

Avr adc
- Size
- 50.8 × 45.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 20
- Nets
- 20
- Pads
- 80
- Tracks, vias
- 115, 6
- Routed
- Yes
- KiCad
- KiCad 3
- Created
- 7 Oct 2014
- Updated
- 7 Oct 2014
Overview
Avr adc is an open-source printed circuit board by KivApple, from the KivApple/avr-adc repository on GitHub, published under the LGPL-3.0 licence. It is a 2-layer board of 50.8 × 45.7 mm with 20 parts on 20 nets, routed with 115 tracks and 6 vias.
Its parts include 6 capacitors, 6 switches, 3 connectors, 2 resistors and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.
README
README.mdavr-adc
Parts
20| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | CONN_3 | PIN_ARRAY_3X1 | K1, K2, K3, K4, K5, K6 |
| 3 | 100n | C2 | C1, C5, C6 |
| 2 | 22p | C1 | C2, C3 |
| 2 | CONN_4 | PIN_ARRAY_4x1 | P1, P3 |
| 1 | 14.7456MHz | HC-49V | X1 |
| 1 | 1k | R3 | R2 |
| 1 | 4.7k | R3 | R1 |
| 1 | 47u | C1V5 | C4 |
| 1 | ATMEGA8-P | DIP-28__300 | IC1 |
| 1 | CONN_6 | PIN_ARRAY-6X1 | P2 |
| 1 | GREEN | LED-5MM | D1 |
Similar boards
- 2 layers66.9 × 74.5 mm

- 2 layers86.4 × 64.8 mm

- 2 layers36.2 × 26.8 mm

Esp32 minimal
atopile/atopile
Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️
20 parts4kMIT - 2 layers108.1 × 393.8 mm

Sweep compact ble
davidphilipbarr/Sweep
Sweep - a small promicro based keyboard inspired by the Ferris.
20 parts2.1k - 2 layers26 × 15.9 mm

TPS54340 Buck Regulator
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
20 parts1.2k - 2 layers67.6 × 30.5 mm

Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
20 parts1kGPL-3.0 - 2 layers44.3 × 28.7 mm

Lin bus adapter esp32
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
20 parts915 - 2 layers89.5 × 61.6 mm

FreeDeck TH 2020-02
FreeYourStream/freedeck-hardware
all the stuff you need to build your own FreeDeck
20 parts772
Questions
How big is the Avr adc PCB?
It measures 50.8 × 45.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Avr adc use?
20 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Avr adc KiCad files?
From the KivApple/avr-adc repository on GitHub, at the commit this page was made from: the board is schematic/avr-adc.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Avr adc design in my own project?
Its repository publishes it under the LGPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).