
Encoder
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

Just a small PCB-based adapter for Zigbee controller to led strips.
LedConnector is an open-source printed circuit board by Jatsekku, from the Jatsekku/ledConnector repository on GitHub. It is a 2-layer board of 30 × 15.5 mm with 7 parts on 6 nets, routed with 24 tracks and 0 vias.
It belongs with the radio and wireless boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | Conn_01x01_Pin | Connector_Pin:Pin_D1.1mm_L8.5mm_W2.5mm_FlatFork | J2, J3, J4, J5, J6, J7 |
| 1 | Conn_01x06_Pin | Connector_PinHeader_2.00mm:PinHeader_1x06_P2.00mm_Vertical | J1 |

byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.



AxxAxx/AxxSolder
STM32 Based soldering station for JBC cartridges, 9-24 VDC and USB-PD power


jamro/tiny-engineer
A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

It measures 30 × 15.5 mm and has 2 copper layers, 1.6 mm thick.
7 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Jatsekku/ledConnector repository on GitHub, at the commit this page was made from: the board is ledConnector.kicad_pcb and its schematic ledConnector.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Jatsekku before reusing the design.