its author keeps all rights: ask KrishPrakash2310 before reusing the design.