4 layers204.7 × 68.5 mm
2 layers
AnalogFrontend
JaxRaffnix/AnalogFrontend- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 54
- Nets
- 62
- Pads
- 252
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 7 May 2026
- Updated
- 28 May 2026
Overview
AnalogFrontend is an open-source printed circuit board by JaxRaffnix, from the JaxRaffnix/AnalogFrontend repository on GitHub. It is a 2-layer board with 54 parts on 62 nets.
It is built around the MAX2752EUA+, RMS-30+ and SE2576L-R, with the SKY65405-21, LLP.2500.X.B.30 and ADF4351BCP among its other parts. Its parts include 20 capacitors, 16 resistors, 9 ICs, 7 connectors and 1 crystal.
Main components
7
MAX2752EUA+
MSOP-8-40℃~+85℃ 2.025GHz~2.165GHz 2.7V~5.5V 802.11、802.11b MSOP-8 RF Misc ICs and Modules ROHSMaxim Integrated (Analog Devices)ModulesRMS-30+
SMD-40℃~+85℃ -7dB 0Hz~1GHz 1 11dBm 1dBm 200MHz~3GHz 200MHz~3GHz 20dB 27dB SMD RF Mixers ROHSMini-CircuitsRF Mixers
SE2576L-R
QFN-16-EP(3x3)-40℃~+85℃ 15dB 2.4GHz~2.5GHz 32dBm 33dB 4.5V~5.5V 650mA QFN-16-EP(3x3) RF Amplifiers ROHSSkyworks SolutionsRF Amplifiers
SKY65405-21
DFN-6-EP(1.5x1.5)-40℃~+85℃ 1.1dB 12mA 15dB 2.4GHz 2.8V~5V Low-power mode DFN-6-EP(1.5x1.5) RF Amplifiers ROHSSkyworks SolutionsRF AmplifiersLLP.2500.X.B.30
SMD-8P,1.3x2mm0.5dB 0.5dB Low Pass SMD-8P,1.3x2mm RF Filters ROHSTaoglasRF Filters
ADF4351BCP
QFN32Wideband Synthesizer with Integrated VCOAnalog DevicesUncategorised
ATX-H11-F-25.000MHZ-F25-T
SMD3225-4P-40℃~+85℃ 1.68V~3.63V 25MHz 5.5mA CMOS ±2.5ppm SMD3225-4P Temperature Compensated Crystal Oscillators (TCXO) ROHSAbraconTemperature Compensated Crystal Oscillators (TCXO)
Parts
54| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 4.7muF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C4, C5, C6, C21, C22, C23 |
| 4 | 1n | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C16, C17, C18, C19 |
| 4 | Conn_Coaxial_x2 | Connector_Coaxial:SMA_Amphenol_132289_EdgeMount | J1, J2, J4, J5 |
| 3 | 0.1muF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C8, C9, C11 |
| 3 | 10pF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C7, C10, C12 |
| 2 | 200k | Resistor_SMD:R_0612_1632Metric_Pad1.18x3.40mm_HandSolder | R3, R14 |
| 2 | 33.2k | Resistor_SMD:R_0612_1632Metric_Pad1.18x3.40mm_HandSolder | R4, R13 |
| 2 | 453k | Resistor_SMD:R_0612_1632Metric_Pad1.18x3.40mm_HandSolder | R6, R15 |
| 2 | 49.9k | Resistor_SMD:R_0612_1632Metric_Pad1.18x3.40mm_HandSolder | R7, R16 |
| 2 | 499 | Resistor_SMD:R_0612_1632Metric_Pad1.18x3.40mm_HandSolder | R5, R12 |
| 2 | LT3042xMSE | Package_SO:MSOP-10-1EP_3x3mm_P0.5mm_EP1.68x1.88mm | U2, U3 |
| 2 | MAX2752EUA+ | SamacSys_Parts:SOP65P490X110-8N | IC5, IC7 |
| 2 | R | Resistor_SMD:R_0612_1632Metric_Pad1.18x3.40mm_HandSolder | R1, R2 |
| 2 | RMS-30+ | SamacSys_Parts:RMS30 | IC1, IC6 |
| 2 | USB_A | Connector_USB:USB3_A_Molex_48393-001 | J3, J6 |
| 1 | 1.2mu | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C15 |
| 1 | 10n | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C20 |
| 1 | 2.7mu | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C13 |
| 1 | 360 | Resistor_SMD:R_0612_1632Metric_Pad1.18x3.40mm_HandSolder | R9 |
| 1 | 39n | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C14 |
| 1 | 4.7k | Resistor_SMD:R_0612_1632Metric_Pad1.18x3.40mm_HandSolder | R8 |
| 1 | 51 | Resistor_SMD:R_0612_1632Metric_Pad1.18x3.40mm_HandSolder | R11 |
| 1 | 680 | Resistor_SMD:R_0612_1632Metric_Pad1.18x3.40mm_HandSolder | R10 |
| 1 | ADF4351 | Package_CSP:LFCSP-32-1EP_5x5mm_P0.5mm_EP3.25x3.25mm | U1 |
| 1 | ATX-H11-F-25.000MHz-F25-T | SamacSys_Parts:ATXH11F25000MHzF25T | Y1 |
| 1 | Conn_01x03_Pin | Connector_PinHeader_1.00mm:PinHeader_1x03_P1.00mm_Vertical_SMD_Pin1Left | J8 |
| 1 | LLP.2500.X.B.30 | SamacSys_Parts:LLP2500XB30 | FL1 |
| 1 | SE2576L-R | SamacSys_Parts:QFN50P300X300X90-17N-D | IC4 |
| 1 | SKY65405-21 | SamacSys_Parts:SKY6540521 | IC2 |
Similar boards
- 4 layers170 × 100 mm
- 2 layers100 × 100 mm
- 4 layers61.5 × 24.4 mm
- 2 layers82.1 × 82.1 mm
Uncut Gem
QuantumVillage/UncutGem
A prototype Full Stack fully Open Source NV Center Diamond Magnetometer
207 parts210AGPL-3.0 - 2 layers118.5 × 94.5 mm
WaveLab24GHz
PA0MHE/Wavelab-24G-Addon-module
Can be used as addon module for the Wavelab 23X1008XP module, which was available during the 2021-2022 timeframe on www.ebay.pl seller:bisonelectronics-sp2jyr The module converts the first-IF 2364MHz to 432MHz (or…
207 parts5MIT - 4 layers40 × 33 mm
Version 2.0
EObianom/ADF4351
This repository is for ADF4351 registory calculation and hardware design.
50 parts2MIT - 4 layers71.1 × 124.5 mm
ADL5375 revAR
JQIamo/ESB_Signal_Generator
Modulation signal generator for electronic sideband locking with a Pound-Drever-Hall cavity
143 parts2
Questions
What parts does the AnalogFrontend use?
54 parts, built around the MAX2752EUA+, RMS-30+, SE2576L-R and SKY65405-21. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the AnalogFrontend KiCad files?
From the JaxRaffnix/AnalogFrontend repository on GitHub, at the commit this page was made from: the board is AnalogFrontend.kicad_pcb and its schematic AnalogFrontend.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the AnalogFrontend design in my own project?
Its repository states no licence, so its author keeps all rights: ask JaxRaffnix before reusing the design.