2 layers190 × 110 mm
2 layers40.6 × 36.8 mm
KTYSimulator
JuergenMH/SaunaControlUnitControl unit for sauna oven. Ensures comfort and safety.
- Size
- 40.6 × 36.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 21
- Nets
- 17
- Pads
- 47
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 24 Jan 2026
- Updated
- 22 Mar 2026
Overview
KTYSimulator is an open-source printed circuit board by JuergenMH, from the JuergenMH/SaunaControlUnit repository on GitHub. It is a 2-layer board of 40.6 × 36.8 mm with 21 parts on 17 nets.
Its parts include 15 resistors and 1 connector.
README
README.mdSaunaControlUnit
Control unit for sauna oven. Ensures comfort and safety. Cheap control units are good for regualation and some basic safetey functions. This project is designed to add some comfort and safety topics
- Enhanced safety by control internal power lines and oven function
- Enhanced comfort: Acceess via WLAN
- Two relay banks to ensure the system in case of one relay fails
Folders: Components: Datasheets and information hardware component related Documents: Planning Documents SaunaPCB: KiCAD folder for schematic and PCB design files Simulation: Folder for LTSpice simulation fils Firmware: Planned for firmware files, currently empty
Sorry, some documents are available in German only ;-)
Parts
21| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 100 | Potentiometer_THT:Potentiometer_Bourns_3005_Horizontal | R103, R106, R109, R112 |
| 4 | 150 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R102, R105, R108, R114 |
| 2 | 1K5 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R101, R113 |
| 1 | 1K8 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R104 |
| 1 | 2K | Potentiometer_THT:Potentiometer_Alps_RK09Y11_Single_Horizontal | R115 |
| 1 | 2K2 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R107 |
| 1 | 3K3 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R110 |
| 1 | 47 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R111 |
| 1 | Conn_01x02_Socket | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J101 |
| 1 | JP_0-100°C | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP105 |
| 1 | JP_0°C | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP101 |
| 1 | JP_100°C | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP104 |
| 1 | JP_25°C | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP102 |
| 1 | JP_50°C | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP103 |
More from JuergenMH/SaunaControlUnit
1Similar boards
- 2 layers28.3 × 39.8 mm
LevelShifter
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software
21 parts5.1kGPL-3.0 - 2 layers171.2 × 72.9 mm
Amiga gfxcard before pour
mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog
21 parts1k - 2 layers93.9 × 46 mm
- 2 layers45.5 × 42.9 mm
Esphome han reader
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
21 parts915 - 2 layers31.8 × 14.5 mm
Esp prog
drandyhaas/KiCadRoutingTools
A set of Python/Rust tools to aid routing in KiCad
21 parts744MIT - 2 layers23.5 × 15.8 mm
QuiverAttachPCB
Arrow-air/project-quiver
Project Quiver documentation, designs, and project artifacts.
21 parts617CERN-OHL-S-2.0 - 2 layers69.9 × 41.3 mm
- 2 layers161.3 × 111.8 mm
Questions
How big is the KTYSimulator PCB?
It measures 40.6 × 36.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the KTYSimulator use?
21 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the KTYSimulator KiCad files?
From the JuergenMH/SaunaControlUnit repository on GitHub, at the commit this page was made from: the board is KTYSimulator/KTYSimulator.kicad_pcb and its schematic KTYSimulator/KTYSimulator.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the KTYSimulator design in my own project?
Its repository states no licence, so its author keeps all rights: ask JuergenMH before reusing the design.