Skip to the content
2 layers22.8 × 10.8 mmSimple usb dfu tool, the printed circuit board in 3D

Simple usb dfu tool

Jana-Marie/simple-dfu-tool

simple helper for flashing devices via (USB) DFU

Size
22.8 × 10.8 mm
Copper layers
2
Thickness
1.6 mm
Parts
6
Nets
13
Pads
56
Tracks, vias
114, 14
Pours
1
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
27 Nov 2022
Updated
27 Nov 2022

Overview

Simple usb dfu tool is an open-source printed circuit board by Jana-Marie, from the Jana-Marie/simple-dfu-tool repository on GitHub. It is a 2-layer board of 22.8 × 10.8 mm with 6 parts on 13 nets, routed with 114 tracks and 14 vias.

It is built around the AO3401A. Its parts include 2 transistors, 2 connectors, 1 resistor and 1 switch.

Main components

1

README

README.md

simple-dfu-tool

Just a smol board to temporarily break a projects power supply to let it boot into DFU mode without unplugging the whole USB cable.

Parts

6
QtyValueFootprintReferences
2AO3401APackage_TO_SOT_SMD:SOT-23Q1, Q2
2USB_C_Receptacle_USB2.0otter:USB-C 16PinJ1, J2
15k1otter:R_0402R1
1SW_Pushotter:PTS810_LLSW1

Similar boards

  • 2 layers192.2 × 150.5 mmDjinn, the printed circuit board in 3D

    Djinn

    tzarc/keyboards

    @tzarc's custom keyboard designs.

    292 parts993CERN-OHL-S-2.0
  • 4 layers102.9 × 96.7 mmPicoGUS chipdown, the printed circuit board in 3D

    PicoGUS chipdown

    polpo/picogus

    Emulation of ISA sound cards and CD-ROM on Raspberry Pi Pico (GUS, SB/Adlib, MPU-401, Tandy, CMS, Panasonic CD-ROM) with USB mouse/joystick support

    99 parts805
  • 6 layers237.9 × 80.5 mmXG Mobile Dock, the printed circuit board in 3D

    XG Mobile Dock

    osy/XG_Mobile_Station

    Open source eGPU dock for ROG Ally and ROG Flow

    300 parts712CC-BY-4.0
  • 2 layers60 × 111.3 mmSilkscreen pcb, the printed circuit board in 3D

    Silkscreen pcb

    iandchasse/silkscreen-pcb

    Silkscreen: open-hardware ESP32-S3 e-paper reader mainboard (KiCad 9). Formerly the de-link hub.

    189 parts589CERN-OHL-S-2.0
  • 2 layers89.2 × 82.6 mmDesktop 50 Pin TopConn, the printed circuit board in 3D

    Desktop 50 Pin TopConn

    BlueSCSI/BlueSCSI-v2

    BlueSCSI v2/Ultra - an open source, open hardware, SCSI emulator using the Pi Pico PR2040 and Pico 2 RP2350

    108 parts459GPL-3.0
  • 4 layers55 × 55 mmRBoard, the printed circuit board in 3D

    RBoard

    pms67/LittleBrain-STM32F4-Sensorboard

    STM32F4-based PCB interfacing with a variety of sensors.

    90 parts339
  • 6 layers55 × 95 mmEcho r1-rev1, the printed circuit board in 3D

    Echo r1-rev1

    amachronic/echoplayer

    Echo - Open Hardware Music Player

    154 parts281CERN-OHL-S-2.0
  • 4 layers243.8 × 171.5 mmNeotron Pico, the printed circuit board in 3D

    Neotron Pico

    Neotron-Compute/Neotron-Pico

    A Neotron powered by the Raspberry Pi Pico

    242 parts250

Questions

How big is the Simple usb dfu tool PCB?

It measures 22.8 × 10.8 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Simple usb dfu tool use?

6 parts, built around the AO3401A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Simple usb dfu tool KiCad files?

From the Jana-Marie/simple-dfu-tool repository on GitHub, at the commit this page was made from: the board is simple-usb-dfu-tool.kicad_pcb and its schematic simple-usb-dfu-tool.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Simple usb dfu tool design in my own project?

Its repository states no licence, so its author keeps all rights: ask Jana-Marie before reusing the design.