
Katia
ikajdan/katia
A split keyboard with 6 by 3 column staggered keys and 3 thumb keys, based on the Crkbrd design

This is a replica PCB for the NEO60 CORE.
Neo60core RP2040 is an open-source printed circuit board by Keyboard-PCB-Replica-Project, from the Keyboard-PCB-Replica-Project/neo60core_RP2040 repository on GitHub. It is a 2-layer board of 284.8 × 94.3 mm with 178 parts on 118 nets, routed with 742 tracks and 72 vias.
It is built around the RP2040, W25Q128JVSIQ and ABM8-272-T3. Its parts include 66 diodes, 16 capacitors, 7 switches, 6 resistors and 3 ICs. It belongs with the RP2040 boards of this library.
NEO60 CORE 레플리카 PCB입니다.
NEO60 CU에 체결이 되기는 하나, 실제 작동하는지는 확인하지 못했습니다.
추후에 확인해보겠습니다!
LED는 따로 부착해두지 않았습니다.
KT-0805W LED를 구입해서 LED 자리에 납땜해주시면 됩니다. 타오바오나 알리에서 같이 주문해주시면 되며,
납땜 난이도는 스위치보다도 못한 수준입니다.
물론 돈이 더 들어도 괜찮다면, LED까지 부착이 된 채로 배송 오는 옵션을 구현해두겠습니다.
추후에 추가될 수도 있습니다.
추가 필요 부품 : KT-0805W LED
작동 확인 여부 : O
This is a replica PCB for the NEO60 CORE.
It fits the NEO60 CU, but I haven’t confirmed if it actually works yet.
I’ll test it later.
LEDs are not included.
You can buy KT-0805W LEDs and solder them yourself.
They’re easy to find on Taobao or AliExpress, and soldering them is even easier than switches.
If you're okay with a bit more cost, I might offer a version with the LEDs pre-installed.
It might be updated later.
Extra parts needed: KT-0805W LEDs
Tested and working: verified
| Qty | Value | Footprint | References |
|---|---|---|---|
| 77 | MX_SW_solder | ScottoKeebs_MX:MX_PCB_1.00u_NoSilkscreen3 | MX1, MX2, MX10, MX11, MX12, MX13, MX14, MX15, MX16, MX17, MX18, MX19, MX20, MX21, MX22, MX23 +61 |
| 65 | D_Small | ScottoKeebs_Components:Diode_SOD-123_noref | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +49 |
| 10 | 100n | Capacitor_SMD:C_0805_2012Metric | C1, C2, C3, C4, C5, C6, C7, C9, C10, C16 |
| 5 | MX_stab | ScottoKeebs_Stabilizer:Stabilizer_MX_2.00u | S2, S14, S41, S42, S53 |
| 4 | 1u | Capacitor_SMD:C_0805_2012Metric | C8, C11, C12, C13 |
| 2 | 15p | Capacitor_SMD:C_0805_2012Metric | C14, C15 |
| 2 | 27.4 | Resistor_SMD:R_0805_2012Metric | R1, R2 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric | R5 |
| 1 | 1K | Resistor_SMD:R_0805_2012Metric | R4 |
| 1 | 1k | Resistor_SMD:R_0805_2012Metric | R6 |
| 1 | 300R | Resistor_SMD:R_0805_2012Metric | R3 |
| 1 | ABM8-272-T3 | Oscillator:Oscillator_SMD_EuroQuartz_XO32-4Pin_3.2x2.5mm | Y1 |
| 1 | Conn_01x05 | hjcustom:pogo_2.54mm_1x5 | J1 |
| 1 | LED | hjcustom:KT-0805W | D65 |
| 1 | MX_stab | ScottoKeebs_Stabilizer:Stabilizer_MX_7.00u | S1 |
| 1 | MX_stab | ScottoKeebs_Stabilizer:Stabilizer_MX_6.25u | S57 |
| 1 | RP2040 | RP2040_minimal:RP2040-QFN-56 | U1 |
| 1 | SW_Push | Button_Switch_SMD:SW_Push_1P1T_XKB_TS-1187A | BOOTSEL1 |
| 1 | W25Q128JVS | Package_SO:SOIC-8_5.23x5.23mm_P1.27mm | U3 |
| 1 | XC6206PxxxMR | Package_TO_SOT_SMD:SOT-23 | U2 |

ikajdan/katia
A split keyboard with 6 by 3 column staggered keys and 3 thumb keys, based on the Crkbrd design

alvarop/swd2usbc
Have you ever wanted to debug your device over USB-C? Sometimes there's not enough room for a JTAG/SWD connector, or even Tag-Connect pads!



pedalboard/pedalboard-hw
pedalboard audio midi processor open hardware



Thinkpad4by3/chibitron
Electrostatic CRT driver designed from the ground up for performance, versatility and ease-of-manufacturability
It measures 284.8 × 94.3 mm and has 2 copper layers, 1.6 mm thick.
178 parts, built around the RP2040, W25Q128JVSIQ and ABM8-272-T3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Keyboard-PCB-Replica-Project/neo60core_RP2040 repository on GitHub, at the commit this page was made from: the board is neo60core_rp2040.kicad_pcb and its schematic neo60core_rp2040.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Keyboard-PCB-Replica-Project before reusing the design.