Skip to the content
2 layers180 × 110 mmLive pa system, the printed circuit board in 3D

Live pa system

KawaiButa/speaker-diy

A complete, open-hardware engineering design for a DIY Active Stage Monitor Loudspeaker optimized for live vocal and acoustic guitar performance at indoor venues (1–2 m listening distance).

Size
180 × 110 mm
Copper layers
2
Thickness
1.6 mm
Parts
77
Nets
42
Pads
188
Tracks, vias
347, 5
Pours
4
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
15 Oct 2026
Updated
15 Oct 2026

Overview

Live pa system is an open-source printed circuit board by KawaiButa, from the KawaiButa/speaker-diy repository on GitHub. It is a 2-layer board of 180 × 110 mm with 77 parts on 42 nets, routed with 347 tracks and 5 vias.

It is built around the NE5532P, LM317HVT and 47UF/25V, with the IRF4905 among its other parts. Its parts include 26 capacitors, 24 resistors, 7 connectors, 4 ICs and 3 diodes.

Main components

4

README

README.md

DIY Active Stage Monitor Loudspeaker

High-Efficiency, Low-Cost Active Wedge Monitor (Visaton BG 20 + TPA3255 PBTL)

License: MIT KiCad Version SPICE Simulation Budget

A complete, open-hardware engineering design for a DIY Active Stage Monitor Loudspeaker optimized for live vocal and acoustic guitar performance at indoor venues (1–2 m listening distance).

The design combines an ultra-efficient 8-inch full-range transducer with an analog front-end, active excursion protection, a commercial high-efficiency Class-D power amplifier, and a modular home-buildable prototyping architecture.


Key System Specifications

ParameterSpecificationEngineering Details & Rationale
Acoustic TransducerVisaton BG 20 ($8\ \Omega$)8-inch full-range driver with whizzer cone, $92\text{ dB/W/m}$ sensitivity, $f_s = 38\text{ Hz}$.
Linear Excursion Limit$\pm 2.0\text{ mm}$ ($X_{\text{max}}$)Voice coil height $8\text{ mm}$, pole plate $4\text{ mm}$; continuous drive policy strictly capped at 10.0 W RMS to prevent bottoming out.
Continuous SPL Target$\ge 102\text{ dB}$ SPL @ 1 m ($96\text{ dB}$ @ 2 m)Achieved cleanly at 10 W RMS without driver power compression or thermal stress.
Power AmplifierWuzhi ZK-3002 (TPA3255)Preassembled Class-D module configured in Parallel Bridge-Tied Load (PBTL) mono.
External Power Supply$36\text{ V} / 5\text{ A}$ ($180\text{ W}$)Off-the-shelf regulated switch-mode DC adapter; low voltage entry into cabinet for safety.
Reverse Polarity ProtectionIRF4905 P-MOSFET + 12V ZenerForward drop $\le 25\text{ mV}$ ($0.5\text{ W}$ dissipation at 5A); blocks reverse DC up to $-55\text{ V}$ with zero leakage.
Analog Power Rail$+15.0\text{ V}$ DC Linear RegulatedLM317HVT linear regulator ($V_{\text{in}} \le 60\text{ V}$) with diode protection and ripple rejection.
Virtual Ground Rail$+7.50\text{ V}$ Active BufferPrecision $10\text{ k}\Omega$ divider actively buffered by NE5532P op-amp follower.
Microphone PreamplifierGain $+20.0\text{ dB} \sim +50.5\text{ dB}$Balanced difference receiver ($U_{1\text{A}}$) + non-inverting gain stage ($U_{1\text{B}}$), $\ge 50\text{ dB}$ discrete CMRR.
Line Differential ReceiverGain $-9.54\text{ dB}$ ($A_d = 0.333$)Balanced difference receiver ($U_{2\text{B}}$) accepting $+4\text{ dBu}$ nominal with clean $+22\text{ dBu}$ headroom.
Mode SwitchingDPDT Mechanical SelectorMode A: Standalone Vocal (Mic Preamp active).
Mode B: Mixer Monitor (Line In active).
Common Driver Protection60 Hz 2nd-order Sallen-Key HPFButterworth $Q = 0.707$, $-3.0\text{ dB}$ @ $60\text{ Hz}$, $\ge 15.3\text{ dB}$ attenuation at 25 Hz. Protects both Mic and Line paths.
Passive Contour NetworkSwitchable RLC Filter$1.0\text{ mH}$ air choke, $4.7\ \mu\text{F}$ MKP cap, $8.2\ \Omega / 10\text{ W}$ resistor. $-4.5\text{ dB}$ dip @ 1.5–2.5 kHz to tame whizzer cone.
Enclosure25 L Net Stage Wedge15 mm MDF, $45^\circ$ monitor angle, bass-reflex port tuned to $F_b = 50.0\text{ Hz} \pm 2\text{ Hz}$ (PVC tube $60\text{ mm}$ ID $\times 91.2\text{ mm}$).
Total Weight & Budget$< 15\text{ kg}$, $< 5,000,000\text{ VND}$Estimated finished weight: $\approx 11.5\text{ kg}$; estimated total BOM: $\approx 3,725,000\text{ VND}$.

System Architecture

text
                                  +---------------------------------------------+
                                  | 36V 5A External DC Power Adapter (Switching)|
                                  +---------------------------------------------+
                                                         | (DC Barrel Jack J3)
                                                         v
                                  +---------------------------------------------+
                                  | Panel Fuse F1 (5x20mm 4A-T Cartridge)       |
                                  +---------------------------------------------+
                                                         | [18 AWG Red Silicone]
                                                         v
                                  +---------------------------------------------+
                                  | BOARD B: Power Conditioning (5x7 cm)        |
                                  | - Q1: IRF4905 P-FET Reverse Polarity Protect|
                                  | - C17: 470uF/50V Bulk Reservoir Capacitor   |
                                  | - U4: LM317HVT Linear Regulator (+15V Out)  |
                                  | - U3: NE5532P Active Virtual Ground (+7.5V) |
                                  +---------------------------------------------+
                                        |                             |
                   [18 AWG Heavy DC]    |                             | [22 AWG +15V, +7.5V, GND]
                   +36V & Power GND     |                             | Clean Analog Rails
                                        v                             v
+---------------------------------------------+         +---------------------------------------------+
| Wuzhi ZK-3002 (TPA3255 PBTL Mono Amplifier) |         | BOARD A: Analog Audio Front-End (7x9 cm)    |
| - High-current Class-D switching module     |         | - U1: NE5532P (Mic Preamp, Gain +20..+50dB) |

Modular Hardware Implementation

This project is specifically designed to be built at home without custom PCB manufacturing, CNC milling, or chemical etching.

All circuits are partitioned across standard FR-4 double-sided universal prototyping boards ($2.54\text{ mm}$ pitch, isolated tinned pads):

1. Board B — Power Conditioning & +7.5V Bias Reference ($5 \times 7\text{ cm}$)

  • Dimensions: 18 Columns (A–R) $\times$ 24 Rows (1–24).
  • Functions: IRF4905 P-FET reverse-polarity protection, LM317HVT $+15.0\text{ V}$ linear regulator, and NE5532P active buffer producing low-impedance $+7.50\text{ V}$ virtual ground.
  • Assembly Guide: gate-e-board-b-assembly.svg

2. Board A — Audio Analog Front-End ($7 \times 9\text{ cm}$)

  • Dimensions: 26 Columns (A–Z) $\times$ 31 Rows (1–31).
  • Functions:
    • Zone 1 (Left): Balanced Microphone Differential Preamp (U1, XLR J1, RV1 Gain pot, RV2 Volume pot).
    • Zone 2 (Right): Balanced Line Receiver (U2B, Combo J2, RV3 Line pot), Mode Selector Switch (SW1), and Master 60 Hz 2nd-order Sallen-Key HPF (U2A).
  • Assembly Guide: gate-e-board-a-assembly.svg

3. Board C — Passive Speaker Filter ($5 \times 7\text{ cm}$)

  • Dimensions: 18 Columns (A–R) $\times$ 24 Rows (1–24).
  • Functions: Heavy-duty RLC contour notch network ($1.0\text{ mH}$, $4.7\ \mu\text{F}$, $8.2\ \Omega / 10\text{ W}$) with bypass switch (SW2).
  • CRITICAL SAFETY RULE: ZERO ground connections. Both PBTL speaker outputs float at $+18.0\text{ V}$ DC half-supply.
  • Assembly Guide: gate-e-board-c-assembly.svg

Phased Procurement & Verification Plan

Procurement and hardware testing follow a strict 7-stage gated workflow. No downstream components are purchased until the preceding subsystem is tested and confirmed passed:

text
+========================================================================================================================+
| BATCH | SUBSYSTEM DESCRIPTION              | ESTIMATED COST   | CUMULATIVE   | REMAINING BUDGET | GATE STATUS          |
+========================================================================================================================+
| B-0   | Tools & Construction Consumables   |      180,000 VND |  180,000 VND |    4,820,000 VND | READY (ACTIVE)       |
| B-1   | Board B: Power & +7.5V Bias Buffer |      195,000 VND |  375,000 VND |    4,625,000 VND | READY (ACTIVE)       |
| B-2   | Board A (Zone 1): Mic Preamp       |      140,000 VND |  515,000 VND |    4,485,000 VND | BLOCKED (Wait Gate 1)|
| B-3   | Board A (Zone 2): Line Rec & HPF   |      150,000 VND |  665,000 VND |    4,335,000 VND | BLOCKED (Wait Gate 2)|
| B-4   | TPA3255 Amp, 36V PSU & Dummy Load  |      800,000 VND | 1,465,000 VND|    3,535,000 VND | BLOCKED (Wait Gate 3)|
| B-5   | Visaton BG 20 & 25L MDF Enclosure  |    1,860,000 VND | 3,325,000 VND|    1,675,000 VND | BLOCKED (Wait Gate 4)|
| B-6   | Board C: RLC Contour & Finishing   |      400,000 VND | 3,725,000 VND|    1,275,000 VND | BLOCKED (Wait Gate 5)|
+========================================================================================================================+
| TOTAL ESTIMATED PROJECT INVESTMENT: 3,725,000 VND | HARD BUDGET LIMIT: 5,000,000 VND | CONTINGENCY RESERVE: +1,275,000 VND     |
+========================================================================================================================+

For detailed purchasing checklists and Vietnamese search keywords for Shopee/Lazada/Thegioiic, see gate-e-phased-shopping-plan.md.


Project Directory Structure

text
speaker-diy/
├── README.md                                 # Project overview, specifications, and quickstart
├── .gitignore                                # KiCad, Python, and OS ignore patterns
├── projects/
│   └── live-pa-system/                       # Primary active monitor engineering project
│       ├── live-pa-system.kicad_sch          # Authoritative KiCad 10 schematic (42 nets, 73 components)
│       ├── live-pa-system.net                # Exported netlist
│       ├── live-pa-system.cir                # SPICE netlist for ngspice verification
│       ├── live-pa-system.kicad_pro          # KiCad project file
│       ├── gate-d-design-report.md           # Gate D engineering report & simulation audit
│       ├── gate-e-phased-shopping-plan.md    # Phased 7-batch procurement & testing plan
│       ├── gate-e-bench-testing-plan.md      # Detailed bench testing, thermal & acoustic test plan
│       ├── gate-e-protoboard-wiring.md       # Master hole-by-hole point-to-point wiring schedule
│       ├── gate-e-board-a-assembly.svg       # Scaled assembly diagram: Board A (Audio Front-End)
│       ├── gate-e-board-b-assembly.svg       # Scaled assembly diagram: Board B (Power & Bias Buffer)
│       ├── gate-e-board-c-assembly.svg       # Scaled assembly diagram: Board C (Passive RLC Filter)
│       ├── gate-e-system-wiring-diagram.svg  # Overall system interconnect wiring diagram
│       └── simulation/                       # ngspice dedicated testbenches and simulation logs
└── .agents/                                  # Specialized electronics and speaker design agent skills

Critical Safety & Bring-Up Rules

[!CAUTION]

  1. Current-Limited Power-Up: Never connect newly assembled prototype boards directly to an unrestricted battery or power supply. Use a bench supply with current limit set to $100\text{ mA}$, or insert a $100\ \Omega / 10\text{ W}$ power resistor in series with the $+36\text{ V}$ adapter lead during initial bring-up to clamp short-circuit fault current to $\le 360\text{ mA}$.
  2. Floating PBTL Speaker Bridge Outputs: The Wuzhi ZK-3002 / TPA3255 PBTL output operates as an active H-bridge. Both output terminals float at $+18.0\text{ V}$ DC half-supply. Never connect either speaker output to signal ground, chassis ground, or an oscilloscope ground clip!
  3. LM317HVT Heatsink Tab Isolation: The TO-220 metal mounting tab of U4 is internally connected to Pin 2 (Output, $+15\text{ V}$), NOT ground! The heatsink must remain electrically floating with $\ge 3\text{ mm}$ clearance from adjacent components and chassis ground.
  4. 18 AWG Direct Power Wiring: 36V 5A DC power and speaker audio lines must never run over thin perfboard copper foil. Use direct, insulated 18 AWG stranded silicone wire.

License

This project is licensed under the MIT License — hardware schematics, wiring schedules, and documentation are provided openly for DIY audio enthusiasts and educational purposes.

Parts

77
QtyValueFootprintReferences
6100kR_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR1, R2, R12, R13, R18, R24
6100nF/50VC_Rect_L7.2mm_W2.5mm_P5.00mm_FKS2_FKP2_MKS2_MKP2C3, C16, C18, C21, C25, C26
610uF/25VCP_Radial_D5.0mm_P2.00mmC6, C7, C14, C15, C19, C22
447pFC_Disc_D4.3mm_W1.9mm_P5.00mmC1, C2, C10, C11
4MountingHole_3.2mm_M3MountingHole_3.2mm_M3H1, H2, H3, H4
3NE5532PDIP-8_W7.62mmU1, U2, U3
210k_0.1%R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR16, R17
210k_1%R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR21, R22
210uF/50V_BPCP_Radial_D6.3mm_P2.50mmC4, C5
21N4007D_DO-41_SOD81_P10.16mm_HorizontalD2, D3
21uF_FilmC_Rect_L7.2mm_W3.5mm_P5.00mm_FKS2_FKP2_MKS2_MKP2C12, C13
22.2k_0.1%R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR3, R5
230k_0.1%R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR14, R15
24.7k_0.1%R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR4, R6
268nF_FilmC_Rect_L7.2mm_W3.5mm_P5.00mm_FKS2_FKP2_MKS2_MKP2C8, C9
11.0mH_AirCore_0.35RL_Radial_D27.9mm_P19.05mm_Vishay_IHB-3L1
11.2k_1%R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR10
1100uF/25VCP_Radial_D6.3mm_P2.50mmC20
110k_Log_LINE_VOLPotentiometer_Bourns_3386P_VerticalRV3
110k_Log_MIC_VOLPotentiometer_Bourns_3386P_VerticalRV2
12.64k_1%R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR20
1240R_1%R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR19
127k_1%R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR9
1330R_1%R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR8
14.7uF/250V_MKPC_Rect_L18.0mm_W9.0mm_P15.00mm_FKS3_FKP3C24
1470uF/50V_LowESRCP_Radial_D10.0mm_P5.00mmC17
147k_1%R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR7
147uF/25VCP_Radial_D5.0mm_P2.00mmC23
150k_RevLog_MIC_GAINPotentiometer_Bourns_3386P_VerticalRV1
156k_1%R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR11
18.2R_10W_NonInductiveR_Axial_Power_L25.0mm_W9.0mm_P30.48mmR23
1AMP_AUDIO_INPinHeader_1x03_P2.54mm_VerticalJ5
1AMP_POWER_36VTerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_HorizontalJ4
1AMP_SPEAKER_OUTTerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_HorizontalJ6
1BZX79C12_12VD_DO-35_SOD27_P7.62mm_HorizontalD1
1COMBO_LINE_INJack_XLR-6.35mm_Neutrik_NCJ6FI-H_HorizontalJ2
1CONTOUR_BYPASSSW_DIP_SPSTx01_Slide_6.7x4.1mm_W7.62mm_P2.54mm_LowProfileSW2
1DC_36V_INBarrelJack_HorizontalJ3
1DPDT_MODE_SELECTSW_CK_JS202011CQN_DPDT_StraightSW1
1IRF4905TO-220-3_VerticalQ1
1LM317HVTTO-220-3_VerticalU4
1MIC_XLR_INJack_XLR_Neutrik_NC3FAH_HorizontalJ1
1T3.15A_250V_5x20mmFuseholder_Cylinder-5x20mm_Schurter_0031_8201_Horizontal_OpenF1
1TP_MODE_STATUSTestPoint_Pad_D1.5mmTP1
1VISATON_BG20_8RTerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_HorizontalJ7

Similar boards

  • 2 layers128 × 80 mmModularLabPSU, the printed circuit board in 3D

    ModularLabPSU

    tom-biskupic/LabPSU

    Open Source Lab Power Supply

    146 parts33
  • 2 layers160 × 100 mmRegenerativeRadioPowerSupply, the printed circuit board in 3D

    RegenerativeRadioPowerSupply

    cbaurtx/TubeRadio

    To get the calculted inductance of 20µH the input tank coil we need this air coil:

    35 parts
  • 2 layers108.7 × 79.2 mmDriveramp, the printed circuit board in 3D

    Driveramp

    psu-meteo/SuperDARN_Transmitter

    86 partsMIT
  • 4 layers163 × 174.4 mmGd rev3b, the printed circuit board in 3D

    Gd rev3b

    baldengineer/Mega-IIe

    Using the Mega II from a IIgs to make a Apple IIe compatible computer: The Mega IIe!

    440 parts33MIT
  • 2 layers190 × 75 mmQ17-TURBO, the printed circuit board in 3D

    Q17-TURBO

    stefaweb/Q17-Amplifier

    The Q17 is an error correction HIFI amplifier based on the QUAD405 current dumping principle.

    109 parts25GPL-3.0

Questions

How big is the Live pa system PCB?

It measures 180 × 110 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Live pa system use?

77 parts, built around the NE5532P, LM317HVT, 47UF/25V and IRF4905. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Live pa system KiCad files?

From the KawaiButa/speaker-diy repository on GitHub, at the commit this page was made from: the board is projects/live-pa-system/backup_20261015_pre_perfboard_redesign/live-pa-system.kicad_pcb and its schematic projects/live-pa-system/backup_20261014_gated_preaudit/live-pa-system.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Live pa system design in my own project?

Its repository states no licence, so its author keeps all rights: ask KawaiButa before reusing the design.