

Driver UI vehicle system LEDLighting
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 10
- Nets
- 193
- Pads
- 208
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 6 Jan 2026
- Updated
- 6 Jan 2026
Overview
Driver UI vehicle system LEDLighting is an open-source printed circuit board by Jsnchg, from the Jsnchg/Driver-UI-vehicle-system-LEDLighting repository on GitHub. It is a 2-layer board with 10 parts on 193 nets.
It is built around the MPQ3362GJ-AEC1-Z and EC2-3NU. Its parts include 9 ICs and 1 switch.
Main components
2MPQ3362GJ-AEC1-Z
TSOT-23-8-40℃~+125℃ 1 200kHz~2.2MHz 36V 3V~36V 4A Analog、PWM Boost Built-in DC-DC Under Voltage Protection、Over Voltage Protection、Over Current Protection、Over-Temperature Protection (OTP) TSOT-23-8 LED Drivers ROHSMonolithic Power SystemsLED DriversEC2-3NU
DIP,15x7.5mm-40℃~+85℃ 140mW 1ms 220V@DC、250V@AC 2A 2ms 300mA@110VDC、500mA@125VAC、2A@30VDC 3V 64.3Ω 75mΩ Silver Alloy Two groups of conversions: 2C(Double-pole double-throw conversion) DIP,15x7.5mm Signal Relays ROHSKEMETSignal Relays
README
README.mdDriver-UI-vehicle-system-LEDLighting
Parts
10| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MPQ3362GJ-AEC1 | Package_TO_SOT_SMD:TSOT-23-8 | U8, U9, U23, U24 |
| 3 | 8080 | Package_DIP:DIP-40_W15.24mm | U3, U13, U25 |
| 2 | LED1642GWPTR | Package_SO:QSOP-24_3.9x8.7mm_P0.635mm | U27, U28 |
| 1 | EC2-3NU | Relay_THT:Relay_DPDT_Kemet_EC2_NU | K1 |
Similar boards
- 4 layers100 × 84 mm

- 2 layers96 × 92 mm

Roller shutter controller
swanseahackspace/roller-shutter-controller
RFID interface board for Eurodrive Eurokit-3 roller shutter controllers or similar, based on Lolin C3 Mini
36 partsGPL-3.0 - 4 layers100 × 49.9 mm

N2adr
softerhardware/Hermes-Lite2
A second generation low-cost amateur HF software defined radio transceiver.
166 parts384 - 2 layers25.4 × 25.4 mm

- 4 layers150 × 100 mm

- 2 layers57 × 55.2 mm

LogicAnalyzer
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software
10 parts5.1kGPL-3.0 - 2 layers32.2 × 15.4 mm

Protector
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.
10 parts4.3kMIT - 2 layers14.4 × 10.1 mm

Q3Q SWAB A1-00 Temperature + Test Points + OPT3001
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch
10 parts2.1k
Questions
What parts does the Driver UI vehicle system LEDLighting use?
10 parts, built around the MPQ3362GJ-AEC1-Z and EC2-3NU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Driver UI vehicle system LEDLighting KiCad files?
From the Jsnchg/Driver-UI-vehicle-system-LEDLighting repository on GitHub, at the commit this page was made from: the board is Driver-UI-vehicle-system-LEDLighting.kicad_pcb and its schematic Driver-UI-vehicle-system-LEDLighting.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Driver UI vehicle system LEDLighting design in my own project?
Its repository states no licence, so its author keeps all rights: ask Jsnchg before reusing the design.