

Esp32 cnc shield
- Size
- 101.6 × 64.8 mm
- Copper layers
- 2
- Thickness
- 2.04 mm
- Parts
- 20
- Nets
- 64
- Pads
- 138
- Tracks, vias
- 150, 7
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 18 Aug 2022
- Updated
- 20 Aug 2022
Overview
Esp32 cnc shield is an open-source printed circuit board by KGrzeg, from the KGrzeg/esp32_cnc repository on GitHub, published under the MIT licence. It is a 2-layer board of 101.6 × 64.8 mm with 20 parts on 64 nets, routed with 150 tracks and 7 vias.
Its parts include 11 connectors, 3 capacitors, 1 IC and 1 diode. It belongs with the robots and motor control boards and the ESP32 boards of this library.
Parts
20| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 100u | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C1, C2, C3 |
| 1 | Configuration | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J7 |
| 1 | DOIT-ESP32-DEVKIT-V1 | doit-esp32-devkit-kicad:ESP32-DOIT-DEVKIT | U1 |
| 1 | D_Small_Filled | Diode_THT:D_DO-15_P10.16mm_Horizontal | D1 |
| 1 | External Power | TerminalBlock:TerminalBlock_Altech_AK300-2_P5.00mm | J4 |
| 1 | Future Shottky | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J11 |
| 1 | LOGO | pretty:alpaca-pica | G*** |
| 1 | UART | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | USB C | usbc:USB_C_Cursed | J1 |
| 1 | X Axis | Module:Pololu_Breakout-16_15.2x20.3mm | A1 |
| 1 | X Engine | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J5 |
| 1 | X Mode | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J3 |
| 1 | Y Axis | Module:Pololu_Breakout-16_15.2x20.3mm | A2 |
| 1 | Y Engine | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J8 |
| 1 | Y Mode | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J6 |
| 1 | Z Axis | Module:Pololu_Breakout-16_15.2x20.3mm | A3 |
| 1 | Z Engine | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J10 |
| 1 | Z Mode | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J9 |
Similar boards
- 2 layers66.9 × 74.5 mm

- 2 layers86.4 × 64.8 mm

- 2 layers36.2 × 26.8 mm

Esp32 minimal
atopile/atopile
Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️
20 parts4kMIT - 2 layers108.1 × 393.8 mm

Sweep compact ble
davidphilipbarr/Sweep
Sweep - a small promicro based keyboard inspired by the Ferris.
20 parts2.1k - 2 layers26 × 15.9 mm

TPS54340 Buck Regulator
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
20 parts1.2k - 2 layers67.6 × 30.5 mm

Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
20 parts1kGPL-3.0 - 2 layers44.3 × 28.7 mm

Lin bus adapter esp32
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
20 parts915 - 2 layers89.5 × 61.6 mm

FreeDeck TH 2020-02
FreeYourStream/freedeck-hardware
all the stuff you need to build your own FreeDeck
20 parts772
Questions
How big is the Esp32 cnc shield PCB?
It measures 101.6 × 64.8 mm and has 2 copper layers, 2.04 mm thick.
What parts does the Esp32 cnc shield use?
20 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Esp32 cnc shield KiCad files?
From the KGrzeg/esp32_cnc repository on GitHub, at the commit this page was made from: the board is esp32_cnc_shield.kicad_pcb and its schematic esp32_cnc_shield.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Esp32 cnc shield design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).