Skip to the content
2 layers101.2 × 87 mmStarbie, the printed circuit board in 3D

This is Starbie, project made as part of Half Life by Hack Club. What started as a tamagochi ended as a small TCG helper (with tamagochi of course).

Size
101.2 × 87 mm
Copper layers
2
Thickness
1.6 mm
Parts
11
Nets
25
Pads
56
Tracks, vias
67, 2
Pours
1
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
10 Oct 2026
Updated
26 Oct 2026

Overview

Starbie is an open-source printed circuit board by Kitulik, from the Kitulik/Starbie_Halflife repository on GitHub. It is a 2-layer board of 101.2 × 87 mm with 11 parts on 25 nets, routed with 67 tracks and 2 vias.

It is built around the DHT11. Its parts include 3 connectors, 2 ICs, 2 switches and 1 resistor. It belongs with the ESP32 and RISC-V boards of this library.

Main components

1

README

README.md

Starbie

A smart TCG accesory

This is Starbie, project made as part of Half Life by Hack Club. What started as a tamagochi ended as a small TCG helper (with tamagochi of course).

Schematic

Features

  • Simple tamagochi
  • TCG card counter (Soon)

How it works

Tamagochi is shown on small OLED display. Then it is routed via PCB to the micronontroler where all the magic happens. You can controll Starbie via buttons and tilting it around. (more in Controlls section) The 8 pin is for Gyroscope connection that senses the device's orientation and movement.
And the blue thingy is Enviromental sensor for sencing humidity, temperature, etc.
I added battery so it shouldn`t rely on external power.

Later there will be the TCG counter and to that you will be able to go in menu chose your game and dedicated counter will start. You will be able to controll it thanks to buttons.

Controlls

ButtonFunction
1Opens main menu
2Opens your pets statistics
Tiltingmoving in menu

Bill of Materials

PartWhat it's forQtyUnitTotalVendor
0.96 OLEDDisplay the output1$4.27$4.27Dratek
MPU6050gyroscop1$4.50$4.50Dratek
JST XH 2,54 mm 2-PinConnect battery1$0.03$0.03Dratek
10k resistorresistor1$0.04$0.04Dratek
MX SwitchesButton2$0.69$1.38Allegro
DHT11temperature1$3.86$3.86Dratek
XIAO-ESP32-C3-SMDBrain1$6.60$6.60SeedStudio
PCBmain thing1$2.00$2.00JLPCB
batteryPower source1$4.37$4.37Dratek
Parts subtotal———$27.05—
Tax & shipping———$2.95*—
Total———$30.00—

*Tax & shipping will be different. Made so it fits into the total of $30.00 for funding purposes.

Parts

11
QtyValueFootprintReferences
2SW_PushButton_Switch_Keyboard:SW_Cherry_MX_1.00u_PCBSW1, SW2
110kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR1
1Conn_01x02_PinConnector_JST:JST_XH_S2B-XH-A_1x02_P2.50mm_HorizontalJ3
1Conn_01x04_PinImported Parts:Display_128x64_096_I2CJ1
1Conn_01x08_PinConnector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_VerticalJ2
1DHT11Sensor:Aosong_DHT11_5.5x12.0_P2.54mmU1
1LOGOgraphics:halflife_logoG***
1LOGOgraphics:hackclub_flagG***
1LOGOgraphics:kitulik_logo_bigKitulik
1XIAO-ESP32-C3-SMDImported Parts:XIAO-ESP32-C3-SMDU2

Similar boards

  • 2 layers96.6 × 82.8 mmStarbie, the printed circuit board in 3D

    Starbie

    SharKingStudios/Starbie

    Half-Life Week 1 Example Project

    11 parts28MIT
  • 2 layers100 × 50 mmConveyor belt pcb, the printed circuit board in 3D

    Conveyor belt pcb

    lansidev/conveyor-belt

    Miniature 3D printed conveyor belt for simulation and fun working with sensors, all controllable with Raspberry Pi

    22 parts9MIT
  • 2 layers93 × 20 mmWiFi VFD, the printed circuit board in 3D

    WiFi VFD

    ciisaichan/WiFi-VFD

    开源的ESP8266驱动VFD屏电路,支持BiliBili粉丝数、时间、温度、湿度

    23 parts8MIT
  • 2 layersOpenMQTTGatewayPCB, the printed circuit board in 3D

    OpenMQTTGatewayPCB

    ebrithiljonas/OMG_PCB

    All in One PCB for the OpenMQTTGateway Project

    36 parts7GPL-3.0
  • 2 layers62 × 19.3 mmSniffingTrinket, the printed circuit board in 3D

    SniffingTrinket

    GeorgK/SniffingTrinket

    A room climate monitor using the Adafruit Trinket Pro

    23 parts6GPL-3.0
  • 2 layersArduino relay, the printed circuit board in 3D

    Arduino relay

    bhaskar9980/Guardian

    Guardian is an advanced, fully automated hydroponics system designed to optimize plant growth and maximize yield.

    58 parts5MIT
  • 2 layers100 × 43.5 mmFirefly, the printed circuit board in 3D

    Firefly

    Twistx77/Firefly

    Open WIFI-enabled RGB lamp with temperature, humidity, suspended air particles and eCO2 sensors.

    33 parts5GPL-3.0
  • 2 layers30.5 × 77.5 mmProyecto sensor temperatura, the printed circuit board in 3D

    Proyecto sensor temperatura

    unla-investigacion-desarrollo/ecosistema-iot

    Antes de desarrollar el sistema final, realizamos una etapa de exploración donde investigamos y experimentamos con las siguientes tecnologías:

    8 parts5

Questions

How big is the Starbie PCB?

It measures 101.2 × 87 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Starbie use?

11 parts, built around the DHT11. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Starbie KiCad files?

From the Kitulik/Starbie_Halflife repository on GitHub, at the commit this page was made from: the board is PCB/starbie.kicad_pcb and its schematic PCB/starbie.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Starbie design in my own project?

Its repository states no licence, so its author keeps all rights: ask Kitulik before reusing the design.