
Flosspods pro flex
kenp-io/not-for-airpods-repairs
The content of this repository is licensed under the WTFPL License. Please have a close look at the terms before using this material.

Small pcb for evaluating the LM3886 audio power amplifier chip
Lm3886 stereo amp is an open-source printed circuit board by JordanAceto, from the JordanAceto/LM3886_power_amp_pcb repository on GitHub, published under the CC-BY-4.0 licence. It is a 2-layer board of 53.3 × 30.5 mm with 22 parts on 15 nets, routed with 64 tracks and 0 vias.
It is built around the LM3886T. Its parts include 11 capacitors, 7 resistors, 3 connectors and 1 IC. It belongs with the audio and music boards of this library.

| Revision | schematic | pcb layout | built and tested | documentation |
|---|---|---|---|---|
| 1 | ☑ | ☑ | ☑ | ☑ |
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 20k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1, R4, R5, R6 |
| 2 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C10, C11 |
| 2 | 100uF | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C6, C7 |
| 2 | 10uF | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C8, C9 |
| 2 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R2, R3 |
| 1 | 1uF | Capacitor_THT:C_Rect_L7.0mm_W3.5mm_P5.00mm | C1 |
| 1 | 220nF | Capacitor_THT:C_Rect_L7.0mm_W3.5mm_P5.00mm | C5 |
| 1 | 47uF | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C3 |
| 1 | 4R7 | Resistor_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P15.24mm_Horizontal | R7 |
| 1 | 4n7 | Capacitor_THT:C_Rect_L7.0mm_W2.5mm_P5.00mm | C2 |
| 1 | 50pF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C4 |
| 1 | LM3886 | Package_TO_SOT_THT:TO-220-11_P3.4x5.08mm_StaggerOdd_Lead4.85mm_Vertical | U1 |
| 1 | power_in | Connector_Wire:SolderWirePad_1x03_P4.445mm_Drill1.5mm | J3 |
| 1 | signal_in | Connector_Wire:SolderWirePad_1x02_P3.81mm_Drill1.2mm | J1 |
| 1 | speaker_out | Connector_Wire:SolderWirePad_1x02_P5.08mm_Drill1.5mm | J2 |

kenp-io/not-for-airpods-repairs
The content of this repository is licensed under the WTFPL License. Please have a close look at the terms before using this material.

barchstien/network-amp
PCB including DAC, audio amp, RaspberryPi interface and power supply


wonzaj/Amplituner
Audio amplituner with display, bass, middle, treble control. It has:


duanestorey/hifi-amp
A high-fidelity four-channel amplifier with active-crossovers and room correction

apxco/Kicad
Zum Testen von einigen Transistorschaltungen für Verstärker. Noch nicht fertig.

It measures 53.3 × 30.5 mm and has 2 copper layers, 1.6 mm thick.
22 parts, built around the LM3886T. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the JordanAceto/LM3886_power_amp_pcb repository on GitHub, at the commit this page was made from: the board is kicad_docs/lm3886_stereo_amp.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CC-BY-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).