

ControllerPCB
- Size
- 61 × 44 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 47
- Nets
- 51
- Pads
- 142
- Tracks, vias
- 222, 25
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 28 Aug 2026
- Updated
- 28 Aug 2026
Overview
ControllerPCB is an open-source printed circuit board by Josh-Craythorne, from the Josh-Craythorne/LFR_KiCad repository on GitHub. It is a 2-layer board of 61 × 44 mm with 47 parts on 51 nets, routed with 222 tracks and 25 vias.
It is built around the ATMEGA4808-AF, JS202011CQN and MJTP1230. Its parts include 11 capacitors, 10 connectors, 6 resistors, 4 ICs and 3 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
3ATMEGA4808-AF
TQFP-32(7x7)-40℃~+125℃ 1.8V~5.5V 10bit 20MHz 256Byte 27 48KB 6KB 8 Bit AVR Built-in FLASH Power-on reset (POR)、Undervoltage detection (BOR/LVD/LVR/LVI)、Built-in general-purpose timer、Hardware CRC、Window watchdog (WWDG) TQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)JS202011CQN
插件-40℃~+85℃ 3.3mm 300mA 5,000 cycles 5.5mm 6V 9mm Black DPDT PC Pin Rectangular Columnar Through Hole 插件 Slide Switches ROHSC&KSlide SwitchesMJTP1230
插件-20℃~+70℃ 1.6N 100,000 cycles 12V 50mA PC Pin Round Button SPST Through Hole 插件 Tactile Switches ROHSAPEMTactile Switches
Parts
47| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | C | Capacitor_SMD:C_0805_2012Metric | C1, C2, C3, C7, C9, C11, C12 |
| 6 | TestPoint | TestPoint:TestPoint_Pad_1.5x1.5mm | TP1, TP2, TP3, TP4, TP5, TP6 |
| 5 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1, J2, J3, J4, J5 |
| 5 | R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R3, R4, R5, R6 |
| 3 | MountingHole | MountingHole:MountingHole_2.5mm | H1, H2, H3 |
| 3 | SB130 | footprint_library:SB130-T | D1, D2, D3 |
| 2 | 100nF | Capacitor_SMD:C_0805_2012Metric | C6, C8 |
| 2 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J8, J9 |
| 2 | MCP1700x-330xxTO | footprint_library:TO127P254X495-3 | U2, U5 |
| 2 | Q_NMOS_GSD | Package_TO_SOT_SMD:SOT-23_Handsoldering | Q1, Q2 |
| 1 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
| 1 | 10uF | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C5 |
| 1 | ATmega4808-A | Package_QFP:TQFP-32_7x7mm_P0.8mm | U1 |
| 1 | AVR-UPDI-6 | Connector_IDC:IDC-Header_2x03_P2.54mm_Vertical | J7 |
| 1 | BATTERYIN | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J6 |
| 1 | C_Polarized | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C4 |
| 1 | Conn_02x05_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | J10 |
| 1 | GND | TestPoint:TestPoint_Bridge_Pitch2.54mm_Drill1.0mm | TP7 |
| 1 | JS202011CQN | footprint_library:SWITCH_011CQN | U4 |
| 1 | MJTP1230 | footprint_library:MJTP1230 | S1 |
More from Josh-Craythorne/LFR_KiCad
1- 2 layers14.5 × 35.8 mm

Similar boards
- 2 layers70.5 × 90 mm

- 4 layers65.5 × 39 mm

- 2 layers89.9 × 17.8 mm

BivalveBit
millerlp/BivalveBit_hardware
Heart rate and valve gape sensor wearable for oysters and mussels
58 partsGPL-3.0 - 2 layers79.5 × 66 mm

- 2 layers100.1 × 78.2 mm

- 2 layers88 × 56 mm

Line follower atmega4808-sensor array
juleswwebb/portfolio
A static engineering portfolio for https://juleswwebb.github.io/portfolio/.
45 parts - 4 layers243.8 × 171.5 mm

- 4 layers80 × 35 mm

Questions
How big is the ControllerPCB PCB?
It measures 61 × 44 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ControllerPCB use?
47 parts, built around the ATMEGA4808-AF, JS202011CQN and MJTP1230. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ControllerPCB KiCad files?
From the Josh-Craythorne/LFR_KiCad repository on GitHub, at the commit this page was made from: the board is PCB/LFR FINAL DESIGN MAIN BOARD/ControllerPCB.kicad_pcb and its schematic PCB/LFR FINAL DESIGN MAIN BOARD/ControllerPCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ControllerPCB design in my own project?
Its repository states no licence, so its author keeps all rights: ask Josh-Craythorne before reusing the design.