Skip to the content
2 layers250 × 90 mmController PCB, the printed circuit board in 3D

This branch is where we keep the website stuff running

Size
250 × 90 mm
Copper layers
2
Thickness
1.6 mm
Parts
14
Nets
29
Pads
84
Tracks, vias
163, 0
Pours
1
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
26 Oct 2023
Updated
30 Jun 2024

Overview

Controller PCB is an open-source printed circuit board by JoaoFFDuarte, from the JoaoFFDuarte/Handheld_Emulating_Project repository on GitHub. It is a 2-layer board of 250 × 90 mm with 14 parts on 29 nets, routed with 163 tracks and 0 vias.

It belongs with the AVR (ATmega, ATtiny) boards of this library.

README

README.md

This branch is where we keep the website stuff running

Parts

14
QtyValueFootprintReferences
11SW_PushButton_Switch_THT:SW_PUSH_6mmA1, B1, DOWN1, LEFT_TRIGGER1, LEFT1, RIGHT_TRIGGER1, RIGHT1, SEL_1, UP1, X1, Y1
2~Controller:JoystickJoystick_Left1, Joystick_Right1
1Arduino_Nano_v3.xModule:Arduino_NanoCentralBoard1

More from JoaoFFDuarte/Handheld_Emulating_Project

2
  • 2 layers55 × 102 mmLeft Controller PCB Bluetooth, the printed circuit board in 3D

    Left Controller PCB Bluetooth

    JoaoFFDuarte/Handheld_Emulating_Project

    This branch is where we keep the website stuff running

    13 parts2
  • 2 layers55 × 102 mmRight Controller PCB Bluetooth, the printed circuit board in 3D

    Right Controller PCB Bluetooth

    JoaoFFDuarte/Handheld_Emulating_Project

    This branch is where we keep the website stuff running

    13 parts2

Similar boards

  • 2 layers116.8 × 30 mmType d, the printed circuit board in 3D

    Type d

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    14 parts3kApache-2.0
  • 2 layers32 × 22 mmDiff driver, the printed circuit board in 3D

    Diff driver

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    14 parts990GPL-3.0
  • 2 layers34 × 45 mm2032Charger, the printed circuit board in 3D

    2032Charger

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    14 parts915
  • 2 layers34 × 109.9 mmTdisplay s3, the printed circuit board in 3D

    Tdisplay s3

    landonr/homeThing

    Wifi Smart Home Remotes that run on ESPHome

    14 parts551GPL-3.0
  • 2 layers45.3 × 42.7 mmMainPcb, the printed circuit board in 3D

    MainPcb

    adamb314/ServoProject

    Getting the most out of your hobby servo

    14 parts545
  • 2 layers42.5 × 28.8 mmC5VRX JACK DIY, the printed circuit board in 3D

    C5VRX JACK DIY

    Twotoz/C5VRX

    Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS

    14 parts515GPL-3.0
  • 2 layers62 × 24 mmMai button, the printed circuit board in 3D

    Mai button

    whowechina/mai_pico

    Pico controller for Maimai

    14 parts475

Questions

How big is the Controller PCB PCB?

It measures 250 × 90 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Controller PCB use?

14 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Controller PCB KiCad files?

From the JoaoFFDuarte/Handheld_Emulating_Project repository on GitHub, at the commit this page was made from: the board is Other_Files/Controllers/PCBs/Controller_Wired/Controller_PCB.kicad_pcb and its schematic Other_Files/Controllers/PCBs/Controller_Bluetooth/Left_Controller_PCB_Bluetooth/Left_Controller_PCB_Bluetooth.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Controller PCB design in my own project?

Its repository states no licence, so its author keeps all rights: ask JoaoFFDuarte before reusing the design.