
Carico elettronico
dario0603/electronic_load
Un progetto open-source per la progettazione e simulazione di un Carico Elettronico Bipolare (Electronic Load), ideato per il test e la caratterizzazione di alimentatori, batterie e circuiti di potenza.

The PCB for the ice cutter project
Ice cutter is an open-source printed circuit board by JustinPead, from the JustinPead/ice_cutter_pcb repository on GitHub. It is a 4-layer board of 90 × 100 mm with 199 parts on 106 nets, routed with 1,138 tracks and 498 vias.
It is built around the LM358, SHT30-DIS and TM1620, with the FJ4301AH and S8550 among its other parts. Its parts include 71 resistors, 31 capacitors, 25 transistors, 11 ICs and 8 connectors. It belongs with the STM32 boards of this library.
The PCB for the ice cutter project
This is a component for the greater project of an automated Ice cutting rig
The PCB is responsible for providing the power, receiving the power setting (potentiometer) and providing information on the current status (7 Seg and LEDS) It has an onboard temperature sensor to determine the initial conditions for the ice rig.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 34 | TestPoint | TestPoint:TestPoint_Pad_D2.0mm | TP1, TP2, TP10, TP11, TP12, TP13, TP14, TP15, TP16, TP17, TP18, TP19, TP20, TP21, TP22, TP23 +18 |
| 17 | 4k7 | Resistor_SMD:R_0402_1005Metric | R1, R2, R10, R12, R16, R25, R27, R44, R45, R50, R51, R52, R53, R57, R58, R65 +1 |
| 16 | 0R | Resistor_SMD:R_0402_1005Metric | R30, R31, R32, R33, R34, R35, R36, R37, R38, R39, R40, R41, R42, R43, R48, R49 |
| 15 | 100n | Capacitor_SMD:C_0402_1005Metric | C1, C2, C3, C9, C10, C11, C14, C15, C17, C19, C20, C21, C22, C23, C29 |
| 10 | 100R | Resistor_SMD:R_0402_1005Metric | R6, R13, R22, R54, R59, R60, R61, R62, R63, R64 |
| 10 | 10u | Capacitor_SMD:C_0603_1608Metric | C6, C7, C8, C16, C18, C24, C25, C26, C27, C28 |
| 8 | Q_PMOS_GSD | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3, Q19, Q20, Q21, Q22, Q25 |
| 7 | S8050_SMD | Package_TO_SOT_SMD:SOT-23 | Q8, Q9, Q10, Q16, Q17, Q18, Q23 |
| 6 | 100R | Resistor_SMD:R_1206_3216Metric | R17, R67, R68, R69, R70, R71 |
| 6 | 1k5 | Resistor_SMD:R_0402_1005Metric | R19, R20, R21, R23, R28, R55 |
| 6 | 3.3M | Resistor_SMD:R_0402_1005Metric | R4, R8, R14, R24, R26, R56 |
| 6 | Jumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP2, JP3, JP4, JP5, JP6 |
| 4 | 5554 | Diode_SMD:D_SMA | D5, D8, D9, D10 |
| 4 | Q_NMOS_GSD | Package_TO_SOT_SMD:SOT-23 | Q5, Q12, Q13, Q14 |
| 3 | INA219AxD | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U3, U5, U12 |
| 3 | Q_NMOS_GSD | Package_TO_SOT_SMD:TO-252-2 | Q7, Q11, Q24 |
| 3 | S8550 | Package_TO_SOT_SMD:SOT-23 | Q4, Q6, Q15 |
| 3 | SW_Push | Button_Switch_SMD:SW_SPST_TL3342 | SW1, SW2, SW3 |
| 2 | 1.5F | MyLibs:SP-5R5-Z155VY | C12, C13 |
| 2 | 100u | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C30, C31 |
| 2 | 12mR | Resistor_SMD:R_2512_6332Metric | R3, R11 |
| 2 | 220R | Resistor_SMD:R_0402_1005Metric | R5, R7 |
| 2 | 330R | Resistor_SMD:R_0402_1005Metric | R9, R18 |
| 2 | 4.7m | Capacitor_THT:CP_Radial_D14.0mm_P5.00mm | C4, C5 |
| 2 | Conn_01x01_Male | MyLibs:SMD_Pad_15x10 | J1, J4 |
| 2 | DNP | Resistor_SMD:R_0402_1005Metric | R46, R47 |
| 2 | FJ4301AH | UCT:7_Seg_x3 | U6, U7 |
| 2 | Motor_Servo | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | M1, M2 |
| 1 | 0R1 | Resistor_SMD:R_1206_3216Metric | R29 |
| 1 | 10k | UCT:RK09_THT_Pot_C209770 | RV1 |
| 1 | 1R | Resistor_SMD:R_2512_6332Metric | R15 |
| 1 | 5819 | Diode_SMD:D_SOD-123 | D1 |
| 1 | Barrel_Jack | UCT:Barrel_Jack_2A_C84007 | J2 |
| 1 | Green | Diode_SMD:D_0603_1608Metric | D4 |
| 1 | LM317_TO-252 | Package_TO_SOT_SMD:TO-252-2 | U2 |
| 1 | LM358 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | Red | Diode_SMD:D_0603_1608Metric | D3 |
| 1 | SHT30-DIS | Sensor_Humidity:Sensirion_DFN-8-1EP_2.5x2.5mm_P0.5mm_EP1.1x1.7mm | U9 |
| 1 | STM32G030XX | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U8 |
| 1 | TM1620 | Package_SO:SOP-20_7.5x12.8mm_P1.27mm | U11 |
| 1 | TMP117 | Package_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm | U10 |
| 1 | UART | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J8 |
| 1 | hands | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J7 |
| 1 | pot | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | program | MyLibs:TC2030NL | J5 |
| 1 | program2 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J6 |

dario0603/electronic_load
Un progetto open-source per la progettazione e simulazione di un Carico Elettronico Bipolare (Electronic Load), ideato per il test e la caratterizzazione di alimentatori, batterie e circuiti di potenza.



aws/iot-expresslink
This device was designed and created for the AWS IoT ExpressLink Demo Badge Workshop, which was run at re:Invent 2022.

aws-samples/aws-iot-connected-product-demo-badge
This device was designed and created for a hands-on workshop at re:Invent 2023.

baldengineer/BaldSENSE_Sensor_Feather_Wing
A temperature, humidity, light, and sound sensor wing

polesskiy-dev/iot-risk-data-logger-nfc-samd21-hardware
Hardware (schematics, PCB, BOM) for iot-risk-data-logger-nfc-samd21 project

christopher-besch/mold_detect
Warn residents of mold-friendly atmosphere and log opened windows.
It measures 90 × 100 mm and has 4 copper layers, 1.77 mm thick.
199 parts, built around the LM358, SHT30-DIS, TM1620 and FJ4301AH. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the JustinPead/ice_cutter_pcb repository on GitHub, at the commit this page was made from: the board is ice_cutter.kicad_pcb and its schematic FET_Drive_sch.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask JustinPead before reusing the design.