
Encoder
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

The main pcb is an open-source printed circuit board by K18192jz, from the K18192jz/pid_formation_led repository on GitHub. It is a 2-layer board of 71.3 × 55.9 mm with 7 parts on 31 nets, routed with 34 tracks and 0 vias.
Its parts include 3 resistors, 2 diodes, 1 IC and 1 connector. It belongs with the ESP32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | LED | LED_THT:LED_D1.8mm_W3.3mm_H2.4mm | D1, D2 |
| 1 | 10K | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R3 |
| 1 | 330 | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R1 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | R_Photo | LED_THT:LED_D1.8mm_W3.3mm_H2.4mm | R2 |
| 1 | esp32 | esp32_footprint:Untitled | U1 |

byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.



AxxAxx/AxxSolder
STM32 Based soldering station for JBC cartridges, 9-24 VDC and USB-PD power


jamro/tiny-engineer
A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

It measures 71.3 × 55.9 mm and has 2 copper layers, 1.6 mm thick.
7 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the K18192jz/pid_formation_led repository on GitHub, at the commit this page was made from: the board is the_main_pcb/the_main_pcb.kicad_pcb and its schematic the_main_pcb/the_main_pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask K18192jz before reusing the design.