2 layers44.5 × 46.9 mm
OSO SWAT B1-jig
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch
31 parts2.1k
2 layers19.1 × 39.4 mm
Ltc4332 breakout
JordanAceto/ltc4332_breakout1Small breakout board for LTC4332 SPI extender chip
- Size
- 19.1 × 39.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 31
- Nets
- 17
- Pads
- 65
- Tracks, vias
- 150, 13
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 23 Jun 2022
- Updated
- 16 Jul 2022
Overview
Ltc4332 breakout is an open-source printed circuit board by JordanAceto, from the JordanAceto/ltc4332_breakout repository on GitHub, published under the CC-BY-4.0 licence. It is a 2-layer board of 19.1 × 39.4 mm with 31 parts on 17 nets, routed with 150 tracks and 13 vias.
Its parts include 6 resistors, 2 capacitors, 2 connectors, 1 IC and 1 diode. It belongs with the interfaces and adapters boards of this library.
README
README.mdLTC4332 SPI Extender Breakout
Schematic
index.html contains easy to navigate documentation and fabrication files.
Parts
31| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 620 | Resistor_SMD:R_0805_2012Metric | R2, R4, R5 |
| 2 | 10k | Resistor_SMD:R_0805_2012Metric | R1, R6 |
| 2 | G*** | kibuzzard-62B219C1 | kibuzzard-62B219C1, kibuzzard-62B219C1 |
| 1 | 110 | Resistor_SMD:R_0805_2012Metric | R3 |
| 1 | 1u | Capacitor_SMD:C_0805_2012Metric | C2 |
| 1 | 4u7 | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | Conn_01x06 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J2 |
| 1 | Conn_01x10 | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J1 |
| 1 | G*** | kibuzzard-62B229F4 | kibuzzard-62B229F4 |
| 1 | G*** | kibuzzard-62B229E7 | kibuzzard-62B229E7 |
| 1 | G*** | kibuzzard-62B22951 | kibuzzard-62B22951 |
| 1 | G*** | kibuzzard-62B22A9B | kibuzzard-62B22A9B |
| 1 | G*** | kibuzzard-62B3749B | kibuzzard-62B3749B |
| 1 | G*** | kibuzzard-62B2297F | kibuzzard-62B2297F |
| 1 | G*** | kibuzzard-62B22ADB | kibuzzard-62B22ADB |
| 1 | G*** | kibuzzard-62B229AC | kibuzzard-62B229AC |
| 1 | G*** | kibuzzard-62B229D7 | kibuzzard-62B229D7 |
| 1 | G*** | kibuzzard-62B22ACD | kibuzzard-62B22ACD |
| 1 | G*** | kibuzzard-62B229C0 | kibuzzard-62B229C0 |
| 1 | G*** | kibuzzard-62B22AB2 | kibuzzard-62B22AB2 |
| 1 | G*** | kibuzzard-62B227D5 | kibuzzard-62B227D5 |
| 1 | G*** | kibuzzard-62B2249D | kibuzzard-62B2249D |
| 1 | LED | LED_SMD:LED_0805_2012Metric | D1 |
| 1 | LTC4332 | Package_DFN_QFN:QFN-20-1EP_4x5mm_P0.5mm_EP2.65x3.65mm | U1 |
| 1 | remote | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1 |
The 29 most common of 31 parts.
Similar boards
- 2 layers65 × 30 mm
Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
31 parts1kGPL-3.0 - 2 layers191 × 98.5 mm
MacroKeypad
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
31 parts915 - 2 layers39 × 45.2 mm
CH32V003F4P6-R0-1v1
openwch/ch32v003
CH32V003 is an ultra-cheap RISC-V MCU with 2KB SRAM, 16KB flash, and up to 18 GPIOs that sells for under $0.10
31 parts599 - 2 layers26.7 × 27.9 mm
Breakout board
Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
31 parts546MIT - 2 layers100 × 50 mm
Pixelix
BlueAndi/Pixelix
Full RGB LED matrix, based on an ESP32 and WS2812B LEDs or emulated LEDs on TFT.
31 parts447MIT - 2 layers77.2 × 69.8 mm
- 2 layers103 × 55 mm
Questions
How big is the Ltc4332 breakout PCB?
It measures 19.1 × 39.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Ltc4332 breakout use?
31 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Ltc4332 breakout KiCad files?
From the JordanAceto/ltc4332_breakout repository on GitHub, at the commit this page was made from: the board is kicad_6/ltc4332_breakout.kicad_pcb and its schematic kicad_6/ltc4332_breakout.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Ltc4332 breakout design in my own project?
Its repository publishes it under the CC-BY-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).