2 layers96.6 × 82.8 mm
2 layers64 × 56 mm
APRN Relay
Kitsune-Robotics/kw1fox-2Software and tools for the KW1FOX-2 radio station
- Size
- 64 × 56 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 46
- Nets
- 45
- Pads
- 130
- Tracks, vias
- 191, 44
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 12 Apr 2022
- Updated
- 29 Dec 2022
Overview
APRN Relay is an open-source printed circuit board by Kitsune-Robotics, from the Kitsune-Robotics/kw1fox-2 repository on GitHub, published under the BSD-2-Clause licence. It is a 2-layer board of 64 × 56 mm with 46 parts on 45 nets, routed with 191 tracks and 44 vias.
It is built around the DHT11. Its parts include 12 resistors, 8 connectors, 5 capacitors, 5 diodes and 3 ICs. It belongs with the home automation and IoT boards of this library.
Main components
1README
README.mdkw1fox-2
Software and tools for the KW1FOX-2 radio station
To clone
git clone --recurse-submodules https://github.com/Kitsune-Robotics/kw1fox-2Parts
46| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | PiMountingHole | MountingHole:MountingHole_2.7mm | H1, H2, H3, H4, H5, H6 |
| 4 | 10k | Resistor_SMD:R_0805_2012Metric | R8, R9, R11, R12 |
| 4 | 330R | Resistor_SMD:R_0805_2012Metric | R4, R5, R6, R7 |
| 2 | 100nF | Capacitor_SMD:C_0805_2012Metric | C3, C4 |
| 2 | 1K | Resistor_SMD:R_0805_2012Metric | R2, R10 |
| 2 | 1uF | Capacitor_SMD:C_0805_2012Metric | C1, C5 |
| 1 | 0.1Ω | Resistor_SMD:R_2512_6332Metric | R3 |
| 1 | 10uf | Capacitor_SMD:CP_Elec_4x3 | C2 |
| 1 | A0 | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP4 |
| 1 | A1 | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP3 |
| 1 | BAT | Connector_JST:JST_EH_S2B-EH_1x02_P2.50mm_Horizontal | J8 |
| 1 | CHG | Connector_JST:JST_EH_S2B-EH_1x02_P2.50mm_Horizontal | J6 |
| 1 | DCD | LED_THT:LED_D3.0mm | D3 |
| 1 | DHT11 | Sensor:Aosong_DHT11_5.5x12.0_P2.54mm | U1 |
| 1 | DNP | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | ERR | LED_THT:LED_D3.0mm | D4 |
| 1 | INA219AIDR | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | LOGO | KenwoodFox:KITSUNE_LOGO | G*** |
| 1 | NCV1117ST50T3G | Package_TO_SOT_SMD:SOT-223 | U3 |
| 1 | PTT | Connector_JST:JST_EH_S2B-EH_1x02_P2.50mm_Horizontal | J3 |
| 1 | PWR | LED_THT:LED_D3.0mm | D5 |
| 1 | PWR | Connector_JST:JST_EH_S2B-EH_1x02_P2.50mm_Horizontal | J7 |
| 1 | PWR_BYPAS | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP2 |
| 1 | Pi_Zero | Connector_PinHeader_2.54mm:PinHeader_2x20_P2.54mm_Vertical | J4 |
| 1 | RADIO | Connector_JST:JST_EH_S2B-EH_1x02_P2.50mm_Horizontal | J5 |
| 1 | SERVO1 | Connector_JST:JST_EH_S3B-EH_1x03_P2.50mm_Horizontal | J1 |
| 1 | SERVO2 | Connector_JST:JST_EH_S3B-EH_1x03_P2.50mm_Horizontal | J2 |
| 1 | STAT | LED_THT:LED_D3.0mm | D1 |
| 1 | SolderJumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged_Pad1.0x1.5mm | JP1 |
| 1 | TX | LED_THT:LED_D3.0mm | D2 |
The 44 most common of 46 parts.
Similar boards
- 2 layers100 × 50 mm
Conveyor belt pcb
lansidev/conveyor-belt
Miniature 3D printed conveyor belt for simulation and fun working with sensors, all controllable with Raspberry Pi
22 parts9MIT - 2 layers93 × 20 mm
- 2 layers
OpenMQTTGatewayPCB
ebrithiljonas/OMG_PCB
All in One PCB for the OpenMQTTGateway Project
36 parts7GPL-3.0 - 2 layers62 × 19.3 mm
SniffingTrinket
GeorgK/SniffingTrinket
A room climate monitor using the Adafruit Trinket Pro
23 parts6GPL-3.0 - 2 layers
Arduino relay
bhaskar9980/Guardian
Guardian is an advanced, fully automated hydroponics system designed to optimize plant growth and maximize yield.
58 parts5MIT - 2 layers100 × 43.5 mm
Firefly
Twistx77/Firefly
Open WIFI-enabled RGB lamp with temperature, humidity, suspended air particles and eCO2 sensors.
33 parts5GPL-3.0 - 2 layers30.5 × 77.5 mm
Proyecto sensor temperatura
unla-investigacion-desarrollo/ecosistema-iot
Antes de desarrollar el sistema final, realizamos una etapa de exploración donde investigamos y experimentamos con las siguientes tecnologías:
8 parts5
Questions
How big is the APRN Relay PCB?
It measures 64 × 56 mm and has 2 copper layers, 1.6 mm thick.
What parts does the APRN Relay use?
46 parts, built around the DHT11. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the APRN Relay KiCad files?
From the Kitsune-Robotics/kw1fox-2 repository on GitHub, at the commit this page was made from: the board is Hardware/APRN_Relay/APRN_Relay.kicad_pcb and its schematic Hardware/APRN_Relay/APRN_Relay.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the APRN Relay design in my own project?
Its repository publishes it under the BSD-2-Clause licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).