

PitotBoard2026
PitotBoard2026
- Size
- 59.2 × 40.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 79
- Nets
- 77
- Pads
- 261
- Tracks, vias
- 422, 84
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 9 Oct 2025
- Updated
- 27 May 2026
Overview
PitotBoard2026 is an open-source printed circuit board by KUBTSSAvionics, from the KUBTSSAvionics/PitotBoard2026 repository on GitHub. It is a 2-layer board of 59.2 × 40.2 mm with 79 parts on 77 nets, routed with 422 tracks and 84 vias.
It is built around the ATMEGA328PB-AU, M78AR05-0.5 and BME280, with the FXMA2102L8X, SDP32 and TPS76133SF5 among its other parts. Its parts include 24 capacitors, 13 resistors, 9 ICs, 6 connectors and 4 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
7ATMEGA328PB-AU
TQFP-32(7x7)-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 27 2KB 32KB 8 Bit AVR Built-in FLASH Power-on reset (POR)、Undervoltage detection (BOR/LVD/LVR/LVI)、Watchdog reset、External pin reset (NRST)、Built-in general-purpose timer、Programmable watchdog、Touch function TQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)M78AR05-0.5
SIP,11.5x7.6mm-40℃~+85℃ -5V、5V 1 10.2mm 11.5mm 200uA 20mVp-p 300mA、500mA 330uF、680uF 6.5V~36V、7V~31V 7.55mm 80%、81%、84%、90% 850kHz Plastic encapsulated type Short Circuit Protection、Automatic fault recovery ±2% SIP,11.5x7.6mm DC-DC Power Modules ROHSYLPTECDC-DC Power ModulesBME280
LGA-8(2.5x2.5)-40℃~+85℃ 0%RH~100%RH 1.71V~3.6V 1.8uA 16bit I2C、SPI ±0.5℃ ±3%RH LGA-8(2.5x2.5) Temperature and Humidity Sensor ROHSBoschTemperature And Humidity SensorFXMA2102L8X
SMD-40℃~+85℃ 1 1.65V~5.5V 1.65V~5.5V 2 Bidirectional Tri-State、Open-drain SMD Translators, Level Shifters ROHSonsemiTranslators, Level ShiftersSDP32
QFN-16_8.5X5.5mmQFN-16_8.5X5.5mm New Arrivals ROHSSensirionUncategorisedTPS76133SF5
SOT-23-5L-40℃~+125℃ 1 150mA 16V 3.3V Fixed Over Current Protection、Thermal shutdown、Enable control、Reverse polarity voltage protection Positive SOT-23-5L Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSHTC Korea TAEJIN TechUncategorisedRB160M-30
SOD-1231A 30A 30V 480mV@1A 50uA Standalone SOD-123 Schottky Diodes ROHShongjiachengSchottky Diodes
README
README.mdPitotBoard2026
PitotBoard2026
Parts
79| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | , , , , , , , , , | ||
| 9 | 1u | Capacitor_SMD:C_0603_1608Metric | C2, C5, C6, C7, C9, C15, C17, C19, C21 |
| 8 | 0.1u | Capacitor_SMD:C_0603_1608Metric | C1, C4, C14, C16, C18, C20, C22, C24 |
| 6 | 4.7k | Resistor_SMD:R_0603_1608Metric | R11, R12, R20, R21, R22, R23 |
| 3 | 10u | Capacitor_SMD:C_0603_1608Metric | C3, C8, C23 |
| 3 | 4.7u | Capacitor_SMD:C_0603_1608Metric | C10, C11, C12 |
| 3 | RB160M | Diode_SMD:D_SOD-123 | D1, D2, D6 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric | R1, R18 |
| 2 | 16MHz | Crystal:Resonator_SMD_Murata_CSTxExxV-3Pin_3.0x1.1mm | Y1, Y3 |
| 2 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Horizontal | J4, J6 |
| 2 | Conn_01x04_Socket | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J3, J5 |
| 2 | SLIP | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U4, U7 |
| 1 | 10 | Resistor_SMD:R_0603_1608Metric | R13 |
| 1 | 100 | Resistor_SMD:R_0603_1608Metric | R14 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric | R17 |
| 1 | 100n | Capacitor_SMD:C_0603_1608Metric | C27 |
| 1 | 10uH | Inductor_SMD:L_Changjiang_FTC322512S | L1 |
| 1 | 120 | Resistor_SMD:R_0603_1608Metric | R9 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric | R10 |
| 1 | ATmega328PB-A | Package_QFP:TQFP-32_7x7mm_P0.8mm | U1 |
| 1 | BME280 | KUBTSS:BME280 | U9 |
| 1 | ERR | LED_SMD:LED_0603_1608Metric | D5 |
| 1 | FXMA2102 | Package_DIP:DIP-8_W7.62mm | U11 |
| 1 | FerriteBead_Small | Inductor_SMD:L_0603_1608Metric | FB1 |
| 1 | ICSP | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J2 |
| 1 | LOGO | KUBTSS:Lba | G*** |
| 1 | LOGO | KUBTSS:CYGNUS | G*** |
| 1 | M78AR05-0.5 | KUBTSS:SIP3_11.6x8.5mm | U2 |
| 1 | MCP25625-x-SS | Package_SO:SSOP-28_5.3x10.2mm_P0.65mm | U10 |
| 1 | RJ25 | Connector_RJ:RJ25_Wayconn_MJEA-660X1_Horizontal | J1 |
| 1 | RST | Button_Switch_SMD:SW_SPST_PTS810 | SW1 |
| 1 | SDP32 | KUBTSS:SDP32 | U3 |
| 1 | TPS76133SF5 | Package_TO_SOT_SMD:SOT-23-5 | U5 |
The 73 most common of 79 parts.
Similar boards
- 2 layers72.1 × 47.9 mm

- 4 layers199.8 × 150 mm

- 6 layers143.4 × 126.2 mm

Esl gsu
tiancilliers/esl-gsu
Satellite interfacing kit in development by the ESL (Electronic Systems Lab)
741 parts - 2 layers184.1 × 175.3 mm

- 2 layers85 × 35 mm

- 2 layers72 × 48 mm

- 2 layers100 × 70 mm

- 2 layers74.1 × 66.5 mm

SHVC SOUND ESP32
SHIMA-R7/SHVC-SOUND-Player
Arduino Uno R3 / Nano (ATmega328P・5Vロジック) で SHVC-SOUND(スーファミ音源モジュール: S-SMP + S-DSP + ARAM + DAC)を駆動し、 .spc ファイルを実チップで再生するプロジェクト。音声は TDA7053A(ステレオBTL)で増幅し3.5mmジャックへ出力する。
33 parts
Questions
How big is the PitotBoard2026 PCB?
It measures 59.2 × 40.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PitotBoard2026 use?
79 parts, built around the ATMEGA328PB-AU, M78AR05-0.5, BME280 and FXMA2102L8X. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PitotBoard2026 KiCad files?
From the KUBTSSAvionics/PitotBoard2026 repository on GitHub, at the commit this page was made from: the board is PitotBoard2026/PitotBoard2026.kicad_pcb and its schematic PitotBoard2026/PitotBoard2026.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the PitotBoard2026 design in my own project?
Its repository states no licence, so its author keeps all rights: ask KUBTSSAvionics before reusing the design.