
Type e
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

Breakout board that stacks on-top of a Raspberry Pi 4, exposing 4x I2C connectors and a button to manage startup/shutdown
Pi4-breakout is an open-source printed circuit board by JustinOng, from the JustinOng/pi4-breakout repository on GitHub. It is a 2-layer board of 65 × 56 mm with 16 parts on 33 nets, routed with 44 tracks and 1 via.
Its parts include 6 connectors, 3 resistors, 1 diode and 1 switch. It belongs with the interfaces and adapters boards of this library.
Hat template from xesscorp/RPi_Hat_Template.

GPIO3 (I2C_SCL) is connected to a button because grounding it will boot up the Pi after a shutdown (see WAKE_ON_GPIO)GPIO17 is another arbitrary pin configured to shutdown the Pi when grounded (dtoverlay=gpio-shutdown,gpio_pin=17 in /boot/config.txt)SCL is pulled low as part of I2C operation. There has been some anecdotal evidence here. Perhaps the deboucing on the shutdown overlay prevents it from triggering?GPIO5 has an LED connected to it - configuring cron to set this pin HIGH on boot essentially makes this an indicator for whether the Pi is powered on (note that this pin turns off before the Pi is fully off - a Raspberry Pi 4B has been observed to still be blinking its ACT LED when GPIO5 turns off). Probably a good idea to wait for the ACT LED to stop blinking before cutting power.| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | RPi_Hat:RPi_Hat_Mounting_Hole | , , , | |
| 2 | DNP | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | I2C_0 | Connector_Molex:Molex_KK-254_AE-6410-04A_1x04_P2.54mm_Vertical | J2 |
| 1 | I2C_1 | Connector_Molex:Molex_KK-254_AE-6410-04A_1x04_P2.54mm_Vertical | J3 |
| 1 | I2C_2 | Connector_Molex:Molex_KK-254_AE-6410-04A_1x04_P2.54mm_Vertical | J4 |
| 1 | I2C_3 | Connector_Molex:Molex_KK-254_AE-6410-04A_1x04_P2.54mm_Vertical | J5 |
| 1 | LED_ALT | Diode_SMD:D_0603_1608Metric | D1 |
| 1 | Power | Button_Switch_THT:SW_PUSH_6mm | SW1 |
| 1 | Power | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | JP1 |
| 1 | Raspberry_Pi | RPi_Hat:Pin_Header_Straight_2x20 | J1 |
| 1 | UART | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J6 |

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

conorpp/u2f-zero
U2F USB token optimized for physical security, affordability, and style

rusefi/rusefi
rusefi - GPL internal combustion engine control unit

VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!


It measures 65 × 56 mm and has 2 copper layers, 1.6 mm thick.
16 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the JustinOng/pi4-breakout repository on GitHub, at the commit this page was made from: the board is pi4-breakout.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask JustinOng before reusing the design.