
ProgrammerTiny
JosephBrooksbank/CapacitiveLedFadeTiny
Controller for capacitive led modules for a table. Each module is powered by an ATTiny3224, with global control of color over i2c from an Arduino

Controller for capacitive led modules for a table. Each module is powered by an ATTiny3224, with global control of color over i2c from an Arduino
CapacitiveLedFadeTiny is an open-source printed circuit board by JosephBrooksbank, from the JosephBrooksbank/CapacitiveLedFadeTiny repository on GitHub. It is a 2-layer board of 29.8 × 17.4 mm with 17 parts on 16 nets, routed with 151 tracks and 11 vias.
It is built around the ATTINY3224-XF. Its parts include 2 capacitors, 2 diodes, 2 connectors and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | ~ | CapacitiveLedFadeLibrary:SK6805-EC15 | LED1, LED2 |
| 1 | 0.1uf | Capacitor_SMD:C_0402_1005Metric | C3 |
| 1 | 1uf | Capacitor_SMD:C_0603_1608Metric | C4 |
| 1 | ATtiny3224-X | Package_SO:TSSOP-14_4.4x5mm_P0.65mm | U1 |
| 1 | Antenna | CapacitiveLedFadeLibrary:CapacitiveAntenna | J1 |
| 1 | Bus In | digikey-footprints:CONN_BM04B-PASS-1-TFTLFSN_JST | BusIn1 |
| 1 | Bus Out | digikey-footprints:CONN_BM04B-PASS-1-TFTLFSN_JST | BusOut1 |
| 1 | GND | Library:TestPoint_Pad_1.5mm_circular | GND |
| 1 | LEDs | digikey-footprints:BM03B-PASS-1-TFT | LED |
| 1 | PadRX | Library:TestPoint_Pad_1.5mm_circular | RX |
| 1 | PadTX | Library:TestPoint_Pad_1.5mm_circular | TX |
| 1 | PadUPDI | Library:TestPoint_Pad_1.5mm_circular | UPDI |
| 1 | Power Inject | Library:2Pad | J6 |
| 1 | SCLK | Library:TestPoint_Pad_1.5mm_circular | SCLK |
| 1 | SDA | Library:TestPoint_Pad_1.5mm_circular | SDA |
| 1 | VCC | Library:TestPoint_Pad_1.5mm_circular | VCC |

JosephBrooksbank/CapacitiveLedFadeTiny
Controller for capacitive led modules for a table. Each module is powered by an ATTiny3224, with global control of color over i2c from an Arduino

jackwangxyw/QRP-RF-Power-and-SWR-Meter
Compact SWR and power meter for field use




hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI


hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

DDeGonge/OS-ARM
This arm is not industrial and it will not be fast, but that is not my goal. But it will hopefully be a very nice looking arm fully capable of 6dof motion, cheap enough to keep it accessable but capable enough to…
It measures 29.8 × 17.4 mm and has 2 copper layers, 1.6 mm thick.
17 parts, built around the ATTINY3224-XF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the JosephBrooksbank/CapacitiveLedFadeTiny repository on GitHub, at the commit this page was made from: the board is PCB/CapacitiveLedFadeTiny/CapacitiveLedFadeTiny.kicad_pcb and its schematic PCB/CapacitiveLedFadeTiny/CapacitiveLedFadeTiny.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask JosephBrooksbank before reusing the design.