2 layers74.5 × 56.3 mm
PowerBook
BlueSCSI/BlueSCSI-v2
BlueSCSI v2/Ultra - an open source, open hardware, SCSI emulator using the Pi Pico PR2040 and Pico 2 RP2350
83 parts459GPL-3.0
2 layers104 × 77 mm
Grove Monitor V1.1
JoelEB/Grove_Monitoring_System2Controlling the Grove motherboard over I2C
- Size
- 104 × 77 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 83
- Nets
- 40
- Pads
- 345
- Tracks, vias
- 684, 242
- Pours
- 11
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 5 Nov 2018
- Updated
- 22 Nov 2019
Overview
Grove Monitor V1.1 is an open-source printed circuit board by JoelEB, from the JoelEB/Grove_Monitoring_System repository on GitHub. It is a 2-layer board of 104 × 77 mm with 83 parts on 40 nets, routed with 684 tracks and 242 vias.
Its parts include 27 capacitors, 21 resistors, 14 connectors and 4 ICs.
README
README.mdGrove_Monitoring_System
Controlling the Grove motherboard over I2C
Parts
83| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C2, C5, C6, C8, C11, C12, C14, C17, C18, C22, C24, C26 |
| 12 | 10uF | Capacitor_SMD:C_0603_1608Metric | C1, C3, C4, C7, C9, C10, C13, C15, C16, C21, C23, C25 |
| 6 | 4.7K | Resistor_SMD:R_0603_1608Metric | R5, R6, R9, R10, R19, R20 |
| 5 | ATLAS_STAMP | Openponics_Devices:ATLAS_STAMP_EZO | STP1, STP2, STP3, STP4, STP401 |
| 4 | 10k | Resistor_SMD:R_0603_1608Metric | R14, R15, R17, R18 |
| 4 | BNC | Openponics_Devices:WL-EB08040502_snk | P1, P2, P3, P401 |
| 4 | STAND-OFF | Openponics_Hardware:STAND-OFF_LARGE | H1, H2, H3, H4 |
| 3 | 10K | Resistor_SMD:R_0603_1608Metric | R4, R8, R12 |
| 3 | 16.9K | Resistor_SMD:R_0603_1608Metric | R3, R7, R11 |
| 3 | 4.7K | Resistors:0603 | R1, R2, R21 |
| 3 | ADM3260 | Package_SO:SSOP-20_5.3x7.2mm_P0.65mm | U2, U3, U4 |
| 2 | 100 | Resistor_SMD:R_0603_1608Metric | R13, R16 |
| 2 | 10uF | Capacitors:CPOL-RADIAL-2.5MM-5MM | C19, C20 |
| 2 | AUDIO_JACK_3.5MM_SMD | Connectors:AUDIO-JACK-3.5MM-SMD | J1, J2 |
| 2 | Conn_01x01 | Connectors:1X01 | J9, J10 |
| 2 | Conn_01x03 | Connectors:SCREWTERMINAL-3.5MM-3 | J5, J7 |
| 2 | QWIIC | Openponics_Connectors:Qwiic_Connector | J3, J4 |
| 2 | STAND-OFF | MeowWolf_Hardware:STAND-OFF | H5, H6 |
| 1 | 470µF | Capacitors:PANASONIC_D | C101 |
| 1 | Conn_01x02 | Connectors:SCREWTERMINAL-3.5MM-2 | J8 |
| 1 | Conn_01x05 | Connectors:1X05_LONGPADS | J6 |
| 1 | OPENPONICS_LOGO | Openponics_Logos:Openponics_Logo_Horizontal_16mm | LOGO2 |
| 1 | OPENPONICS_LOGO | Openponics_Logos:Openponics_Logo_Plain_45mm | LOGO1 |
| 1 | OPENPONICS_LOGO | Openponics_Logos:Openponics_Logo_Horizontal_3_inch | LOGO3 |
| 1 | PARTICLE_MESH | Openponics_Templates:Particle_Mesh | U1 |
| 1 | PARTICLE_PHOTON | Boards:PARTICLE_PHOTON | JP1 |
| 1 | RASPBERRY_PI_2 | Openponics_Templates:RasPi-40pin_Connector | PI_BOARD101 |
| 1 | VAL** | Openponics_Hardware:RAS_PI_MOUNTING_HOLES | PI_Board |
Similar boards
- 2 layers170.7 × 64.1 mm
- 2 layers144 × 80 mm
DVDLaserScanner
GaudiLabs/OpenLaserScanningMicroscope
Open Source Laser Scanning Microscope
83 parts345GPL-3.0 - 2 layers58 × 58 mm
- 2 layers147.9 × 104.8 mm
- 2 layers121.9 × 128.3 mm
Plinkyblackfront bigholes
plinkysynth/plinky_public
a public release of the plinky sw and hw
83 parts227 - 2 layers186 × 36 mm
AddOnB
freeDSP/freeDSP-aurora
freeDSP ADAU1452 with 8 analog input, 8 analog outputs, S/P-DIF I/O, ADAT I/O, USB Audio Class2, WiFi, Bluetooth
83 parts226CC-BY-SA-4.0 - 2 layers53 × 53 mm
Hair electrolysis machine
zoemaestra/hair-electrolysis-machine-usb-c
A fork of scd31's hair electrolysis machine but with USB-C and optimised for cheaper assembly with JLCPCB
83 parts168CERN-OHL-P-2.0
Questions
How big is the Grove Monitor V1.1 PCB?
It measures 104 × 77 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Grove Monitor V1.1 use?
83 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Grove Monitor V1.1 KiCad files?
From the JoelEB/Grove_Monitoring_System repository on GitHub, at the commit this page was made from: the board is Hardware/V1.1/Grove_Monitor_V1.1.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Grove Monitor V1.1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask JoelEB before reusing the design.