Skip to the content
2 layers53 × 62 mmIon ppu board, the printed circuit board in 3D

This Ion Propulsion Power Processing Unit (PPU) is a simulation-first hardware and embedded software project that converts a standard 24 V DC spacecraft bus into four independently regulated power stages: a 50–100 V…

Size
53 × 62 mm
Copper layers
2
Thickness
1.6 mm
Parts
13
Nets
37
Pads
84
Tracks, vias
285, 0
Pours
2
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
20 Aug 2026
Updated
25 Aug 2026

Overview

Ion ppu board is an open-source printed circuit board by Kfos1021, from the Kfos1021/Ion-Propulsion-PPU repository on GitHub. It is a 2-layer board of 53 × 62 mm with 13 parts on 37 nets, routed with 285 tracks and 0 vias.

It is built around the RB238NS150TL. Its parts include 4 resistors, 2 capacitors, 2 diodes, 2 transistors and 2 inductors.

Main components

1

README

README.md

Spacecraft Ion Propulsion Power Processing Unit

This Ion Propulsion Power Processing Unit (PPU) is a simulation-first hardware and embedded software project that converts a standard 24 V DC spacecraft bus into four independently regulated power stages: a 50–100 V Boost/Flyback Beam supply and a 12–24 V Discharge supply .The architecture integrates closed-loop LTspice circuit modeling, a 8-state bare-metal C++ safety state machine with active hardware interlocks, a Python dynamic thruster load simulator with a Software-in-the-Loop (SiL) socket interface, and a fully routed 2-layer KiCad PCB layout validated to a Design Rule Check (DRC) pass.

Screenshot 2026-08-24 at 9 49 00 PM

System Diagram of PPU

v_beam_results

Beam Boost Converter Transient & Regulation Response

v_discharge_results

Buck Converter Regulation Response

Screenshot 2026-08-24 at 9 55 37 PM

Route Diagram

ppu_3d_render

3D View of PPU

Parts

13
QtyValueFootprintReferences
210kResistor_SMD:R_0805_2012MetricR2, R4
2RB238NS150Package_TO_SOT_SMD:TO-252-2D1, D2
1100uhInductor_SMD:L_12x12mm_H8mmL2
110uFCapacitor_SMD:C_0805_2012MetricC1
11mhInductor_SMD:L_12x12mm_H8mmL1
122uFCapacitor_SMD:C_0805_2012MetricC2
1390kResistor_SMD:R_0805_2012MetricR1
150kResistor_SMD:R_0805_2012MetricR3
1IRFH5250Package_TO_SOT_SMD:TO-252-2Q1
1Q_PMOS_GSDPackage_TO_SOT_SMD:TO-252-2Q2
1Raspberry_Pi_2_3Connector_PinHeader_2.54mm:PinHeader_2x20_P2.54mm_VerticalJ1

Similar boards

  • 2 layers40 × 20 mmUsb uart, the printed circuit board in 3D

    Usb uart

    earthtojake/text-to-cad

    Design physical products with AI

    13 parts26kMIT
  • 2 layers35 × 29 mmMagSpoofTC, the printed circuit board in 3D

    MagSpoofTC

    samyk/magspoof

    A portable device that can spoof/emulate any magnetic stripe, credit card or hotel card "wirelessly", even on standard magstripe (non-NFC/RFID) readers.

    13 parts4.2k
  • 2 layers20.6 × 23.6 mmAO-03 signal amplifier, the printed circuit board in 3D

    AO-03 signal amplifier

    fossasia/pslab-scripts

    Pocket Science Lab - Scripts for Sensor Experiments

    13 parts1.6kApache-2.0
  • 2 layers47 × 35.6 mmMX7-C-35PL C11, the printed circuit board in 3D

    MX7-C-35PL C11

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    13 parts1.2k
  • 2 layers95 × 95 mmCube batteryboard, the printed circuit board in 3D

    Cube batteryboard

    willem-pennings/balancing-cube

    A cube that balances itself in a corner or edge using reaction wheels

    13 parts1.1kGPL-3.0
  • 2 layers15.2 × 20.3 mmPt100stick, the printed circuit board in 3D

    Pt100stick

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    13 parts1.1kGPL-3.0
  • 2 layers53.9 × 23.2 mmBuffer, the printed circuit board in 3D

    Buffer

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    13 parts1kGPL-3.0

Questions

How big is the Ion ppu board PCB?

It measures 53 × 62 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Ion ppu board use?

13 parts, built around the RB238NS150TL. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Ion ppu board KiCad files?

From the Kfos1021/Ion-Propulsion-PPU repository on GitHub, at the commit this page was made from: the board is pcb/ion_ppu_board/ion_ppu_board.kicad_pcb and its schematic pcb/ion_ppu_board/ion_ppu_board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Ion ppu board design in my own project?

Its repository states no licence, so its author keeps all rights: ask Kfos1021 before reusing the design.