
Vortac Panel REV1
VortacDesign/VortacToolchanger
Modular toolchanger system for 3D printers – designed for VORON-style machines. Includes mechanical files, wiring guides, firmware configuration and setup scripts.

My first generic STM32 board made for learning PCB designing
Owl v1 is an open-source printed circuit board by KhalidOwlWalid, from the KhalidOwlWalid/OwlKit-F103 repository on GitHub. It is a 4-layer board of 49.7 × 75.8 mm with 64 parts on 74 nets, routed with 696 tracks and 102 vias.
It is built around the STM32F103C8T6, SN65HVD230D and FT230XS-R, with the TLV73333PDBV among its other parts. Its parts include 19 capacitors, 18 resistors, 9 connectors, 4 ICs and 4 diodes. It belongs with the STM32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 100nF | Capacitor_SMD:C_0603_1608Metric | C2, C3, C4, C13, C15, C16, C18 |
| 5 | 47kR | Resistor_SMD:R_0603_1608Metric | R12, R13, R14, R15, R16 |
| 4 | 1uF | Capacitor_SMD:C_0603_1608Metric | C5, C6, C14, C19 |
| 3 | 1kR | Resistor_SMD:R_0603_1608Metric | R10, R17, R18 |
| 3 | ~ | TestPoint:TestPoint_Pad_D1.5mm | TP1, TP2, TP3 |
| 2 | 0R | Resistor_SMD:R_0603_1608Metric | R3, R6 |
| 2 | 10kR | Resistor_SMD:R_0603_1608Metric | R1, R11 |
| 2 | 10uF | Capacitor_SMD:C_0603_1608Metric | C1, C17 |
| 2 | 25pF | Capacitor_SMD:C_0603_1608Metric | C7, C8 |
| 2 | 27R | Resistor_SMD:R_0603_1608Metric | R4, R5 |
| 2 | 47pF | Capacitor_SMD:C_0603_1608Metric | C11, C12 |
| 2 | 4pF | Capacitor_SMD:C_0603_1608Metric | C9, C10 |
| 2 | 5k1R | Resistor_SMD:R_0603_1608Metric | R8, R9 |
| 1 | 100R | Inductor_SMD:L_0603_1608Metric | FB1 |
| 1 | 100kR | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 120R | Resistor_SMD:R_0603_1608Metric | R7 |
| 1 | 27nH | Inductor_SMD:L_0603_1608Metric | L1 |
| 1 | 32k768 | Crystal:Crystal_SMD_MicroCrystal_CC8V-T1A-2Pin_2.0x1.2mm_HandSoldering | Y2 |
| 1 | 8MHz | Crystal:Crystal_SMD_HC49-SD | Y1 |
| 1 | BLUE | LED_SMD:LED_0603_1608Metric | D3 |
| 1 | D_Schottky | Diode_SMD:D_0603_1608Metric | D4 |
| 1 | External GPIOs | Connector_PinHeader_2.54mm:PinHeader_1x12_P2.54mm_Vertical | J8 |
| 1 | FT230XS | Package_SO:SSOP-16_3.9x4.9mm_P0.635mm | U3 |
| 1 | GREEN | LED_SMD:LED_0603_1608Metric | D2 |
| 1 | I2C | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J5 |
| 1 | I2C OLED | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J7 |
| 1 | JST-PH Battery | Connector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J10 |
| 1 | Jumper_2_Open | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 1 | LOGO | LOGO | Owl v0.1 |
| 1 | Micro_SD_Card_Det_Hirose_DM3AT | Connector_Card:microSD_HC_Hirose_DM3AT-SF-PEJM5 | J6 |
| 1 | RED | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | SN65HVD230 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U4 |
| 1 | SPI1_IMU | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J4 |
| 1 | STM32F103C8T6 | Package_QFP:LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | SWD | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | SW_SPDT | Button_Switch_SMD:SW_SPDT_CK_JS102011SAQN | SW1 |
| 1 | Screw_Terminal_01x03 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-3-3.5-H_1x03_P3.50mm_Horizontal | J3 |
| 1 | TLV73333PDBV | Package_TO_SOT_SMD:SOT-23-5 | U5 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |

VortacDesign/VortacToolchanger
Modular toolchanger system for 3D printers – designed for VORON-style machines. Includes mechanical files, wiring guides, firmware configuration and setup scripts.





Prap04/STM32_POWER_CONTROLLER_BOARD_DESIGN-
This project involves the design and development of a custom STM32F103C8T6-based embedded control board integrating power management, sensor interfaces, and industrial communication protocols.


It measures 49.7 × 75.8 mm and has 4 copper layers, 1.6 mm thick.
64 parts, built around the STM32F103C8T6, SN65HVD230D, FT230XS-R and TLV73333PDBV. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the KhalidOwlWalid/OwlKit-F103 repository on GitHub, at the commit this page was made from: the board is owl_v1.kicad_pcb and its schematic GPIOs.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask KhalidOwlWalid before reusing the design.