Skip to the content
2 layers295.5 × 295.3 mmSolder, the printed circuit board in 3D

PCB created for Hack Club Solder

Size
295.5 × 295.3 mm
Copper layers
2
Thickness
1.6 mm
Parts
13
Nets
8
Pads
48
Tracks, vias
118, 5
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
5 May 2025
Updated
5 May 2025

Overview

Solder is an open-source printed circuit board by JoelBiswas, from the JoelBiswas/MasterSwordPCB repository on GitHub. It is a 2-layer board of 295.5 × 295.3 mm with 13 parts on 8 nets, routed with 118 tracks and 5 vias.

Its parts include 5 resistors, 2 transistors, 1 capacitor and 1 switch.

README

README.md

MasterSwordPCB

PCB created for Hack Club Solder

Slack Username: Joel Biswas

The PCB is in the shape of a master sword. The button acts as a toggle on/off switch. When the system is on, the potentiometer controls the vibration strength of a motor near the top of the sword. The circuit uses a transistor-based latch design to allow the button to act as a toggle.

Bill of Materials: Resistor (68k) - 1 Resistor (15k) - 1 Resistor (680) - 1 Resistor (330k) - 1 Resistor (470k) - 1 2N3904 transistor (NPN Type) - 2 Mini Motor Disc - 1 6mm Push Button - 1 Potentiometer - 1 CR2032 battery cell - 1

Schematics PCB 1 PCB 2 3D 1 3D 2

Parts

13
QtyValueFootprintReferences
22N3904Package_TO_SOT_THT:TO-92_InlineQ1, Q2
115kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR3
1330kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR4
1470kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR2
1680Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR5
168kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR1
1Battery_CellBattery:BatteryHolder_Keystone_3034_1x20mmBT1
1C_PolarizedCapacitor_THT:CP_Radial_D8.0mm_P5.00mmC1
1LOGOLOGOG***
1Motor_DCConnector_PinHeader_2.54mm:PinHeader_1x20_P2.54mm_VerticalM1
1R_PotentiometerPotentiometer_THT:Potentiometer_Vishay_T73YP_VerticalRV1
1SW_PushButton_Switch_THT:SW_PUSH_6mmSW1

Similar boards

  • 2 layers40 × 20 mmUsb uart, the printed circuit board in 3D

    Usb uart

    earthtojake/text-to-cad

    Design physical products with AI

    13 parts26kMIT
  • 2 layers35 × 29 mmMagSpoofTC, the printed circuit board in 3D

    MagSpoofTC

    samyk/magspoof

    A portable device that can spoof/emulate any magnetic stripe, credit card or hotel card "wirelessly", even on standard magstripe (non-NFC/RFID) readers.

    13 parts4.2k
  • 2 layers20.6 × 23.6 mmAO-03 signal amplifier, the printed circuit board in 3D

    AO-03 signal amplifier

    fossasia/pslab-scripts

    Pocket Science Lab - Scripts for Sensor Experiments

    13 parts1.6kApache-2.0
  • 2 layers47 × 35.6 mmMX7-C-35PL C11, the printed circuit board in 3D

    MX7-C-35PL C11

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    13 parts1.2k
  • 2 layers95 × 95 mmCube batteryboard, the printed circuit board in 3D

    Cube batteryboard

    willem-pennings/balancing-cube

    A cube that balances itself in a corner or edge using reaction wheels

    13 parts1.1kGPL-3.0
  • 2 layers15.2 × 20.3 mmPt100stick, the printed circuit board in 3D

    Pt100stick

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    13 parts1.1kGPL-3.0
  • 2 layers53.9 × 23.2 mmBuffer, the printed circuit board in 3D

    Buffer

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    13 parts1kGPL-3.0

Questions

How big is the Solder PCB?

It measures 295.5 × 295.3 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Solder use?

13 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Solder KiCad files?

From the JoelBiswas/MasterSwordPCB repository on GitHub, at the commit this page was made from: the board is Solder/Solder.kicad_pcb and its schematic Solder/Solder.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Solder design in my own project?

Its repository states no licence, so its author keeps all rights: ask JoelBiswas before reusing the design.