2 layers
Encoder
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.
7 parts4.3kMIT
2 layers70 × 50 mm
FKS-0
KnowScratcher/FKS-0A simple drone made using ESP32.
- Size
- 70 × 50 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 7
- Nets
- 29
- Pads
- 40
- Tracks, vias
- 38, 0
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 2 Jun 2025
- Updated
- 8 Jun 2025
Overview
FKS-0 is an open-source printed circuit board by KnowScratcher, from the KnowScratcher/FKS-0 repository on GitHub. It is a 2-layer board of 70 × 50 mm with 7 parts on 29 nets, routed with 38 tracks and 0 vias.
README
README.mdFKS-0
Parts
7| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | Motor_DC | Connector_Wire:SolderWire-0.15sqmm_1x02_P4mm_D0.5mm_OD1.5mm | M1, M2, M3, M4 |
| 2 | Conn_01x15_Socket | Connector_PinSocket_2.54mm:PinSocket_1x15_P2.54mm_Vertical | J1, J2 |
| 1 | Battery_Cell | Connector_Wire:SolderWire-0.15sqmm_1x02_P4mm_D0.5mm_OD1.5mm | BT1 |
Similar boards
- 2 layers40 × 20 mm
- 2 layers19.8 × 30 mm
- 2 layers35.6 × 58.2 mm
Display Carrier
AxxAxx/AxxSolder
STM32 Based soldering station for JBC cartridges, 9-24 VDC and USB-PD power
7 parts1.7kGPL-3.0 - 2 layers20.3 × 16.3 mm
- 2 layers26 × 44 mm
Compact carrier board
jamro/tiny-engineer
A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.
7 parts1.1k - 2 layers26.4 × 53.8 mm
Atari pickup
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
7 parts1kGPL-3.0 - 2 layers
Questions
How big is the FKS-0 PCB?
It measures 70 × 50 mm and has 2 copper layers, 1.6 mm thick.
What parts does the FKS-0 use?
7 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the FKS-0 KiCad files?
From the KnowScratcher/FKS-0 repository on GitHub, at the commit this page was made from: the board is fks-0/fks-0.kicad_pcb and its schematic fks-0/fks-0.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the FKS-0 design in my own project?
Its repository states no licence, so its author keeps all rights: ask KnowScratcher before reusing the design.