Skip to the content
4 layers115.6 × 61.2 mmAllwinner V3s, the printed circuit board in 3D

Open-source hardware design for a minimal Allwinner V3s-based Single Board Computer, designed with KiCad 9.0.

Size
115.6 × 61.2 mm
Copper layers
4
Thickness
1.6 mm
Parts
74
Nets
111
Pads
379
Tracks, vias
1,195, 135
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
19 Jul 2026
Updated
19 Jul 2026

Overview

Allwinner V3s is an open-source printed circuit board by JmiguelRamriez, from the JmiguelRamriez/Custom-Linux-Single-Board-Computer repository on GitHub. It is a 4-layer board of 115.6 × 61.2 mm with 74 parts on 111 nets, routed with 1,195 tracks and 135 vias.

It is built around the EA3036CQBR and BAT54C. Its parts include 37 capacitors, 19 resistors, 6 connectors, 3 diodes and 3 inductors.

Main components

2

README

README.md

Custom Linux Single Board Computer

Open-source hardware design for a minimal Allwinner V3s-based Single Board Computer, designed with KiCad 9.0.

Features

  • Allwinner V3s — ARM Cortex-A7 @ 1.2 GHz with 64 MB integrated DDR2 RAM (SiP)
  • EA3036CQB PMIC — 3-channel regulator (1.2V / 1.8V / 3.3V) from 5V input
  • 10/100 Ethernet — integrated PHY in V3s + RJ45 with magnetics (Hanrun HR911105A)
  • USB Type-C — power input (5V) and USB OTG
  • USB Type-A — host port
  • microSD card slot (Molex 104031-0811, push-push) — boot and storage
  • Debug UART — 3-pin 2.54mm header for serial console
  • GPIO header — 2x20 pin, Raspberry Pi-like pinout
  • CR1220 coin cell holder — RTC backup
  • Boot/reset button

Pinout (J6 — 40-pin GPIO Header)

text
         +3.3V  (1)  (2)  +5V
     UART2_TX  (3)  (4)  +5V
     UART2_RX  (5)  (6)  GND
     I2C0_SCL  (7)  (8)  PWM0
     I2C0_SDA  (9) (10)  PWM1
    SPI0_MISO (11) (12)  GPIO_PE2
     SPI0_CLK (13) (14)  GND
      SPI0_CS (15) (16)  GPIO_PE4
    SPI0_MOSI (17) (18)  GPIO_PE6
    GPIO_PE0  (19) (20)  GND
         +3.3V (21) (22) GPIO_PE8
    GPIO_PE1  (23) (24)  GPIO_PE10
          GND (25) (26)  GPIO_PE12
    GPIO_PE3  (27) (28)  GPIO_PE14
    GPIO_PE5  (29) (30)  GND
    GPIO_PE7  (31) (32)  GPIO_PE15
    GPIO_PE9  (33) (34)  GND
    GPIO_PE11 (35) (36)  GPIO_PE16
    GPIO_PE13 (37) (38)  GPIO_PE17
          GND (39) (40)  +1V8

Gallery

PCB Layout

PCB

3D View

Diseño

Schematic

Esquematico

Board Specifications

ParameterValue
Layers4
Dimensions115.6 × 61.2 mm
PCB thickness1.6 mm
Copper finishENIG (gold)
Min track width0.15 mm
Min clearance0.15 mm
Via size0.6 mm / 0.3 mm drill

Repository Contents

File / FolderDescription
Allwinner V3s.kicad_schSchematic
Allwinner V3s.kicad_pcbPCB layout
Allwinner V3s.kicad_proKiCad project file
production/Gerbers, BOM, pick-and-place, netlist
Allwinner V3s-backups/Design backups

Production Files

The production/ folder contains everything needed for PCB fabrication and assembly:

  • Allwinner_V3s.zip — Gerber files + NC drill
  • bom.csv — Bill of Materials with LCSC part numbers
  • positions.csv — Pick-and-place centroid data
  • netlist.ipc — IPC-356 electrical test netlist

Datasheets

ComponentDatasheet
Allwinner V3sV3s Datasheet V1.0
EA3036C (PMIC)EA3036C datasheet
HR911105A (RJ45)HR911105A specification

Status

  • DRC: 1 warning (local footprint override, non-critical)

License

Open hardware — use, modify, and manufacture at your own risk.

Parts

74
QtyValueFootprintReferences
25100nfCapacitor_SMD:C_0603_1608MetricC1, C2, C3, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C22, C24 +9
1010kResistor_SMD:R_0603_1608MetricR0, R1, R2, R4, R5, R6, R8, R9, R11, R12
810ufCapacitor_SMD:C_0603_1608MetricC25, C26, C27, C28, C29, C30, C32, C34
4330Resistor_SMD:R_0603_1608MetricR3, R13, R17, R18
32.2uHInductor_SMD:L_0805_2012MetricL1, L2, L3
212pfCapacitor_SMD:C_0603_1608MetricC21, C23
212pfCapacitor_SMD:C_0402_1005MetricC36, C37
25.1kResistor_SMD:R_0603_1608MetricR14, R15
2LEDLED_SMD:LED_0805_2012MetricD2, D3
120kResistor_SMD:R_0603_1608MetricR10
124 MHzCrystal:Crystal_SMD_3225-4Pin_3.2x2.5mmY2
132.768 kHzCrystal:Crystal_SMD_3215-2Pin_3.2x1.5mmY1
145.3kResistor_SMD:R_0603_1608MetricR7
16.04kResistor_SMD:R_0603_1608MetricR16
1Allwinner_V3sAllwinner_SiPs:eLQFP-128_14x14_Pitch0.4mm_EPAD_5.72mmU1
1BAT54CPackage_TO_SOT_SMD:SOT-23D1
1Battery_CellBattery:BatteryHolder_Keystone_3000_1x12mmBT1
1Conn_01x03Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ2
1Conn_02x20_Odd_EvenConnector_PinHeader_2.54mm:PinHeader_2x20_P2.54mm_VerticalJ6
1EA3036CQBPackage_DFN_QFN:QFN-20-1EP_3x3mm_P0.4mm_EP1.65x1.65mmU2
1Micro_SD_Card_Det1Connector_Card:microSD_HC_Molex_104031-0811J1
1RJ45_LED_ShieldedConnector_RJ:RJ45_Hanrun_HR911105A_HorizontalJ3
1SW_PushButton_Switch_SMD:SW_Push_1P1T_NO_CK_KMR2SW1
1USB_AConnector_USB:USB_A_Molex_67643_HorizontalJ5
1USB_C_Receptacle_USB2.0_14PConnector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-17J4

Similar boards

  • 2 layers74.6 × 73.2 mmPanelized-2layer, the printed circuit board in 3D

    Panelized-2layer

    openconcepts-ar/accel2d

    This project aims to provide a graphics server system based on hardware accelerated graphics, and a easy way to develop the graphics primitives.

    241 parts1
  • 4 layers32 × 30 mmBreadbee, the printed circuit board in 3D

    Breadbee

    breadbee/breadbee

    Breadboard-able Cortex A7 dev board

    83 parts211GPL-3.0
  • 4 layers117.5 × 30 mm4reel ee, the printed circuit board in 3D

    4reel ee

    o7-machinehum/4reel

    Stereo machine vision camera for outdoor mobile robotics.

    179 parts34MIT
  • 4 layers86 × 56 mmRv1106, the printed circuit board in 3D

    Rv1106

    EPSILON0-dev/Raven1106

    Raspberry Pi-style SBC based on the Rockchip RV1106G3

    217 parts4
  • 4 layers92 × 64 mmDalishen pi h7p20, the printed circuit board in 3D

    Dalishen pi h7p20

    vllogic/dalishen_pi_h7p20

    # English # I. Introduction Hardware design format: KiCad 9.0.6 The CH32H417 serves as a USB 3.0 forwarder, with a unidirectional communication speed of up to 400MB/s, breaking the speed bottleneck of the 68013.

    237 parts3GPL-3.0
  • 4 layers30 × 51 mmCore, the printed circuit board in 3D

    Core

    Zhang-JK/Fragaria-Cake

    A linux development board based on allwinner F1C200s

    97 parts2
  • 4 layers100 × 60 mmMicro stratux, the printed circuit board in 3D

    Micro stratux

    ciborg971/micro_stratux

    compact and self powered project stratux fork

    145 parts1

Questions

How big is the Allwinner V3s PCB?

It measures 115.6 × 61.2 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Allwinner V3s use?

74 parts, built around the EA3036CQBR and BAT54C. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Allwinner V3s KiCad files?

From the JmiguelRamriez/Custom-Linux-Single-Board-Computer repository on GitHub, at the commit this page was made from: the board is Allwinner V3s.kicad_pcb and its schematic Allwinner V3s.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Allwinner V3s design in my own project?

Its repository states no licence, so its author keeps all rights: ask JmiguelRamriez before reusing the design.