

CircuitBoards
My Motorola 680x0 home built computer system
- Size
- 203.2 × 170.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 21
- Nets
- 163
- Pads
- 695
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 5 (file 20171130)
- Created
- 24 Mar 2022
- Updated
- 24 Mar 2022
Overview
CircuitBoards is an open-source printed circuit board by KenKeeley, from the KenKeeley/My68k-System-Old repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 203.2 × 170.2 mm with 21 parts on 163 nets.
README
readme.mdMy Motorola 680x0 home built computer system.

My68k System is a home built Motorola 680x0 based small computer project. It is made in the style of vintage computers of the mid to late 1970's and early 1980's using a mix of classic and modern technologies. The My68k System is made up of a mainboard provding basic input, output, memory and storage functions along with several expansion cards connected via expansion slots that are loosely based on the VME standard although using card edge connectors.
The purpose of the My68k System is to entertain through education. It is intended to be used to teach and promote principles of electronic computer design. It is a solely non-profit educational project and is not intended for any commercial application. The My68k System and related peripherals would be ideal as a small project to teach basic computer hardware and software principles.
SOFTWARE USED
Please report any issues and/or bugs via the "Issues" section on github. If you have any extra reference material then please submit it via the "Issues" section on github.
Parts
21| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | Mounting_Hole_M3 | My68k:Mounting_Hole_M3 | MH1, MH2, MH3, MH4, MH5, MH6, MH7, MH8, MH9, MH10 |
| 4 | Simm72 | My68k:5822021-4 | Sim1, Sim2, Sim3, Sim4 |
| 2 | DIN41612-C-96-F | My68k:DIN41612-C-96-F | Slot1, Slot2 |
| 1 | 178-009-613 | My68k:178-009-613 | J8 |
| 1 | 39-28-1103 | My68k:39-28-1103 | J1 |
| 1 | 5-2301994-2 | My68k:5-2301994-2 | J99 |
| 1 | ATA | My68k:87758-4416 | J29 |
| 1 | DualMiniDin6 | My68k:KMDGX-6S-6S-S4N | J901 |
More from KenKeeley/My68k-System-Old
1- 2 layers165 × 73.3 mm

Similar boards
- 2 layers28.3 × 39.8 mm

LevelShifter
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software
21 parts5.1kGPL-3.0 - 2 layers171.2 × 72.9 mm

Amiga gfxcard before pour
mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog
21 parts1k - 2 layers93.9 × 46 mm

- 2 layers45.5 × 42.9 mm

Esphome han reader
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
21 parts915 - 2 layers31.8 × 14.5 mm

Esp prog
drandyhaas/KiCadRoutingTools
A set of Python/Rust tools to aid routing in KiCad
21 parts744MIT - 2 layers23.5 × 15.8 mm

QuiverAttachPCB
Arrow-air/project-quiver
Project Quiver documentation, designs, and project artifacts.
21 parts617CERN-OHL-S-2.0 - 2 layers69.9 × 41.3 mm

- 2 layers161.3 × 111.8 mm

Questions
How big is the CircuitBoards PCB?
It measures 203.2 × 170.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the CircuitBoards use?
21 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the CircuitBoards KiCad files?
From the KenKeeley/My68k-System-Old repository on GitHub, at the commit this page was made from: the board is CircuitBoards/MainBoard/MainBoard.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the CircuitBoards design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).