

DCMGv2wBUFFERS
kicad files for a DC microgrid hardware model
- Size
- 354.3 × 253 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 548
- Nets
- 389
- Pads
- 1,701
- Tracks, vias
- 3,995, 150
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 3
- Created
- 29 Feb 2016
- Updated
- 12 Apr 2016
Overview
DCMGv2wBUFFERS is an open-source printed circuit board by Jordan87M, from the Jordan87M/DCMG repository on GitHub. It is a 2-layer board of 354.3 × 253 mm with 548 parts on 389 nets, routed with 3,995 tracks and 150 vias.
It is built around the PQMC3-D24-D15-S, LT1013DD and LT1014DN, with the ULN2803A and PDS1040 among its other parts. Its parts include 172 resistors, 145 connectors, 84 capacitors, 75 switches and 36 ICs.
Main components
5PQMC3-D24-D15-S
-Power Supply Module,Power SuppliesCUILT1013DD
SOIC-8-15V~15V 0.4V/us 0℃~+70℃ 15nA 1MHz 2 200pA 200uV 350uA 5V 700nV/℃ 97dB Reverse-phase input protection SOIC-8 Precision Op Amps ROHSTexas InstrumentsOperational AmplifierLT1014DN
PDIP-140.4V/us 0℃~+70℃ 117dB 150pA 200uV 22nV/√Hz@1kHz 30nA 4 700nV/℃ Reverse-phase input protection PDIP-14 Precision Op Amps ROHSTexas InstrumentsOperational AmplifierULN2803A
SOP-18-300mil-40℃~+85℃ 0.93mA 100uA 15pF 20uA 30V 500mA 50V 8 SOP-18-300mil Darlington Transistor Arrays ROHSUMWDarlington Transistor ArraysPDS1040
Power-DI-51 Independent 10A 275A 40V 510mV@10A 700uA@40V Power-DI-5 Schottky Diodes ROHSDiodes IncorporatedSchottky Diodes
Parts
548| Qty | Value | Footprint | References |
|---|---|---|---|
| 48 | VCC_BYP | c_0603 | C2, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24 +32 |
| 32 | SPDT_RELAY | TECONN_ORWH | SW2, SW3, SW10, SW12, SW13, SW16, SW18, SW22, SW24, SW26, SW27, SW32, SW33, SW37, SW38, SW39 +16 |
| 22 | CTRL_SIG | SIL-1 | P12, P15, P20, P21, P32, P34, P49, P51, P60, P61, P72, P112, P114, P121, P122, P135 +6 |
| 22 | C_SNUB | c_0805 | C54, C55, C56, C57, C58, C59, C60, C61, C62, C63, C64, C65, C66, C67, C68, C69 +6 |
| 22 | NC_SCGR_SIG | SIL-1 | P18, P19, P27, P28, P39, P41, P54, P55, P100, P102, P105, P117, P118, P127, P128, P137 +6 |
| 22 | NO_SCGR | TECONN_ORWH | SW4, SW5, SW14, SW15, SW20, SW21, SW30, SW31, SW35, SW41, SW42, SW43, SW49, SW51, SW52, SW57 +6 |
| 22 | NO_SCGR_SIG | SIL-1 | P14, P17, P33, P38, P42, P43, P50, P53, P101, P104, P106, P113, P116, P129, P130, P136 +6 |
| 22 | R_SNUB | c_1206 | R138, R139, R140, R141, R142, R143, R144, R145, R146, R147, R148, R149, R150, R151, R152, R153 +6 |
| 18 | LOAD_I_SIG | SIL-1 | P13, P16, P31, P35, P44, P45, P48, P52, P76, P79, P107, P108, P111, P115, P140, P141 +2 |
| 18 | LT1013 | so-8 | U19, U20, U21, U22, U23, U24, U25, U26, U27, U28, U29, U30, U31, U32, U33, U34 +2 |
| 17 | LED | 1209 | D1, D2, D3, D4, D5, D6, D7, D8, D10, D11, D12, D13, D14, D15, D16, D17 +1 |
| 17 | R | c_0603 | R27, R28, R32, R33, R37, R38, R40, R41, R85, R86, R87, R88, R97, R100, R101, R160 +1 |
| 14 | IS_R1 | c_0603 | R12, R17, R24, R31, R46, R51, R73, R78, R89, R96, R107, R112, R167, R171 |
| 14 | IS_R2 | c_0603 | R14, R15, R26, R29, R48, R49, R75, R76, R91, R94, R109, R110, R165, R169 |
| 14 | IS_R3 | c_0603 | R10, R11, R22, R23, R44, R45, R71, R72, R83, R84, R105, R106, R168, R172 |
| 14 | IS_R4 | c_0603 | R13, R16, R25, R30, R47, R50, R74, R77, R90, R95, R108, R111, R166, R170 |
| 13 | CLIM | c_0603 | R6, R20, R21, R42, R43, R54, R55, R81, R82, R103, R104, R115, R116 |
| 12 | LOAD_CONN+ | DELTRON BANANA | P22, P23, P46, P47, P56, P57, P85, P86, P109, P110, P119, P120 |
| 12 | LOAD_CONN- | DELTRON BANANA | P24, P25, P26, P29, P30, P36, P87, P89, P90, P91, P92, P98 |
| 12 | L_SEN | OHMITE_1W | R18, R19, R36, R39, R52, R53, R79, R80, R99, R102, R113, R114 |
| 12 | NC_SCGR | TECONN_ORWH | SW7, SW11, SW17, SW19, SW23, SW25, SW45, SW47, SW54, SW56, SW60, SW64 |
| 10 | ULN2803A | SOIC-18 | U2, U3, U4, U7, U8, U9, U11, U13, U14, U16 |
| 9 | GF_REL | TECONN_ORWH | SW1, SW28, SW29, SW34, SW36, SW67, SW70, SW72, SW74 |
| 9 | GF_SIG | SIL-1 | P11, P62, P63, P70, P71, P125, P126, P133, P134 |
| 9 | GND_FLT | Double Terminal 8191 | R7, R58, R59, R68, R69, R119, R120, R129, R131 |
| 9 | SRC_CONN+ | DELTRON BANANA | P4, P6, P8, P58, P59, P123, P124, P144, P145 |
| 9 | SRC_CONN- | DELTRON BANANA | P5, P7, P9, P37, P40, P99, P103, P142, P143 |
| 9 | VAL** | 3mm_hole | 3mm_hole, 3mm_hole, 3mm_hole, 3mm_hole, 3mm_hole, 3mm_hole, 3mm_hole, 3mm_hole, 3mm_hole |
| 8 | COIL_BYPASS | c_0603 | C44, C45, C46, C47, C48, C49, C50, C51 |
| 6 | FUSE | OMNI-BLOCK | F1, F2, F3, F4, F5, F6 |
| 6 | I_SEN | OHMITE_1W | R132, R133, R134, R135, R163, R164 |
| 6 | LT1014DN | SO16W | U1, U5, U6, U10, U12, U15 |
| 5 | BUS_V_SIG | SIL-1 | P10, P66, P67, P131, P132 |
| 5 | VS_R1 | c_0603 | R3, R62, R65, R123, R126 |
| 5 | VS_R2 | c_0603 | R1, R61, R63, R122, R124 |
| 5 | VS_R3 | c_0603 | R4, R66, R67, R127, R128 |
| 5 | VS_R4 | c_0603 | R2, R60, R64, R121, R125 |
| 4 | C_LIM | c_0603 | R56, R57, R117, R118 |
| 3 | 100u | PANASONIC_CAP_D8 | C52, C53, C77 |
| 3 | 4.7u | SDR1005 | L1, L2, L3 |
| 2 | 1k | c_0805 | R161, R162 |
| 2 | MINLOAD_S | c_1206 | R136, R137 |
| 1 | 10u | c_2917 | C43 |
| 1 | 1u | c_1206 | C1 |
| 1 | 1u | c_0603 | C76 |
| 1 | 24V_IN | Screw Terminal 8191 | P1 |
| 1 | BR1_L1 | Double Terminal 8191 | R9 |
| 1 | BR1_L2 | Double Terminal 8191 | R35 |
| 1 | BR1_L3 | Double Terminal 8191 | R93 |
| 1 | BR2_L1 | Double Terminal 8191 | R8 |
| 1 | BR2_L2 | Double Terminal 8191 | R34 |
| 1 | BR2_L3 | Double Terminal 8191 | R92 |
| 1 | COIL_OUT | Screw Terminal 8191 | P139 |
| 1 | GND_IN | Screw Terminal 8191 | P3 |
| 1 | IC+OUT | Screw Terminal 8191 | P2 |
| 1 | IC-OUT | Screw Terminal 8191 | P138 |
| 1 | PDS1040 | POWERDI5 | D18 |
| 1 | PQMC3-D24-D15 | SIL-8 PQMC | U17 |
| 1 | R | Double Terminal 8191 | R5 |
| 1 | RECOM_R-7XXX | R-7xxx_SIL-12 | U18 |
| 1 | TIE1 | Double Terminal 8191 | R70 |
| 1 | TIE2 | Double Terminal 8191 | R130 |
More from Jordan87M/DCMG
3- 2 layers

- 2 layers271.3 × 163.1 mm

- 2 layers253 × 74.2 mm

Similar boards
- 2 layers49.5 × 42.5 mm

Hp ref
cellularmitosis/hp-03458-66509-clone
A clone of the LTZ1000 reference board from the HP 3458A 8.5-digit multimeter
46 parts12MIT - 2 layers48.9 × 45.7 mm

- 2 layers79.9 × 49.9 mm

- 2 layers50 × 40 mm

- 2 layers79.9 × 50 mm

- 2 layers50.2 × 44.5 mm

- 4 layers32 × 80 mm

- 2 layers145 × 60.3 mm

Mkulima hardware
Kazenzi/The-robotic-farmer
Click the Youtube Thumbnail below for a youtube demo video:
147 parts1MIT
Questions
How big is the DCMGv2wBUFFERS PCB?
It measures 354.3 × 253 mm and has 2 copper layers, 1.6 mm thick.
What parts does the DCMGv2wBUFFERS use?
548 parts, built around the PQMC3-D24-D15-S, LT1013DD, LT1014DN and ULN2803A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the DCMGv2wBUFFERS KiCad files?
From the Jordan87M/DCMG repository on GitHub, at the commit this page was made from: the board is DCMGv2wBUFFERS.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the DCMGv2wBUFFERS design in my own project?
Its repository states no licence, so its author keeps all rights: ask Jordan87M before reusing the design.