

Altium files for the ramp generator PCB
- Size
- 152.4 × 101.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 43
- Nets
- 123
- Pads
- 238
- Tracks, vias
- 85, 0
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 7 Jun 2023
- Updated
- 30 Oct 2024
Overview
Legacy is an open-source printed circuit board by KGAtomTrapLab, from the KGAtomTrapLab/ramp_gen_pcb repository on GitHub. It is a 2-layer board of 152.4 × 101.6 mm with 43 parts on 123 nets, routed with 85 tracks and 0 vias.
It is built around the MCP4921-E/P, OPA452TA-1 and C3216JB1A106M160AA, with the KTR18EZPJ102 among its other parts. Its parts include 18 connectors, 16 capacitors, 4 resistors and 4 ICs.
Main components
4MCP4921-E/P
PDIP-8-40℃~+125℃ 1 12 12LSB 2.7V~5.5V 4.5us Integrated buffer、Power-on reset、Power-down mode、Programmable gain SPI Voltage Buffer PDIP-8 Digital to Analog Converters (DAC) ROHSMicrochip TechnologyDigital To Analog Converters (DAC)OPA452TA-1
TO-220-7-40V~-10V、10V~40V -40℃~+125℃ 1 1.8MHz 100pA 1mV 21nV/√Hz@1kHz 5.5mA 50mA 5uV/℃ 7.2V/us 7pA 94dB Overvoltage Protection TO-220-7 Operational Amplifier ROHSTexas InstrumentsOperational AmplifierC3216JB1A106M160AA
120610V 10uF ±20% 1206 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSTDKMultilayer Ceramic Capacitors MLCC - SMD/SMTKTR18EZPJ102
1206-55℃~+155℃ 1kΩ 250mW 500V Thick Film Resistor ±200ppm/℃ ±5% 1206 Chip Resistor - Surface Mount ROHSROHM SemiconductorChip Resistor - Surface Mount
README
README.mdramp_gen_pcb
-PCB Files used for creating our custom voltage ramp electronics.
-Originally devloped ini Altium, migrated to KiCad
-Additionaliy contains various documentation for componenents
Parts
43| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | C3216JB1A106M160AA | RampGenModels:FP-C3216-160-0_2-IPC_C | C1, C1, C2, C2, C7, C7, C8, C8 |
| 8 | CAP 100pF 100V 1206(3216) | RampGenModels:CAPC1206(3216)100_N | C3, C3, C4, C4, C5, C5, C6, C6 |
| 6 | 1-1337445-0 | RampGenModels:FP-1-1337445-0-MFG | J4, J4, J6, J6, J7, J7 |
| 6 | 24.243.1 | RampGenModels:FP-24_243_1-MFG | J5, J5, J8, J8, J9, J9 |
| 4 | 5015 | RampGenModels:FP-5015-MFG | J1, J1, J2, J2 |
| 4 | KTR18EZPJ102 | RampGenModels:FP-KTR18-IPC_A | R1, R1, R2, R2 |
| 2 | 61301221121 | RampGenModels:61301221121 | J3, J3 |
| 2 | MCP4921-E/P | RampGenModels:PDIP300-P8 | U2, U2 |
| 2 | OPA452TA-1 | RampGenModels:KVT0007A | U1, U1 |
| 1 | Arduino_Due_Shield | PCM_arduino-library:Arduino_Due_Shield | A1 |
More from KGAtomTrapLab/ramp_gen_pcb
1- 2 layers129.5 × 114.3 mm

Similar boards
- 2 layers149.3 × 104.5 mm

Sequencer
michd/modular-synth
Building a hardware modular synthesizer, this is where I'll collect module schematics and hardware designs.
132 parts20 - 2 layers100 × 100 mm

MCTheremin
profdc9/MCTheremin
Microcontroller based theremin using the STM32F103C8T6 bluepill board
99 parts11 - 2 layers163.6 × 33.2 mm

CompactBeamspringP2
purdeaandrei/CompactBeamSpring
Compact Beamspring Controller, based on the TH Xwhatsit design
68 parts8 - 2 layers158.4 × 41.7 mm

SMDModelF
purdeaandrei/SMDModelFController
Model F controller, supports F AT, F122, F Unsaver, and "Blue Switch" keyboards.
45 parts6 - 2 layers68.6 × 53.3 mm

- 2 layers151 × 118 mm

- 2 layers167.3 × 85.2 mm

FinalCircuit
HarshitRaj3007/EDL2024
Repository for our EDL project in year 2024. RRAM Characterization using FPGA.
59 parts1 - 2 layers205.7 × 109.9 mm

CarteAdaptatrice
IOGS-LEnsE-ressources/aberrations-gui
You can Download or Clone this repository.
48 parts1
Questions
How big is the Legacy PCB?
It measures 152.4 × 101.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Legacy use?
43 parts, built around the MCP4921-E/P, OPA452TA-1, C3216JB1A106M160AA and KTR18EZPJ102. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Legacy KiCad files?
From the KGAtomTrapLab/ramp_gen_pcb repository on GitHub, at the commit this page was made from: the board is pcb/Legacy.kicad_pcb and its schematic pcb/V2_rampGen.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Legacy design in my own project?
Its repository states no licence, so its author keeps all rights: ask KGAtomTrapLab before reusing the design.