Skip to the content
4 layers250 × 50 mmGen11 Module PCB, the printed circuit board in 3D
Size
250 × 50 mm
Copper layers
4
Thickness
1.6 mm
Parts
13
Nets
9
Pads
70
Tracks, vias
138, 7
Pours
2
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
6 Aug 2026
Updated
6 Aug 2026

Overview

Gen11 Module PCB is an open-source printed circuit board by KieraChiu, from the KieraChiu/CalSol-Gen11-Module-PCB repository on GitHub. It is a 4-layer board of 250 × 50 mm with 13 parts on 9 nets, routed with 138 tracks and 7 vias.

It is built around the NCU18WB473D6SRB.

Main components

1

Parts

13
QtyValueFootprintReferences
4NCU18WB473D6SRBThermistor:THERM_NXRT15WB473FA3A016 (Through-hole thermistor)RT1, RT2, RT3, RT4
270551-00723-pin molex:3-pin Molex (Vertical)J3, J4
27055100756-pin molex:6-pin molex (vertical)J1, J2
2WP-BUCFWurth:Vertical Wurth TerminalMP1, MP2
1NCU18WB473D6SRBThermistor:THRMC1608X95N (Surface-mount Thermistor)RT5

The 11 most common of 13 parts.

Similar boards

  • 4 layers31.6 × 84.1 mmMCL68, the printed circuit board in 3D

    MCL68

    MicroCoreLabs/Projects

    Ted Fried's MicroCore Labs Projects - FPGA CPU cores and emulators for the 8088, 8086, 8051, 6502, 68000, Z80, Risc-V, and also Typewriter and EPROM Emulator projects.

    13 parts534
  • 4 layers33 × 32 mmDoorman slot programmer, the printed circuit board in 3D

    Doorman slot programmer

    AzonInc/Doorman

    ESP32-S3 based Intercom Gateway (TCS / Koch / Niko / Scantron / Analogue Systems)

    13 parts252GPL-3.0
  • 4 layers25 × 20.5 mmRefclk breakout, the printed circuit board in 3D

    Refclk breakout

    loxodes/vna

    Under development open hardware microwave vector network analyzer

    13 parts205
  • 4 layers59 × 20 mmPmod mmcx, the printed circuit board in 3D

    Pmod mmcx

    azonenberg/starshipraider

    Open hardware test equipment

    13 parts193BSD-3-Clause
  • 4 layers14 × 23.2 mmQspimux2, the printed circuit board in 3D

    Qspimux2

    felixheld/qspimux

    QSPI flash multiplexer - connect a SPI NOR flash to either an embedded system or a programmer for remote firmware tests

    13 parts57CC-BY-SA-4.0
  • 4 layers18 × 16.5 mmUDB, the printed circuit board in 3D

    UDB

    Unified-Daughterboard/UDB-C-EZM

    For more details on the Unified Daughterboard project, see the main website.

    13 parts45MIT

Questions

How big is the Gen11 Module PCB PCB?

It measures 250 × 50 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Gen11 Module PCB use?

13 parts, built around the NCU18WB473D6SRB. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Gen11 Module PCB KiCad files?

From the KieraChiu/CalSol-Gen11-Module-PCB repository on GitHub, at the commit this page was made from: the board is Gen11 Module PCB.kicad_pcb and its schematic Gen11 Module PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Gen11 Module PCB design in my own project?

Its repository states no licence, so its author keeps all rights: ask KieraChiu before reusing the design.