Skip to the content
2 layers57.5 × 40 mmTransformerless power, the printed circuit board in 3D

A custom transformerless power supply PCB designed using KiCad to convert AC input into a regulated 5V DC output. The design includes capacitive input current limiting, bridge rectification, filtering, voltage regulation, Zener-based protection, and LED indication.

Size
57.5 × 40 mm
Copper layers
2
Thickness
1.6 mm
Parts
19
Nets
9
Pads
37
Tracks, vias
41, 0
Pours
1
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
13 Aug 2026
Updated
13 Aug 2026

Overview

Transformerless power is an open-source printed circuit board by KhushiShah63, from the KhushiShah63/Transformerless-Power-PCB repository on GitHub. It is a 2-layer board of 57.5 × 40 mm with 19 parts on 9 nets, routed with 41 tracks and 0 vias.

Its parts include 7 diodes, 4 capacitors, 4 resistors, 2 connectors and 1 IC. It belongs with the power and interfaces and adapters boards of this library.

README

README.md

Transformerless Power Supply PCB

A custom transformerless power supply PCB designed using KiCad to convert AC input into a regulated 5V DC output. The design includes capacitive input current limiting, bridge rectification, filtering, voltage regulation, Zener-based protection, and LED indication.

⚠️ Safety Warning: This circuit is designed for AC mains input and does not provide transformer-based galvanic isolation. It should be handled only with appropriate electrical safety precautions.

📌 Project Overview

This project focuses on the design of a compact transformerless AC-to-DC power supply PCB.

The circuit accepts AC input through a screw terminal, uses a capacitive current-limiting stage followed by a bridge rectifier, filters the rectified DC voltage, and regulates the output to approximately 5V using an LM7805 voltage regulator.

The complete PCB was designed using KiCad, including schematic capture, component placement, routing, PCB layout, DRC checking, and Gerber generation.

🔧 Tools Used

  • KiCad
  • Schematic Editor
  • PCB Editor
  • Gerber Viewer

⚙️ Key Features

  • Transformerless AC-to-DC conversion
  • Bridge rectification using 1N4007 diodes
  • Capacitive input current limiting
  • DC filtering using electrolytic capacitors
  • Zener-based voltage protection
  • 5V voltage regulation using LM7805
  • LED power/status indication
  • Custom PCB layout
  • Gerber files generated for manufacturing

🧩 Components Used

ReferenceComponentValue / Part
J1AC Input TerminalScrew Terminal
C1Capacitor225k/2.2µF
R1Resistor1MΩ
D1–D4Rectifier Diodes1N4007
C2Capacitor0.1µF
C3Electrolytic Capacitor1000µF
D5–D6Zener DiodesZener
R2–R3Resistors20kΩ
R4LED Resistor2.2kΩ
D7LEDLED
U1Voltage RegulatorLM7805
C4Output Capacitor470µF
J2DC Output TerminalScrew Terminal

🔌 Circuit / Schematic

The schematic consists of the following main stages:

1. AC Input & Current Limiting

The AC input is provided through the J1 screw terminal. The input stage uses C1 and R1 before the rectification stage.

2. Bridge Rectifier

Four 1N4007 diodes (D1–D4) are used to form the bridge rectifier and convert the AC input into pulsating DC.

3. DC Filtering

C2 and C3 are used in the rectified DC section for filtering and smoothing the voltage.

4. Zener Protection

The circuit includes two Zener diodes (D5 and D6) with associated resistors (R2 and R3) for voltage regulation/protection in the DC section.

5. 5V Regulation

The filtered DC voltage is supplied to the LM7805 regulator (U1), which provides a regulated 5V output.

6. LED Indication

D7 provides visual indication, with R4 = 2.2kΩ used as the LED current-limiting resistor.

7. Output Filtering

C4 = 470µF is connected at the output side to provide additional filtering before the 5V output is delivered through J2.

🖼️ Schematic

image

🖥️ PCB Layout

image

🧱 3D PCB View

image

📦 Gerber Files

The generated Gerber and drill files are included in the gerber/ folder for PCB manufacturing.

Parts

19
QtyValueFootprintReferences
41N4007Diode_THT:D_DO-41_SOD81_P10.16mm_HorizontalD1, D2, D3, D4
220kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR2, R3
2D_ZenerDiode_THT:D_A-405_P7.62mm_HorizontalD5, D6
2Screw_Terminal_01x02TerminalBlock:TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mmJ1, J2
10.1ufCapacitor_THT:C_Disc_D4.7mm_W2.5mm_P5.00mmC2
11000ufCapacitor_THT:CP_Radial_D8.0mm_P3.50mmC3
11MResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR1
12.2kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR4
1225k/2.2uFCapacitor_THT:C_Rect_L18.0mm_W6.0mm_P15.00mm_FKS3_FKP3C1
1470uFCapacitor_THT:CP_Radial_D8.0mm_P3.50mmC4
1LEDLED_THT:LED_D5.0mmD7
1LM7805_TO220Package_TO_SOT_THT:TO-220-3_VerticalU1

The 18 most common of 19 parts.

Similar boards

  • 2 layers43.9 × 27.7 mmTcd1304-4v, the printed circuit board in 3D

    Tcd1304-4v

    OpnTec/open-spectrometer-hardware

    Open source VIS spectrometer

    19 parts1.5k
  • 2 layers50 × 60 mmDebate Device, the printed circuit board in 3D

    Debate Device

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    19 parts915
  • 2 layers102.9 × 96.7 mmISA adapter, the printed circuit board in 3D

    ISA adapter

    polpo/picogus

    Emulation of ISA sound cards and CD-ROM on Raspberry Pi Pico (GUS, SB/Adlib, MPU-401, Tandy, CMS, Panasonic CD-ROM) with USB mouse/joystick support

    19 parts805
  • 2 layers60 × 39 mmPs2usb, the printed circuit board in 3D

    Ps2usb

    rasteri/HIDman

    Adapting USB devices to work on old computers

    19 parts432
  • 2 layers70.1 × 43.2 mmIaq device, the printed circuit board in 3D

    Iaq device

    nkitanov/iaq_board

    IAQ Board is a DIY (Do-It-Yourself) device for measuring internal air quality

    19 parts396
  • 2 layers80 × 80 mmGB BRK CPU G1, the printed circuit board in 3D

    GB BRK CPU G1

    Gekkio/gb-hardware

    Game Boy -related custom hardware by gekkio

    19 parts379CC-BY-4.0
  • 2 layers25.4 × 25.4 mmIna169, the printed circuit board in 3D

    Ina169

    Ardumower/ardumower

    Develop an open source robotic lawn mower (HW+SW reference platform)

    19 parts282
  • 2 layers58.4 × 28.6 mmNew rele, the printed circuit board in 3D

    New rele

    zmaker/arduino_cookbook

    gli sketch del nuovo progetto Arduino Cookbook e dei video di YouTube

    19 parts269

Questions

How big is the Transformerless power PCB?

It measures 57.5 × 40 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Transformerless power use?

19 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Transformerless power KiCad files?

From the KhushiShah63/Transformerless-Power-PCB repository on GitHub, at the commit this page was made from: the board is Transformerless power.kicad_pcb and its schematic Transformerless power.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Transformerless power design in my own project?

Its repository states no licence, so its author keeps all rights: ask KhushiShah63 before reusing the design.