
Lora fence monitor
Luddi1/LoRaWAN-fence-monitor
Hardware and software for electric fence monitor with LoRaWAN

/ ) | | ( ( | | | | \ \| | ( ) |/ ) \ ) ) | | | || || ( (| | | | (/|)||| \))\)| || (C)2013 Semtech-Cycleo
Prototype is an open-source printed circuit board by Kiogora, from the Kiogora/esp32_lora_gateway repository on GitHub. It is a 2-layer board of 177.8 × 111.8 mm with 81 parts on 100 nets, routed with 6,349 tracks and 736 vias.
It is built around the TLV71333PDBV, DTC143Z and SI2323. Its parts include 16 capacitors, 11 resistors, 7 connectors, 6 diodes and 5 ICs.
/ _____) _ | |
( (____ _____ ____ _| |_ _____ ____| |__
\____ \| ___ | (_ _) ___ |/ ___) _ \
_____) ) ____| | | || |_| ____( (___| | | |
(______/|_____)_|_|_| \__)_____)\____)_| |_|
(C)2013 Semtech-CycleoThis directory contains the sources of the library to build a gateway based on a Semtech LoRa multi-channel RF receiver (a.k.a. concentrator). Once compiled all the code is contained in the libloragw.a file that will be statically linked (ie. integrated in the final executable).
The library must be configured by editing the library.cfg file to set target platform, SPI interface, etc.
The library also comes with a bunch of basic tests programs that are used to test the different sub-modules of the library.
Those programs are included in the project to provide examples on how to use the HAL library, and to help the system builder test different parts of it.
This software is used to set up a LoRa concentrator using a JSON configuration file and then record all the packets received in a log file, indefinitely, until the user stops the application.
This software is used to check the reliability of the link between the host platform (on which the program is run) and the LoRa concentrator register file that is the interface through which all interaction with the LoRa concentrator happens.
This software is used to send test packets with a LoRa concentrator. The packets contain little information, on no protocol (ie. MAC address) information but can be used to assess the functionality of a gateway downlink using other gateways as receivers.
This software is used to set LoRa concentrator in Tx continuous mode, for spectral measurement.
This software is used to scan the spectral band in background, where the LoRa gateway operates.
This software is used to test "Listen-Before-Talk" channels timestamps.
This script must be launched on IoT Start Kit platform to reset concentrator chip through GPIO, before starting any application using the concentrator.
WARNING: Systems which do not have the patch will be more prone to packet loss over time, when the crystals of the end-devices will be ageing and have more frequency offset.
Note: The provided LBT feature has been validated for Japan only, and supports 8 downlink channels maximum.
WARNING: If you are using a Semtech SX1301AP2 ref design (GW1.5), the FPGA must be reprogrammed with one of the images provided with this release (fpga/ dir).
** WARNING: ** ** Known issue: a problem with carrier leakage calibration has been seen on 433MHz boards. **
/!\ warning: Kerlink 868 27dBm gateway includes a FPGA that MUST be programmed before running any application
/!\ warning: due to start delay compensation being implemented, TX that were previously 1.5ms late will be sent on time. At low datarate, this is not an issue. At high LoRa data rate (and FSK) you might have to adjust your timing.
Private release, not taken into account in that changelog.
The information presented in this project documentation does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent or other industrial or intellectual property rights. Semtech assumes no responsibility or liability whatsoever for any failure or unexpected operation resulting from misuse, neglect improper installation, repair or improper handling or unusual physical or electrical stress including, but not limited to, exposure to parameters beyond the specified maximum ratings or operation outside the specified range.
SEMTECH PRODUCTS ARE NOT DESIGNED, INTENDED, AUTHORIZED OR WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT APPLICATIONS, DEVICES OR SYSTEMS OR OTHER CRITICAL APPLICATIONS. INCLUSION OF SEMTECH PRODUCTS IN SUCH APPLICATIONS IS UNDERSTOOD TO BE UNDERTAKEN SOLELY AT THE CUSTOMER'S OWN RISK. Should a customer purchase or use Semtech products for any such unauthorized application, the customer shall indemnify and hold Semtech and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs damages and attorney fees which could arise.
EOF
| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | Jumper_NC_Dual | lib_fp:PinHeader_1x03_P2.54mm_staggered_Vertical | JP2, JP3, JP4, JP5, JP7, JP8, JP9, JP10, JP11, JP12, JP13, JP14, JP15, JP16, JP17 |
| 8 | 0.1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.50mm_HandSolder | C1, C4, C5, C7, C8, C10, C14, C16 |
| 4 | LED | LED_SMD:LED_0805_2012Metric_Pad0.97x1.50mm_HandSolder | D3, D4, D5, D6 |
| 4 | Mounting_Hole_PAD | MountingHole:MountingHole_3.2mm_M3_Pad_Via | MK1, MK2, MK3, MK4 |
| 3 | 10k | Resistor_SMD:R_0805_2012Metric | R1, R2, R3 |
| 3 | 220uF | Capacitor_SMD:CP_Elec_6.3x5.8 | C11, C12, C15 |
| 3 | Jumper | lib_fp:PinHeader_1x02_P2.54mm_staggered_Vertical | JP18, JP19, JP20 |
| 2 | 10uF | Capacitor_SMD:C_1206_3216Metric_Pad1.24x1.80mm_HandSolder | C6, C13 |
| 2 | 130R | Resistor_SMD:R_0805_2012Metric | R9, R10 |
| 2 | 4.7k | Resistor_SMD:R_0805_2012Metric | R4, R5 |
| 2 | Conn_01x04 | lib_fp:PinHeader_1x04_P2.54mm_staggered_Vertical | J3, J4 |
| 2 | D_TVS | digikey-footprints:DO-214AC | D1, D2 |
| 2 | Fuse_Small | lib_fp:461_series_Telelink | F1, F2 |
| 2 | GDT- | lib_fp:SL1411A075-SM | GDT1, GDT2 |
| 2 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP21 |
| 1 | 0734120114 | digikey-footprints:Molex_734120114_UMC_RF_CONN_Vertical | J2 |
| 1 | 1.5k | Resistor_SMD:R_0805_2012Metric | R7 |
| 1 | 100pF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.50mm_HandSolder | C9 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.50mm_HandSolder | C2 |
| 1 | 110R | Resistor_SMD:R_0805_2012Metric | R8 |
| 1 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.50mm_HandSolder | C3 |
| 1 | 300R | Resistor_SMD:R_0805_2012Metric | R11 |
| 1 | 33R | Resistor_SMD:R_0805_2012Metric | R6 |
| 1 | Battery-holder | lib_fp:BAT-HLD-001-xx-OTL | J6 |
| 1 | Conn_02x07_Odd_Even | lib_fp:lan_waveshare_8720 | J5 |
| 1 | Conn_02x12_Odd_Even | lib_fp:Hybrid_concentrator | J7 |
| 1 | DTC143Z | Package_TO_SOT_SMD:SC-59_Handsoldering | Q2 |
| 1 | DevkitC | lib_fp:ESP32_DEVKITC | U4 |
| 1 | Jack-DC | Connector_BarrelJack:BarrelJack_Horizontal | J1 |
| 1 | Jumper_3_Open | lib_fp:PinHeader_1x03_P2.54mm_staggered_Vertical | JP6 |
| 1 | LM2596_MODULE | lib_fp:LM2596_MODULE | U3 |
| 1 | LOGO | logo:LoRa_logo | G*** |
| 1 | LOGO | logo:Kaiote_logo | G*** |
| 1 | LOGO | logo:Wakanda_logo | G*** |
| 1 | MIKROE_3G_CLICK | lib_fp:MIKROE_UG95 | U5 |
| 1 | QUECTEL_L80 | lib_fp:QUECTEL_L80-M39 | U1 |
| 1 | Si2323 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | TLV71333PDBV | Package_TO_SOT_SMD:SOT-23-5 | U2 |
The 79 most common of 81 parts.

Luddi1/LoRaWAN-fence-monitor
Hardware and software for electric fence monitor with LoRaWAN

kamorrissey/pic-ir-thermometer
Open-source hardware and firmware for a PIC16LF19156-driven IR non-contact thermometer using a Melexis MLX90614 sensor and Lumex LCD-S401M16KR LCD segment display.

RobbeElsermans/track-mower
A grass mower with some tracks attached to it. Its a concept.

RWTH-EBC/OSIGBApp
Open-Source Internet of Things (IoT) Gateways for Building Automation Applications

MouseBiteLabs/Super-Game-Boy-Plus
A replacement circuit board for improving the Super Game Boy, or for creating a standalone Game Boy game for the SNES.

AyushShuklaaa7/USB-C-to-I2C-Interface-FT201XS-
A compact and simple USB-C to I2C interface built using the FT201XS IC. This board is designed to provide an easy way to communicate with I2C devices directly from a computer via USB.

It measures 177.8 × 111.8 mm and has 2 copper layers, 1.6 mm thick.
81 parts, built around the TLV71333PDBV, DTC143Z and SI2323. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Kiogora/esp32_lora_gateway repository on GitHub, at the commit this page was made from: the board is hardware/prototype/prototype.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Kiogora before reusing the design.