
MCL68
MicroCoreLabs/Projects
Ted Fried's MicroCore Labs Projects - FPGA CPU cores and emulators for the 8088, 8086, 8051, 6502, 68000, Z80, Risc-V, and also Typewriter and EPROM Emulator projects.

Intensity servo is an open-source printed circuit board by KaizhaoWang, from the KaizhaoWang/Intensity_servo repository on GitHub. It is a 4-layer board of 160 × 99.5 mm with 13 parts on 64 nets, routed with 20 tracks and 78 vias.
It is built around the 35SVPD47M and 4701-001MLF. Its parts include 4 capacitors and 1 connector. It belongs with the robots and motor control boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 0.1 uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C4 |
| 2 | 47 uF | Passives:SMD_can_10.3x10.3mm | C1, C2 |
| 2 | ~ | Passives:CTS_4701_PiFilter_3Term_10.0x2.29mm | FL1, FL2 |
| 1 | GND star point | NetTie:NetTie-2_SMD_Pad2.0mm | NT1 |
| 1 | MountingHole1 | MountingHole:MountingHole_2.7mm_M2.5_DIN965 | H1 |
| 1 | MountingHole2 | MountingHole:MountingHole_2.7mm_M2.5_DIN965 | H2 |
| 1 | TP_+15V | TestPoint:TestPoint_Pad_2.0x2.0mm | TP1 |
| 1 | TP_-15V | TestPoint:TestPoint_Pad_2.0x2.0mm | TP3 |
| 1 | TP_GND | TestPoint:TestPoint_Pad_2.0x2.0mm | TP2 |
| 1 | ~ | Connectors:DIN64 | J1 |

MicroCoreLabs/Projects
Ted Fried's MicroCore Labs Projects - FPGA CPU cores and emulators for the 8088, 8086, 8051, 6502, 68000, Z80, Risc-V, and also Typewriter and EPROM Emulator projects.

AzonInc/Doorman
ESP32-S3 based Intercom Gateway (TCS / Koch / Niko / Scantron / Analogue Systems)

loxodes/vna
Under development open hardware microwave vector network analyzer


Protocentral/healthypi-move-hw
Hardware files for the HealthyPi Move


felixheld/qspimux
QSPI flash multiplexer - connect a SPI NOR flash to either an embedded system or a programmer for remote firmware tests

Unified-Daughterboard/UDB-C-EZM
For more details on the Unified Daughterboard project, see the main website.
It measures 160 × 99.5 mm and has 4 copper layers, 1.6 mm thick.
13 parts, built around the 35SVPD47M and 4701-001MLF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the KaizhaoWang/Intensity_servo repository on GitHub, at the commit this page was made from: the board is Intensity_servo.kicad_pcb and its schematic Application.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask KaizhaoWang before reusing the design.